3DMakerPro Magic Swift Plus
Computer Requirements
- Minimum: Intel Core i5 8th, 16G8 RAM, MX250 GPU with 2GB VRAM
- Recommended: Intel Core i7 8th, 16GB RAM, NVDIA1060 GPU with 4GB VRAM
HARDWARE CONNECTION
Plug the USB3.0 end into your computer’s USB3.0 port Plug the power connector into the power adapter.
The other end of the two plugs into the end of the device. Plug the turntable cable into the side connector of the device.
Installation Guide
Device Cable
Insert the power plug at the device end by aligning the raised point with the interface dot mark.
Pinch the side wall of the plug when pulling it out, and then pull it out.
Turntable Cable
One end of the turntable cable plugs into the jack on the side of the unit.
The other end plugs into the connector on the turntable.
PACKING LIST
To prevent antivirus software from blocking the driver, please uninstall the antivirus software.
Magic Swift Plus Luxury
Magic Swift Plus Premium
Specifications
Magic Swift Plus
| Monochrome Versions
|
Color Versions
|
|
| Black object scanning | Supports | – |
| Outdoor scanning | Supports | – |
| Color scanning | – | Supports |
| Light source | NIR spectroscopy | Non-contacting White Light |
| Accuracy | 0.1mm | |
| Resolution | 0.25mm | |
| Single capture range | 400X250mm | |
| Working distance | 650±250mm | |
| Scan speed | Up to 10 fps | |
| Technology | Coded Structured Light | |
| Output format | OBJ/STU/ASC | |
| USB interface | USB 3.0 | |
| Texture scan | Supports | |
| Compatible system | WIN10/11，MacOS 11/12(contains the M1 chip) | |
| Minimum computer requirements | Intel Core i5 8th, 8 GB RAM, MX250 GPU with 2 GB VRAM | |
| Recommended computer requirements | Intel Core i7 8th, 16GB RAM, NVDIA1060 GPU with 4GB VRAM | |
Documents / Resources
 | Magic Swift Plus |
References
- User Manualmanual.tools
Published: January 28, 2026