3B Medical iCode Connect
Contents
hide
REGISTER FOR A NEW PROVIDER ACCOUNT
Click the Register for a New Provider Account link at the home page- Fill out everything with a red asterisk (*)
- Submit and wait for your email with a link
ADD PATIENTS TO YOUR RECORD DATABASE
Click Add Patients on the top of the screen- Fill out everything with a red asterisk (*)
- Press submit
ADDING SD CARD DOWNLOADS
SD card downloads can be uploaded using the automatic uploader- On the top of the screen click Add SD Card Download
- Click on the lettering that says Click here to do this download automatically using the iCode Connect Uploader
- The automated system will walk you through downloading the .USR file, follow the screen prompts.
- The file will be in your list of SD card downloads to view or run a pdf report
WI-FI AND CELLULAR UPLOADS
Wi-Fi and Cellular modems must be paired to the CPAP machine- Once paired the PIN number is found in the patient menu in the about section, this is necessary for the remote device setting changes
- Wi-Fi and Cellular uploads will be updated once every 24 hours
- Modem uploads are found in the wireless uploads section
ADDING AN ICODE REPORT
Click Add an iCode Report- Enter the 16 digit icode number found on the CPAP screen
- Press submit
- The icode summary compliance report can be found in the icode reports section and can be generated as a pdf report
ADDING USERS
Click Add User on the top of the screen- Enter information including username and password
- Choose clinician or administrative permissions
- Once submitted icodeconnect will send an email to the new user inviting them to the account
ADDING A PHYSICIAN
There are several options for physicians in icodeconnect- Physicians may request an account at the home page
- You may create an account for a physician or opt to invite a physician into the icodeconnect platform
- You may add physician info without granting permission to view the patient
- Once a physician is registered in icodeconnect, he will be able to view any patient assigned to him from any location
ADDING A SUBSIDIARY PROVIDER
Subsidiary providers are often extra locations or clinicians attached to the patient- Click the tab Provider, then Subsidiary Provider
- Fill out all fields
- The subsidiary provider will receive an email inviting them to join icodeconnect
- You may now assign patient access to the subsidiary provider
EDITING PATIENT INFORMATION
Patient information may be changed at any time- When adding a new cpap please remember to add the patients new pin if necessary
REMOTE DEVICE SETTINGS
For all modem patients click Edit Device Setting on the top of the page- Change parameters and click submit
- Device setting changes will be uploaded the next time the patient turns on their CPAP
CUSTOMERS SUPPORT
Documents / Resources
 |
3B Medical iCode Connect [pdf] User Guide iCode Connect, Connect |
