Ilogo ye-iPROIbhokisi le-adaptha
Ukufundiswa Manual
Ibhokisi le-adaptha ye-iPRO WVQJB500 WModel No.
I-WV-QJB500-W
I-WV-QJB500-S
I-WV-QJB500-G

Ukuqapha

  • Ungayisebenzisi le bracket ngaphandle kwamakhamera afanele.
    Ukwehluleka ukugcina lokhu kungadala ukwehla okuholela ekulimaleni noma ezingozini.
  • Bheka umsebenzi wokufaka kumthengisi.
    Umsebenzi wokufaka udinga amasu nolwazi. Ukwehluleka ukuqaphela lokhu kungase kubangele umlilo, ukushaqeka kukagesi, ukulimala, noma ukulimala komkhiqizo.
    Qiniseka ukuthi uthintana nomthengisi.
  • Faka umkhiqizo ngokuphephile odongeni noma ophahleni ngokuhambisana nemiyalelo yokufaka.
    Ukwehluleka ukugcina lokhu kungadala ukulimala noma izingozi.
  • Ungahlikihli emaphethelweni ezingxenye zensimbi ngesandla sakho.
    Ukwehluleka ukugcina lokhu kungadala ukulimala.

Uma usebenzisa lo mkhiqizo, funda futhi "Izinyathelo Zokuqapha" ezichazwe emiyalweni yokusebenza yekhamera ezonamathiselwa. 

Isandulela
Sebenzisa lo mkhiqizo lapho wenza izintambo zangaphandle zekhamera yohlobo lwebhokisi ngaphandle noma ubakaki wokukhweza odongeni njengokusebenzisa ipayipi.
Ukuze uthole ulwazi lwakamuva mayelana namakhamera asekelwayo, bheka ukwesekwa kwethu webisayithi
(https://i-pro.com/global/en/surveillance/training_support/support/technical_information<ControlNo.:C0501,C0502>).

Imininingwane

Izinga lokushisa elisebenza: -50 °C ukuya +60 °C (-58 °F ukuya +140 °F)
Ubukhulu: 115 mm (W) x 115 mm (H) x 40 mm (D)
(4-17/32 amayintshi (W) x 4-17/32 amayintshi (H) x 1-11/16 amayintshi (D))
Imisa: Cishe. 430 g (0.95 Ibs)
Qeda: Ubakaki oyisisekelo: I-Aluminium die cast
Ipuleti lokunamathisela: I-Stainless
I-WV-QJB500-W: i-PRO emhlophe
I-WV-QJB500-S: Isiliva
I-VW-QJB500-G: Okumpunga okukhanyayo

* Lo mkhiqizo uqukethe ipuleti lokunamathiselwe kanye nobakaki oyisisekelo futhi ahlanganiswe ngokuhlukana.

Izinyathelo zokuphepha zokufaka

  • Ukuze ugweme ukulimala, umkhiqizo kufanele ugxunyekwe ngokuvikelekile ophahleni noma odongeni ngokuya ngomhlahlandlela Wokufaka walobakaki.
  • Qiniseka ukuthi uyawususa lo mkhiqizo uma ungasasetshenziswa.

Izesekeli ezijwayelekile

Iziyalezo Zokusebenza (le dokhumenti) …….. 1 pc.
Kufakwe i-auxiliary wire* …………………………….. 1 pc.
Isikulufu seHexagon ………………………………………. 5 ama-pcs.
(M4 × 14 mm {9/16 amayintshi}) (kuzo, 1 okwesipele)
Ukulungisa izikulufu zepuleti lokunamathiselwe ………… 5 pcs.
(M4 × 10 mm {13/32 amayintshi}) (kuzo, 1 okwesipele)
Isikulufu sokulungiswa kwesikhashana ……………………… 2 ama-pcs.
(M3 × 3.5 mm {1/8 amayintshi}) (kuzo, 1 okwesipele)

* Intambo yokusiza efakiwe ifakwe ipuleti lokunamathiselwe. 

Ezinye izinto ezidingekayo (azifakiwe)
Ukulungisa izikulufu (M4) ……………………. 4 ama-pcs.
OKUBALULEKILE

Ukulungiswa

Khipha i-tape fixing efakiwe yocingo olusizayo (isisetshenziswa) kupuleti lokunamathiselwe.
Uma ufaka omunye ubakaki kulo mkhiqizo
Okulandelayo yizincazelo zendlela yokufaka i-WV-QWL500-W (Ubakaki Wase-Wall Mount) kulo mkhiqizo njenge-ex.ample.

  1. Khipha intambo eyisisizi efakiwe (insiza) kupuleti lokunamathiselwe. I-iPRO WVQJB500 W I-Adapter Box - FIG 1
  2. Namathisela isikulufu sokulungiswa kwesikhashana (isisetshenziswa) kubakaki ukuze sifakwe kulo mkhiqizo.I-iPRO WVQJB500 W I-Adapter Box - FIG 2 I-torque yokuqinisa enconyiwe: 0.78 N·m {0.58 lbf·ft}
  3. Uma kunesidingo, faka ipuleti lokunamathisela elinikezwe nekhamera ku-WV-QWL500-W ngokulandela imiyalelo echazwe ku-Operating Instructions of WV-QWL500-W.

Uma usebenzisa i-conduit

  • Susa isivalo sowesifazane noma intambo yomsele usebenzisa isikrufu se-hex esingu-5 mm bese unamathisela ipayipi.
    Intambo yesifazane yepayipi ihambisana ne-ANSI NPSM (imicu yepayipi ehambisanayo) 3/4 noma i-ISO 228-1 (imicu yepayipi ehambisanayo) G3/4.

I-iPRO WVQJB500 W I-Adapter Box - FIG 3

Ukufakwa

Isinyathelo 1: Cubungula indawo yokufaka.
(Izikulufa (izindawo ezi-4)/ Imbobo yekhebula (indawo engu-1))
Uma ufaka lo mkhiqizo ngokuqondile, cubungula indawo yokufaka.
Qaphela:

  • Nquma ububanzi bembobo yesikulufu sokulungisa nokujula ngokuhambisana nezicaciso zezikulufu noma amahange (x4) (M4: okuthengwa endaweni).
  • Uma ufaka izintambo usebenzisa i-conduit, akudingekile ukucubungula imbobo yokufinyelela ikhebula endaweni yokufaka. Yenza imbobo yesikulufu sokulungisa ukuze imbobo yokufinyelela ikhebula (ye-conduit) yebakaki yesisekelo ihlelwe ngendlela ye-conduit.

Kuye ngesimo sophahla noma indawo yodonga, amaphethini amahlanu alandelayo wezikhundla zezikulufu ayatholakala ukuze kulungiswe ubakaki oyisisekelo. Sebenzisa kuphela izimbobo zephethini efanayo (A - E) ukuze ukhweze.

I-iPRO WVQJB500 W I-Adapter Box - FIG 4

Vertical Evundlile
A 83.5 mm {3-9/32 amayintshi} (82.5 mm {3-1/4 amayintshi}) 46 mm {1-13/16 amayintshi} (47.6 mm {1-7/8 amayintshi})
B 46 mm {1-13/16 amayintshi} (47.6 mm {1-7/8 amayintshi}) 83.5 mm {3-9/32 amayintshi} (82.5 mm {3-1/4 amayintshi})
C* 83.5 mm {3-9/32 amayintshi} (83.3 mm {3-9/32 amayintshi}) -
D* - 83.5 mm {3-9/32 amayintshi} (83.3 mm {3-9/32 amayintshi})
E 63 mm (2-15/32 amayintshi} 63 mm (2-15/32 amayintshi}

* Uma ukhweza ebhokisini lokuhlangana leqembu elilodwa, lungisa ngezikulufu ezimbili zokulungisa (M4: ezitholwe endaweni) usebenzisa izimbobo zanoma iyiphi iphethini C noma D.

Isinyathelo 2: Lungisa ubakaki oyisisekelo endaweni yokufaka noma ebhokisini lokuhlangana.
Dlulisa izintambo kubakaki besisekelo bese ulungisa isisekelo sobakaki endaweni yokufaka noma ebhokisini lokuhlangana (elithengwe endaweni) elinezikulufu zokulungisa (M4: ezitholwe endaweni).
Lapho ufaka ubakaki oyisisekelo endaweni yokufaka
Qaphela:

  • Uma ufaka lo mkhiqizo ngaphandle, qiniseka ukuthi usebenzisa ukuvimbela amanzi embotsheni yokufinyelela yekhebula kanye nezimbobo zokulungisa isikulufu.

I-iPRO WVQJB500 W I-Adapter Box - FIG 5Umfanekiso oboniswe kwesokunxele uyi-example uma ufaka odongeni kusetshenziswa inhlanganisela yezimbobo zezikulufo zokulungisa ezingama-83.5mm {3-9/32inches} × 46mm {1-13/16inches}.

■ Uma ukhweza ubakaki oyisisekelo ebhokisini lokuhlangana
Khetha izimbobo kubakaki besisekelo ukuze zifane nezimbobo zezikulufu zebhokisi lokuhlangana.
Qaphela:

  • Lapho usebenzisa ibhokisi lokuhlangana lamaqembu amabili, kutuswa ukuba amabhokisi ahlelwe ngokulandelana njengoba kuboniswe emfanekisweni ongezansi. (Umsebenzi wokuxhuma ikhebula ohlangothini lwebhokisi elingenalutho uzoba lula.)

I-iPRO WVQJB500 W I-Adapter Box - FIG 6

Isinyathelo sesi-3: Lungisa ipuleti lokunamathiselwe.
Lungisa ipuleti lokunamathiselwe elinezikulufu ezine zokulungisa zepuleti lokunamathiselwe (M4: insiza).
I-torque yokuqinisa enconyiwe: 1.37 N·m {1.01 lbf ft}

I-iPRO WVQJB500 W I-Adapter Box - FIG 7

Qaphela:

  • Lapho ufaka izintambo usebenzisa ipayipi, qedela umsebenzi wokuxhuma ohlangothini lwesisekelo sobakaki ngaphambi kokulungisa ipuleti lokunamathiselwe.
  • Lapho ufaka lo mkhiqizo odongeni, lungisa ipuleti lokunamathiselwe elinophawu oluthi “TOP⇧” olubheke phezulu.
  • Lapho ufaka lo mkhiqizo kusilingi, lungisa ipuleti lokunamathiselwe ukuze uphawu lwe-“TOP⇧” lubheke lapho ikhamera iqonde khona.

Isinyathelo 4: Faka ikhamera noma omunye ubakaki kulo mkhiqizo.
■ Uma ufaka ikhamera
Okulandelayo izincazelo zendlela yokufaka i-WV-U1542L (uhlobo lwebhokisi langaphandle) odongeni usebenzisa lo mkhiqizo njenge-ex.ample. Inqubo yokufaka iyafana kwamanye amakhamera.

  1. Lengisa ikhamera ngokuhuka intambo engumsizi efakiwe kulo mkhiqizo kuhhuku engemuva kwesisekelo sokukhweza ikhamera njengoba kuboniswe emfanekisweni ongakwesokudla.
  2. Xhuma izintambo ngokulandela iziqondiso ezikumhlahlandlela wokufaka wekhamera.
  3. Lungisa okwesikhashana isisekelo sokukhweza ikhamera ngokuhuka isikulufu ukuze silungiswe okwesikhashana kulo mkhiqizo.I-iPRO WVQJB500 W I-Adapter Box - FIG 8I-iPRO WVQJB500 W I-Adapter Box - FIG 9
  4. Lungisa ikhamera kulo mkhiqizo ngezikulufo ezine ze-hexagon (M4: insiza) usebenzisa i-wrench engu-3 mm hex (ethengiwe endaweni).
    I-torque yokuqinisa enconyiwe: 1.37 N·m {1.01 lbf ft}
    I-iPRO WVQJB500 W I-Adapter Box - FIG 10

■ Uma ukhweza omunye ubakaki
Okulandelayo yizincazelo zendlela yokufaka i-WV-QWL500-W (Ubakaki Wase-Wall Mount) kulo mkhiqizo njenge-ex.ample.

  1. Dlula ikhebuli ku-WV-QWL500-W bese uyilungisa okwesikhashana ngokuhuka isikulufu ukuze silungiswe okwesikhashana kulo mkhiqizo.I-iPRO WVQJB500 W I-Adapter Box - FIG 11
  2. Lungisa i-WV-QWL500-W kulo mkhiqizo ngezikulufo ezine ze-hexagon (M4: insiza) usebenzisa i-wrench engu-3 mm hex (ethengiwe endaweni).
    I-torque yokuqinisa enconyiwe: 1.37 N·m {1.01 lbf ft}I-iPRO WVQJB500 W I-Adapter Box - FIG 12
  3. Faka ikhamera ngokulandela Imiyalo Yokusebenza ye-WV-QWL500-W.
  • Ngaphambi kokuzama ukuxhuma noma ukufaka lo mkhiqizo, sicela ufunde le miyalo ngokucophelela bese ugcina le manuwali ukuze uyisebenzise esikhathini esizayo.
  • Ukubukeka kwangaphandle nezinye izingxenye eziboniswe kuleli bhukwana zingahluka kumkhiqizo uqobo ngaphakathi kwesilinganiso ongeke uphazamise ukusetshenziswa okujwayelekile ngenxa yokuthuthuka komkhiqizo.

I-i-PRO Co., Ltd. ayithwesi icala ngokulimala noma ukumosheka kwempahla okubangelwa ukwehluleka okubangelwa ukufakwa okungafanele noma ukusebenza okungqubuzana nalawa madokhumenti.

Qaphela: Phawula:
• Ngaphambi kokuzama ukuxhuma noma ukusebenzisa lo mkhiqizo, sicela ufunde le miyalo ngokucophelela. • Lo mkhiqizo awufanele ukusetshenziswa ezindaweni lapho kungenzeka kube khona izingane.
• Ungawufaki lo mkhiqizo ezindaweni lapho abantu abajwayelekile bengakwazi khona kalula
finyelela kuyo.
• Ukuze uthole ulwazi mayelana nezikulufu nabakaki abadingekayo ukuze kufakwe, bheka ingxenye ehambisanayo yalo mbhalo.

Okwe-US naseCanada:
I-PRO Americas Inc.
OkweYurophu nakwamanye amazwe:
i-PRO EMEA BV
https://www.i-pro.com/
© i-PRO Co., Ltd. 2022
Ibhokisi le-adaptha ye-iPRO WVQJB500 W - Ikhodi YEBHAI-Ns0520-1042
Ishicilelwe eChina

Amadokhumenti / Izinsiza

I-PRO WV-QJB500-W Ibhokisi le-adaptha [pdf] Incwadi Yeziqondiso
I-WV-QJB500-W, Ibhokisi le-Adapter, Ibhokisi le-adaptha le-WV-QJB500-W, Ibhokisi

Okubhekwayo

Shiya amazwana

Ikheli lakho le ngeke ishicilelwe. Ezidingekayo ibhalwe *