Umsunguli ohamba phambili kwezixazululo zokuhlanza ikhaya ezihlakaniphile, ogxile kuma-vacuum cleaner amarobhothi, amarobhothi okuwasha phansi, kanye nama-wet/dry cleaner angenazintambo.
IMPILO is a global technology company focused on the development, manufacturing, and marketing of intelligent cleaning robots. Dedicated to the principle of "Clean Living," ILIFE offers a diverse portfolio of automated home maintenance products designed to make cleaning easier and more efficient for millions of families worldwide.
The brand's lineup includes the popular A-Series robot vacuums for carpet and hard floors, the V-Series for 2-in-1 vacuuming and mopping, and the Shinebot W-Series for specialized floor washing. Beyond robotics, ILIFE has expanded into cordless wet and dry vacuum cleaners, utilizing advanced technologies like LiDAR navigation, cellular dustbins, and self-cleaning systems to ensure thorough results.
Izincwadi zakamuva ezivela manuals+ ikhethelwe lolu hlobo.
Buka amavidiyo wokusetha, ukufakwa, nokuxazulula izinkinga zalo mkhiqizo.
Imibuzo evamile mayelana namamanyuwali, ukubhaliswa, nokusekelwa kwalolu mkhiqizo.
Most ILIFE robots can be reset by pressing and holding the Auto/Start button on the device for 10–15 seconds until the lights turn off or an audible alert sounds, then restarting the device.
A flashing red light typically indicates an error/fault, such as a stuck wheel, brush entanglement, or cliff sensor issue. Check the manual for the specific error code (beep count) to diagnose the problem.
Dark carpets or reflective surfaces may confuse the anti-drop sensors (cliff sensors), causing the robot to stop or move erratically. It is generally recommended to use magnetic strips or virtual walls for such areas if supported.
It is recommended to clean the dustbin and filters after every use or at least once a week. The High-Performance (HEPA) filter should be replaced every 3–6 months depending on usage.
Ensure your Wi-Fi network is 2.4GHz (5GHz is not supported by most models). Reset the robot's Wi-Fi by holding the specific button combo (often the 'Start' button) until the Wi-Fi icon flashes, then retry pairing via the ILIFE Clean App.