ome Glencrest Ceiling Fan Umhlahlandlela Womsebenzisi
ome Glencrest Ceiling Fan

OKUQUKETHWE INCWADI

  • I-Canopy
    OKUQUKETHWE KWE-HARDWARE
  • Ikhava yeCanopy
    OKUQUKETHWE INCWADI
    OKUQUKETHWE INCWADI
  • Downrod
    OKUQUKETHWE INCWADI
  • OKUQUKETHWE INCWADI
  • OKUQUKETHWE INCWADI
  • OKUQUKETHWE INCWADI
  • I-bulb (x 3)
    OKUQUKETHWE INCWADI

OKUQUKETHWE KWE-HARDWARE

  • I-Blade Screw (x 15)
    OKUQUKETHWE KWE-HARDWARE
  • I-Blade Washer (x 15)
    OKUQUKETHWE KWE-HARDWARE
  • Isixhumi Sentambo (x 3)
    OKUQUKETHWE KWE-HARDWARE
  • Ikhithi yokulinganisa ye-Blade
    OKUQUKETHWE KWE-HARDWARE
  • Isandiso se-Pull Chain (x 2)
    OKUQUKETHWE KWE-HARDWARE

Qaphela: Ezinye izingxenyekazi zekhompuyutha ezengeziwe zingase zifakwe. Inani elibalwe ngenhla inombolo edingekayo ukuze kufakwe.

ULWAZI LOKUPHEPHA

Sicela ufunde futhi uqonde yonke le ncwajana ngaphambi kokuzama ukuhlanganisa, ukusebenzisa noma ukufaka umkhiqizo.

  • Ngaphambi kokuthi uqale ukufaka ifeni, nqamula amandla ngokususa amafyuzi noma ukucisha ama-breakers wesifunda.
  • Qinisekisa ukuthi konke ukuxhunywa kukagesi kuthobela amakhodi endawo, izimiso, Ikhodi Kagesi Kazwelonke Qasha osebenza ngogesi noma thintana nencwadi yokuzenzela uma ungajwayele ukufaka izintambo zikagesi.
  • Qiniseka ukuthi indawo yokufaka oyikhethayo ivumela ubuncane bamamitha ayi-7 ukusuka kumabhande kuya phansi futhi okungenani amasentimitha angama-30 ukusuka esihlokweni sezinhlamvu kuye kunoma yikuphi ukuvimbela.
  • Isisindo se-fan singamakhilogremu angama-20.35.

Isithonjana EsiyisixwayisoINGOZI: Uma usebenzisa ibhokisi lokuphumayo elikhona, qiniseka ukuthi linamathiselwe ngokuvikelekile esakhiweni sesakhiwo futhi lingasekela isisindo esigcwele sefeni. Ukwehluleka kulokhu kungaholela ekulimaleni okubi kakhulu noma ekufeni. Ukuzinza kwebhokisi lokuphumayo kubalulekile ekwehliseni ukuntengantenga nomsindo kufeni ngemva kokuqedwa kokufakwa.
Isithonjana Esiyisixwayiso ISEXWAYISO: Ukuze ugweme ukulimala komuntu siqu, ukusetshenziswa kwamagilavu ​​kungase kudingeke ngenkathi ubamba izingxenye zabalandeli ezinemiphetho ebukhali.
Isithonjana Esiyisixwayiso ISEXWAYISO: Ukusebenzisa iswishi ye-dimmer yebanga eligcwele ukuze ulawule isivinini sabalandeli kuzobangela umsindo ovungamayo ovela kufeni. Ukuze unciphise ingozi yomlilo noma ukushaqeka kukagesi, UNGAsebenzisi iswishi ye-dimmer enobubanzi obugcwele ukuze ulawule isivinini sabalandeli.
Isithonjana Esiyisixwayiso ISEXWAYISO: Ukunciphisa ubungozi bomlilo, ukushaywa ugesi noma ukulimala komuntu siqu, faka ifeni ebhokisini lokuphuma elibhalwe ukuthi "YAMUKELEKILE NGOKUSEKELWA NGABALANDELI" bese usebenzisa izikulufu ezikhuphukayo ezinikezwe ibhokisi lokuphuma. Amabhokisi amaningi ezitolo asetshenziselwa ukuxhasa izinto zokukhanyisa awamukeleki ekusekeleni abalandeli futhi angadinga ukushintshwa. Xhumana nogesi oqeqeshiwe uma ungabaza. Vikela ibhokisi lokuphuma ngqo esakhiweni sokwakha. Ibhokisi lokuphuma nokusekelwa kwalo kumele likwazi ukuxhasa isisindo se-fan (okungenani ama-35 lbs.).
Isithonjana Esiyisixwayiso ISEXWAYISO: Ukuze kuncishiswe ingozi yomlilo, ukushaqeka kukagesi noma ukulimala komuntu siqu, izixhumi zezintambo ezinikezwe le fan ziklanyelwe ukwamukela intambo yendlu eyodwa kuphela eyi-12-gauge kanye nezintambo ezimbili zokuhola ezivela kusifeni. Uma izintambo zendlu yakho zinkulu kunegeji engu-12 futhi/noma kunezintambo zendlu ezingaphezu kweyodwa ukuze zixhumeke ezintanjeni eziholayo zabalandeli ababili, thintana nosebenza ngogesi ukuze uthole izixhumi zezintambo ezinosayizi ofanelekile ozozisebenzisa.
Isithonjana Esiyisixwayiso ISEXWAYISO: Ukunciphisa ingozi yomlilo, ukushaqeka kukagesi noma ukulimala komuntu siqu, ungagobi izingalo ze-blade lapho uzifaka, ulinganise ama-blade noma uhlanza ifeni. Ungafaki izinto phakathi kwama-fan blade ajikelezayo.
Isithonjana Esiyisixwayiso ISEXWAYISO: Ukuze unciphise ubungozi bokulimala komuntu siqu, sebenzisa izingxenye ezinikezwe ngale fan. Ukusetshenziswa kwezingxenye ngaphandle kwalezo ezinikezwe le fan kuzovala iwaranti.
Isithonjana Esiyisixwayiso QAPHELA: Qiniseka ukuthi ibhokisi lokuphuma lisisekelo kahle noma kukhona ucingo lwaphansi (oluhlaza noma olungenalutho).
Isithonjana Esiyisixwayiso QAPHELA: Hlola ngokucophelela zonke izikulufu, amabhawodi, namantongomane ekuhlanganiseni kwabalandeli qinisekisa ukuthi avikelekile.

Le mishini ihlolwe kwatholakala ukuthi iyahambisana nemikhawulo yedivayisi yedijithali yeClass B, ngokuya kwengxenye 15 yemithetho yeCCC. Le mikhawulo yakhelwe ukuhlinzeka ngokuvikelwa okufanele ekuphazanyisweni okuyingozi ekufakweni kwendawo yokuhlala.
Le mishini ikhiqiza, isebenzise futhi ingakhipha amandla amaza omsakazo futhi, uma ingafakiwe futhi isetshenziswe ngokuyalelwa, ingadala ukuphazamiseka okuyingozi ekuxhumaneni nomsakazo. Kodwa-ke, asikho isiqinisekiso sokuthi ukuphazamiseka ngeke kwenzeke ekufakweni okuthile. Uma lo mshini ubangela ukuphazamiseka okuyingozi emsakazweni noma ekwamukelweni kwethelevishini, okunganqunywa ngokucisha nokuvula imishini, umsebenzisi uyakhuthazwa ukuthi azame ukulungisa ukuphazamiseka ngesinyathelo esisodwa noma eziningi ezilandelayo:

  • Qondisa kabusha noma ususe i-antenna etholayo.
  • Khulisa ukwehlukana phakathi kwemishini nesamukeli
  • Xhuma okokusebenza ngaphakathi nangaphandle kwisekethe ehlukile kunaleyo exhunywe kuyo umamukeli.
  • Xhumana nomthengisi noma uchwepheshe we-TV / we-TV onolwazi ukuthola usizo.
    Uyacelwa uqaphele ukuthi izinguquko noma ukuguqulwa okungavunyelwanga ngokusobala yiqembu elibhekele ukuthobela kungabhebhethekisa igunya lomsebenzisi lokusebenzisa okokusebenza.

UKUNAKEKELA NOKUTHENGA

Okungenani kabili ngonyaka, yehlisa umbhede ukuze ubheke umhlangano we-downrod futhi uqinise zonke izikulufo kufeni. Hlanza izindlu zezinsimbi ngamabhulashi ngebhulashi elithambile noma ngendwangu engenalutho ukugwema ukunwaya isiphetho.
Okubalulekile: Vala ugesi omkhulu ngaphambi kokuba uqale noma yimuphi umsebenzi wokulungisa. Ungasebenzisi amanzi noma isikhangisoamp indwangu yokuhlanza ifeni.

UKUHLELA

Ngaphambi kokuqala ukuhlanganisa lo mkhiqizo, qiniseka ukuthi zonke izingxenye zikhona. Qhathanisa zonke izingxenye nohlu lokuqukethwe kwephakheji kanye nohlu lokuqukethwe kwehadiwe. Uma noma iyiphi ingxenye ishoda noma ilimele, ungazami ukuhlanganisa umkhiqizo.
Isikhathi sokuhlanganisa esilinganiselwe: amahora ama-2

Amathuluzi adingekayo (awafakiwe): Itheyiphu kagesi, i-Phillips Screwdriver, i-Safety Glasses, i-Step Ladder, ne-Wire Strippers.

  1. Vala amandla kufeni ebhokisini le-breaker kanye neswishi yodonga (Umfanekiso 1.1). INGOZI: Ukwehluleka ukunqamula ugesi ngaphambi kokufaka kungase kubangele ukulimala okubi kakhulu noma ukufa.
  2. Khetha okukodwa kokukhethwa kukho kokukhweza (Umfanekiso 1.2)
    I-Standard Mount - ifaneleka kakhulu ophahleni 8 izinyawo noma ngaphezulu. Ukuze uthole uphahla oluphakeme kakhulu, sebenzisa i-downrod ende (engafakiwe).
    I-Angle Mount - ifaneleka kakhulu usilingi onama-angled noma ophahleni. I-downrod ende kwesinye isikhathi iyadingeka ukuze kuqinisekiswe ukucaciswa okufanele kwe-blade. Qinisekisa ukuthi i-engeli yosilingi ayibi ngaphezu kwama-degree angu-16.
    Ukufakwa kwe-Flushmount – ayitholakali kule modeli.
    Ukufakwa kwe-Closemount - ifaneleka kakhulu ophahleni 8 izinyawo noma ngaphansi.
  3. Khetha indawo efanelekayo - Qinisekisa ukuthi ama-blades azoba okungenani amasentimitha angama-30 kusuka kunoma yikuphi ukuvimbela. Futhi hlola ubude be-downrod ukuqinisekisa ukuthi ama-blades azoba okungenani amamitha ayi-7 ngaphezu kwephansi (Umfanekiso 1.3).

Umfanekiso we-1.1
UKUHLELA
Umfanekiso we-1.2
UKUHLELA
Umfanekiso we-1.3
UKUHLELA
UKUFAKA KOKUQALA

  1. Thuthukisa zonke izikulufu ezine zabakaki abakhuphukayo futhi ususe ngokuphelele izikulufu ezimbili ezimbotsheni eziyindilinga ku-canopy. Bese ususa ubakaki wokukhweza ku-canopy bese ulondoloza izikulufu ukuze uzisebenzise kamuva (Umfanekiso 2.1).
  2. Faka ubakaki okhwezwayo ebhokisini lokuphumayo (elithengiswa ngokwehlukana) usebenzisa izikulufu namawasha anikezwe nebhokisi lokuphuma (Umfanekiso 2.2).
  3. Susa izikulufu zenjini eziyi-10 ngaphansi kwenjini. Lahla amabhlogo enjini, kodwa gcina izikulufu zenjini ukuze ufakwe izingalo ze-blade (Umfanekiso 2.3).

Ukuze uthole CLOSEMOUNT IMIYALELO, yeqela ekhasini 6

Umfanekiso we-2.1
Ukufakwa Imiyalelo
Umfanekiso we-2.2
Ukufakwa Imiyalelo
Umfanekiso we-2.3
Ukufakwa Imiyalelo

IZINGA EZIJWAYELEKILE NEZE-ANGLE

  1. Susa isiqeshana se-downrod nephinikhodi ye-downrod kusuka ku-downrod. Bese ukhulula kancane izikulufu ezibekiwe ejokeni phezulu komhlangano wemoto (Umfanekiso 3.1).
  2. Yondla izintambo zefeni ngesembozo sejoka, i-canopy kanye ne-downrod (Umfanekiso 3.2).
  3. Shelelisela i-downrod ejokeni lokuhlanganisa injini. Qondanisa izimbobo futhi ufake kabusha iphinikhodi ye-downrod nesiqeshana se-downrod futhi uvikeleke ngezikulufo ezimisiwe (Umfanekiso 3.3).
  4. Kuye ngobude be-downrod oyisebenzisayo, ungase ufune ukusika izintambo zabalandeli ukuze wenze izintambo zibe lula. Ngemva kokudonsa izintambo kuyo yonke indlela eya phansi, linganisa amayintshi angu-8 ocingo. Sika intambo eyeqile usebenzisa izinqamuleli zezintambo (azifakiwe). Bese ukhumula i-intshi engu-1/2 ye-insulation kusukela ekugcineni kwentambo ngayinye (Umfanekiso 3.4).
  5. Faka umkhawulo webhola we-downrod ekuvuleni kukabakaki okhuphukayo (Umfanekiso 3.5). ISEXWAYISO: Ukwehluleka ukuqondanisa i-slot ebholeni ngokuthepha kubakaki abakhwezwayo kungase kubangele ukuba ifeni ziwe, okungase kubangele ukulimala noma ukufa.

Yeqela ku-FINAL INSTALLATION, ikhasi 6.
Umfanekiso we-3.1
ANGLE MOUNT IMIYALELO
Umfanekiso we-3.2
ANGLE MOUNT IMIYALELO
Umfanekiso we-3.3
ANGLE MOUNT IMIYALELO
Umfanekiso we-3.4
ANGLE MOUNT IMIYALELO
Umfanekiso we-3.5
ANGLE MOUNT IMIYALELO

IMIYALELO YE-CLOSEMOUNT (kuyakhetheka)

  1. Susa ikhava ye-canopy kusukela phansi kwe-canopy (Figura 4.1).
  2. Susa izikulufu ezintathu ze-Phillips-head closemount kusuka phezulu kwe-motor assembly. Bese uqondanisa i-canopy nezimbobo phezulu kwe-motor assembly. Izimbobo ezinkulu ku-canopy zizohlanganisa izikulufu ezisele. Vikela i-canopy phezulu kwenhlangano ye-motor ngezikulufo ezikhishwe ngaphambilini ze-closemount (Umfanekiso 4.2).
  3. Phakamisa umhlangano we-motor bese ubeka i-canopy ku-huku yebakaki ekhuphukayo ukuze ukhulule izandla ngesikhathi senqubo yezintambo (Umfanekiso 4.3).
    Umfanekiso we-4.1
    CLOSEMOUNT IMIYALELO
    Umfanekiso we-4.2
    CLOSEMOUNT IMIYALELO
    Umfanekiso we-4.3
    CLOSEMOUNT IMIYALELO

UKUFAKWA KOKUGCINA

  1. Sebenzisa izixhumi zocingo ukuxhuma izintambo zasendlini kanye nezintambo zabalandeli ngokomdwebo (Umfanekiso 5.1) kanye nezinyathelo ezilandelayo:
    • Xhuma intambo eluhlaza okotshani obusuka phansi kanye nobakaki wokukhweza uye eNtanjeni yokuhlinzeka nge-Bare/Green (ephansi). Qaphela: Ukufakwa kwe-Closemount akusebenzisi i-downrod, ngakho-ke kuzoba nezintambo ezimbili kuphela eziGreen ukuze zixhumeke.
    • Xhuma intambo eMhlophe kusukela kufeni ukuya entanjeni yokunikezela ngezinto Ezimhlophe (emaphakathi).
    • Xhuma izintambo eziMnyama neziluhlaza kusuka kufeni ukuya entanjeni yokunikezela ngeMnyama (eshisayo).
      Qaphela: Uma kukhona intambo yesibili yokunikeza okushisayo ebhokisini lokuphumayo, ixhume entanjeni yefeni eluhlaza okwesibhakabhaka (amandla akhanyayo) ukuze uthole ukukhanya okuhlukene nokulawula ifeni.
  2. Qondanisa i-canopy phezu kwezikulufu zabakaki abafakiweyo. Beka i-J-slot ye-canopy kuzikulufu zobakaki bese uzungezisa ngokwewashi (Umfanekiso 5.2).
  3. Vikela umbhede ngezikulufo ezimbili eziboshiwe ezazisuswe ngaphambili. Qinisa zonke izikulufu zobakaki ezibekiwe ngokuphepha (Umfanekiso 5.3).Umfanekiso we-5.1
    UKUFAKWA KOKUGCINA
    Umfanekiso we-5.2
    UKUFAKWA KOKUGCINA
    Umfanekiso we-5.3
    UKUFAKWA KOKUGCINA
  4. Faka kancane izikulufu ze-blade kanye newasha ye-blade ngokusebenzisa i-blade nasengalweni ye-blade. Qinisa isikulufu seblade ngayinye uqale ngesiphakathi nendawo. Phinda lesi sinyathelo kuma-blade nezingalo ezisele (Umfanekiso 5.4).
  5. Faka ingalo ye-blade engxenyeni engezansi ye-motor assembly usebenzisa izikulufu eziyishumi ezikhishwe ngaphambili ze-motor (Umfanekiso 5.5).
  6. Susa esinye sezikulufu ze-fitter plate ku-fitter plate bese ukhulula ezinye ezimbili. Bese uphakamisa i-pan yokukhanya bese ubeka izimbobo zokhiye ezimbili epanini lokukhanya phezu kwezikulufu ezimbili ezixegiwe ze-fitter plate. Vula i-pan yokukhanya iye ngendlela yewashi futhi uyivikele usebenzisa isikulufu se-fitter plate esikhishwe ngaphambilini. Qinisa zonke izikulufi zamapuleti e-fitter (Umfanekiso 5.6).
  7. Susa esinye sezikulufu ezintathu zepani elikhanyayo epanini lokukhanya bese ukhulula ezinye izikulufu ezimbili. Bese, xhuma isixhumi samaphini angu-9 kusukela kufeni kuya kuzixhumi ezingamaphini angu-9 kusukela kukhithi yokukhanya. Qondanisa izimbobo zesikulufu zekhithi yokukhanya phezu kwezikulufu zepani ezixegayo bese ujike ubheke njengewashi. Faka esikhundleni isikulufu sepani elikhanyayo elikhishwe ngaphambilini. Qinisa zonke izikulufu (Umfanekiso 5.7).
  8. Faka ama-LED amathathu e-E26-base LED bulbs (Umfanekiso 5.8).
  9. Susa okokugcina, ikepisi lokugcina, i-hex nut, newasha yerabha entweni enentambo kukhithi yokukhanya (Umfanekiso 5.9).
    Umfanekiso we-5.4
    UKUFAKWA KOKUGCINA
    Umfanekiso we-5.5
    UKUFAKWA KOKUGCINA
    Umfanekiso we-5.6
    UKUFAKWA KOKUGCINA
    Umfanekiso we-5.7
    UKUFAKWA KOKUGCINA
    Umfanekiso we-5.8
    UKUFAKWA KOKUGCINA
    Umfanekiso we-5.9
    UKUFAKWA KOKUGCINA
  10. Phaka amaketango okudonsa ngezimbobo ezingephakathi nendawo endishini yengilazi. Phakamisa isitsha sengilazi phezu kwenduku enentambo yekhithi yokukhanya futhi uyivikele usebenzisa iwasha yerabha ne-hex nut. Phakamisa ikepisi lokugcina phezu kwenduku enentambo futhi uyivikele ngesiphetho (Umfanekiso 5.10).
  11. Namathisela izandiso zeketango lokudonsa emaketangeni okudonsa. Qaphela: Uma ubhekene neswishi ehlehlayo, iketango lokudonsa elikhanyayo lingakwesokunxele futhi iketango lokudonsa ifeni lingakwesokudla (Umfanekiso 5.11).
  12. Vula amandla ukuze uvuthele ebhokisini lephuli kanye nasekushintsheni kodonga (Umfanekiso 5.12). Ukuhlangana kuphelile.
    Umfanekiso we-5.10
    UKUFAKWA KOKUGCINA
    Umfanekiso we-5.11
    UKUFAKWA KOKUGCINA
    Umfanekiso we-5.12
    UKUFAKWA KOKUGCINA

UKUVULA IMIYALELO

  1. I-fan pull chain inezindawo ezine zokulawula isivinini sabalandeli. Ukudonsa okukodwa kuphezulu, okubili kumaphakathi, okuthathu kuphansi futhi okune kucisha ifeni. Iketango lokudonsa ukukhanya linezindawo ezimbili zokulawula ukukhanya, ukuvala nokuvala (Umfanekiso 6.1).
  2. Sebenzisa iswishi ehlehlayo ukuze uthuthukise ifeni yakho ukuze isebenze ngesizini. Esimweni sezulu esifudumele, phusha iswishi ehlehla kwesokunxele eholela ekugelezeni komoya okuya phansi okudala umphumela wokupholisa umoya. Esimweni sezulu esipholile, cindezela inkinobho yokuhlehla kwesokudla eholela ekugelezeni komoya phezulu okuzosiza ukuhambisa umoya oshisayo ophahleni (Umfanekiso 6.2).
    Umfanekiso we-6.1
    UKUFAKWA KOKUGCINA
    Umfanekiso we-6.2
    UKUVULA IMIYALELO

UKUHLELA

Isexwayiso: Vala ugesi ngaphambi kokuthi uqale noma yimuphi umsebenzi wokulungisa

I-PROBLEM

ISENZO SOKULUNGISA

Ifeni ayinyakazi.

  1. Qina ngokuqinile inkinobho yokuhlehla ngakwesokunxele noma kwesokudla ngokuphelele.
  2. Qiniseka ukuthi iswishi yodonga ivuliwe.
  3. Vula amandla noma uhlole i-fuse (breaker).
  4. Vala ugesi bese ubheka zonke izixhumi ebhokisini lokuphuma kusilingi

Umlandeli unomsindo.

  1. Hlola futhi uqinise zonke izikulufu ezibamba izindwani zezingalo ezingalweni nakwezimoto.
  2. Faka esikhundleni sensimbi eqhekekile.
  3. Musa ukusebenzisa isishintshi sobubanzi obugcwele bokulawula ijubane le-fan.
  4. Qinisekisa ukuthi ibhokisi lokuphuma livikelekile esakhiweni sokwakha.
  5. Qinisekisa ukuthi ubakaki wokufaka uvikelekile ebhokisini lokuphuma nokuthi izikulufo ziqinile.

I-fan inyakaza ngokweqile

  1. Hlola futhi uqinise zonke izikulufo ezigcina ama-fan blade ezingalweni ze-blade nezingalo ze-blade ziye emotweni.
  2. Shintsha i-blade eyodwa nge-blade kusuka kolunye uhlangothi, noma ulinganise i-fan usebenzisa i-blade kit yokulinganisa.
  3. Vala ugesi. Khulula i-canopy bese uqinisekisa ukuthi ubakaki okhuphukayo uvikelekile ebhokisini lokuphuma kagesi. Ubakaki kufanele uflush ngaphandle kokunyakaza uyokulwa nebhokisi lokuphuma. Qinisekisa ukuthi ibhokisi lokuphuma livikelekile.
  4. Sebenzisa i-downrod ende (ethengiswa ngokwehlukana) noma uhambise ifeni kwenye indawo.
  5. Phakamisa ikhava yejoka bese uqinisa izikulufo ezibekiwe ejokeni lize livikeleke.

Umlandeli usebenza kahle kepha amalambu awasebenzi.

  1. Qinisekisa ukuthi izixhumi ezingu-9-pin zivikelekile ngendlela efanele.
  2. Cisha ugesi bese ubheka konke ukuxhumana ebhokisini lesitolo.

UKUPHILA KWEMPAHLA KWESIKHATHI

Okubekwe ngezansi, umkhiqizi, ugunyaza injini yefeni ukuthi le fan yosilingi ingabi nasici ekusebenzeni nasekusebenzeni kwayo yonke impilo yomkhiqizo. Futhi, kuncike emikhawulweni engezansi, iqinisekisa ukuthi zonke izingxenye zefeni yesilingi (“izingxenye zefeni likasilingi” azibandakanyi injini nezingxenye ezenziwe ngengilazi ngokuphelele noma ingxenye) ukuthi zingabi nasici ekwenziweni nasekusebenzeni isikhathi esingangonyaka ngemva idethi yokuthengwa komthengi wokuqala endaweni yokudayisa.
Zonke izimangalo kufanele zenziwe ngumthengi wokuqala, noma ngabe lowo mthengi uthenge umkhiqizo esitolo noma kosonkontileka. Ukukhubazeka kwengxenye yomlandeli kufanele kubikwe kungakapheli unyaka wokuqala kusukela ngosuku lokuthenga. Izingxenye ezenziwe ngokuphelele noma ingxenye ngengilazi nokuqedwa kwensimbi nezinye izinto akuvumelekile.

Abathengi banesibopho sazo zonke izindleko zokususa nokufaka kabusha umkhiqizo. Noma imuphi umonakalo kunoma iyiphi ingxenye edalwe ukuguga okuvamile, ingozi, ukusetshenziswa kabi, noma ukufakwa okungafanele, akumbozwa yilesi siqinisekiso. ayithathi mthwalo walutho wokufakwa kwabalandeli. Noma iyiphi isevisi eyenziwa umuntu osebenza ngogesi ongenalayisense izoyenza isiqinisekiso singavumelekile. Isibopho esisodwa kuzoba ukulungisa noma ukushintsha injini, izingxenye, noma umkhiqizo ngaphakathi kwemigomo eshiwo ngenhla. ngeke abe nesibopho sanoma ikuphi ukulahlekelwa noma ukulimala kwanoma yiluphi uhlobo, okuhlanganisa noma imuphi umonakalo wengozi noma umphumela obangelwa ngokuqondile noma ngokungaqondile, kunoma yikuphi ukwephulwa kwewaranti, okushiwo noma okushiwo, nanoma yikuphi ukwehluleka kwalo mkhiqizo. Ezinye izifundazwe azikuvumeli ukukhishwa noma ukukhawulwa komonakalo wengozi noma wemiphumela ngakho-ke lo mkhawulo ungase ungakusebenzeli.

Uma umthengi wokuqala eyeka ukuba nomlandeli, le waranti ayisebenzi.
Uma umthengi ehlangabezana nenkinga nefeni yakho ehlobene nokukhubazeka emsebenzini noma izinto zokwakha phakathi nesikhathi sewaranti ehlobene nengxenye eyonakele, uvuma ukushintsha ingxenye eyonakele ngaphandle kwenkokhiso, noma ngokuzikhethela kwayo, ukuze esikhundleni sefenisha yosilingi afake enye efanayo noma ephezulu. imodeli. amawaranti akhawulelwe kumawaranti abhaliwe abekwe kulesi siqinisekiso sokuphila esilinganiselwe sefeni yesilingi. Zonke ezinye iziqinisekiso ezicacile nezicatshangelwe, okuhlanganisa, ngaphandle komkhawulo, iwaranti eshiwo yokufaneleka ngenjongo ethile kanye newaranti eshiwo yokuthengiselana ayifuni. Ezinye izifundazwe aziwuvumeli umshwana wokuzikhipha emthwalweni weziqinisekiso ezishiwo, ngakho-ke lo mshwana wokuzihlangula ungase ungasebenzi kuwe.

UHLU LWEZINGXENYE ZOKUSHINTSHA

Ukuze uthole izingxenye ezishintshayo, shayela umnyango wethu wesevisi yamakhasimende (1-877-361 3883). NgoMsombuluko-Lwesine 8am - 6pm, ngoLwesihlanu 8am - 5pm, Isikhathi Esijwayelekile SaseMpumalanga.

  • UKUVULA IMIYALELO
  • IZINGXENYE ZOKUSHINTSHA
  • IZINGXENYE ZOKUSHINTSHA
  • IZINGXENYE ZOKUSHINTSHA
  • IZINGXENYE ZOKUSHINTSHA
  • IZINGXENYE ZOKUSHINTSHA
    IZINGXENYE ZOKUSHINTSHA
  • IZINGXENYE ZOKUSHINTSHA
  • IZINGXENYE ZOKUSHINTSHA
  • IZINGXENYE ZOKUSHINTSHA

A: I-Mounting Bracket
B: I-Canopy
C: Ikhava yeCanopy
D: Downrod
E: Ikhava Lejoka
F: Ikhithi ekhanyayo
G: Ingilazi Ingilazi
H: I-Blade Arm (x 5)
I: I-Blade (x 5)
HW: Isikhwama se-Hardware

 

Amadokhumenti / Izinsiza

ome Glencrest Ceiling Fan [pdf] Umhlahlandlela Womsebenzisi
ome, Glencrest, Ceiling Fan

Shiya amazwana

Ikheli lakho le ngeke ishicilelwe.