JEYI I9-Seal

JEYI I9-Seal M.2 NVMe SSD Enclosure User Manual

Model: I9-Seal

Isingeniso

This manual provides comprehensive instructions for the installation, operation, and maintenance of your JEYI I9-Seal M.2 NVMe SSD Enclosure. This device converts an NVMe M.2 solid-state drive into a portable external storage solution with high-speed USB 3.2 Gen 2 connectivity.

Okuqukethwe Kwephakheji

Sicela uqinisekise ukuthi zonke izinto ezibalwe ngezansi zifakiwe kuphakheji yakho:

JEYI M.2 NVMe SSD Enclosure
Amaphedi ashisayo
Isikulufi
USB-A to USB-C Cable (10Gbps)
USB-C to USB-C Cable (10Gbps)
Lanyard

JEYI I9-Seal M.2 NVMe SSD Enclosure package contents — Image: Contents of the JEYI I9-Seal M.2 NVMe SSD Enclosure package, showing the enclosure, two cables, thermal pads, a screwdriver, and a lanyard.

Setha Imiyalelo

Follow these steps to install your NVMe M.2 SSD into the JEYI I9-Seal enclosure:

Lungiselela I-Enclosure: Gently slide open the enclosure to reveal the internal PCB.
Apply Thermal Pad: Peel off the protective films from both sides of a thermal pad and carefully place it onto the NVMe SSD chip area. This aids in heat dissipation.
Insert NVMe SSD: Align your NVMe M.2 SSD (2280 form factor only) with the M-Key slot on the PCB. Insert the SSD firmly but gently into the slot at an angle.
Vikela i-SSD: Once inserted, gently push down the SSD and secure it with the provided screw using the included screwdriver. Ensure the SSD is flat and securely fastened.
Close the Enclosure: Carefully slide the enclosure cover back into place until it clicks securely.

Kuqhume view of JEYI I9-Seal M.2 NVMe SSD Enclosure showing internal components and thermal pad placement — Image: An exploded diagram illustrating the internal structure of the enclosure, including the aluminum alloy case, heat dissipation shell, thermal pad, and screw, demonstrating how to assemble the SSD within the enclosure.

Diagram showing compatibility with M.2 2280 NVMe SSDs only — Image: A visual guide indicating that the enclosure is compatible exclusively with M.2 2280 NVMe SSDs, with other sizes (2230, 2242, 2260) marked as incompatible.

Imiyalelo yokusebenza

Once your NVMe SSD is securely installed, connect the enclosure to your device:

Xhuma kudivayisi: Use either the provided USB-C to USB-C cable or the USB-A to USB-C cable to connect the enclosure to a compatible USB port on your computer, smartphone, tablet, or game console.
Inkomba Yamandla: A small LED indicator on the enclosure will illuminate, signifying that the device is powered on and connected.
Ukuqashelwa Kwediski: Your operating system (Windows, macOS, Linux, Android, iOS) should automatically detect the new storage device. If it's a new SSD, you may need to initialize and format it through Disk Management (Windows) or Disk Utility (macOS) before use.
Ukudluliswa Kwedatha: You can now perform data backup, file transfers, disk upgrades, data recovery, or use it for storage expansion. The enclosure supports USB 3.2 Gen 2 speeds up to 10Gbps.

JEYI I9-Seal M.2 NVMe SSD Enclosure connected to various devices like laptop, smartphone, and tablet — Image: The JEYI I9-Seal enclosure connected to a laptop, smartphone, and tablet, demonstrating its wide compatibility with Windows, Linux, and Mac OS 8.0 and above systems, including Thunderbolt compatibility.

Comparison of USB data transfer speeds, highlighting 10Gbps for USB 3.2 Gen 2 — Image: A graphic illustrating data transfer speeds, showing USB 2.0 at 480Mbps, USB 3.0 (USB 3.2 Gen 1) at 5Gbps, and USB 3.1 (USB 3.2 Gen 2) at 10Gbps, emphasizing the enclosure's high-speed capability for NVMe drives.

Isondlo

To ensure optimal performance and longevity of your JEYI I9-Seal enclosure:

Ukuphatha Ukushisa: I-aluminium casing and thermal pads are designed for efficient heat dissipation. During prolonged high-speed data transfers, the enclosure may become warm to the touch. This is normal and indicates effective heat transfer from the SSD.
Ukuhlanza: Sebenzisa indwangu ethambile neyomile ukuhlanza ingaphandle lendawo ebiyelwe. Gwema ukusebenzisa izihlanzi noma izinyibilikisi eziwuketshezi.
Isitoreji: Uma ingasetshenziswa, gcina indawo ebiyelwe endaweni epholile, eyomile ekude nelanga eliqondile namazinga okushisa aphezulu.
Ukunakekelwa Kwekhebula: Handle the USB cables carefully. Avoid sharp bends or excessive pulling to prevent damage.

Ukuxazulula inkinga

Inkinga	Imbangela Engenzeka	Isixazululo
Enclosure not detected by computer.	Ukuxhumeka kwekhebula okuxekethile. SSD not properly installed. SSD not initialized/formatted. Faulty USB port or cable.	Qinisekisa ukuthi izintambo zixhumeke ngokuphephile. Re-open enclosure and verify SSD is seated correctly and screwed in. Check Disk Management (Windows) or Disk Utility (macOS) to initialize and format the SSD. Zama imbobo ye-USB ehlukile noma ikhebuli.
Izivinini zokudlulisa idatha ezihamba kancane.	Connected to a slower USB port (e.g., USB 2.0). Thermal throttling due to high temperature. SSD performance limitations.	Connect to a USB 3.2 Gen 2 (10Gbps) compatible port. Ensure thermal pads are correctly installed. Allow the enclosure to cool if it becomes excessively hot. Verify your NVMe SSD's rated speed.
Enclosure gets very hot.	Normal operation during heavy data transfer. Ineffective thermal pad contact.	This is expected as the aluminum casing dissipates heat. Ensure thermal pads are correctly positioned and making good contact with the SSD and enclosure.

Imininingwane

Isici	Imininingwane
Imodeli	I9-Seal
Ibhrendi	JEYI
Isikhombimsebenzisi se-Hardware	USB 3.2 Gen 2 (USB-C)
Isilinganiso Sokudluliswa Kwedatha	Kufika ku-10 Gbps
Compatible SSD Type	NVMe M.2 (PCI-E M-Key)
Supported SSD Form Factor	2280 (80mm) only
Umthamo Wesitoreji Omkhulu	4 TB
I-chipset	JMS583 A3
Izici	UASP Support, TRIM Support, Win to Go (WTG) Support
Okubalulekile	Ingxube ye-aluminium
Umbala	Isiliva
Ubukhulu bomkhiqizo	4.06 x 1.02 x 0.39 amayintshi (103 x 26 x 10 mm)
Isisindo sento	0.317 ama-ounces (9 amagremu)
Amasistimu Okusebenza Ahambisanayo	Windows, macOS, Linux, iOS, Android

Diagram of the JMS583 A3 master chip — Image: A detailed illustration of the JMS583 A3 master chip, which is integrated into the enclosure for stable and high-speed data transmission up to 10Gbps.

Iwaranti kanye Nokusekela

For warranty information or technical support, please refer to the official JEYI website or contact their customer service directly. Details regarding specific warranty periods and support channels are typically provided with your purchase documentation or on the manufacturer's webindawo.

Umkhiqizi: JEYI

Webindawo: Visit the JEYI Store on Amazon

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.