ZOOM BTA-2 Bluetooth Adapter for PodTrak Series User Guide

Connecting a BTA-2 (dedicated wireless adapter)

By connecting a BTA-2, audio can be input through the smartphone connection jack via Bluetooth. LED Pairing switch.

Connecting

Pairing must be conducted the first time connecting.

1. While the P4 power is off, connect the BTA-2 to the smartphone connection jack and the BTA-2 power supply connector.
   
2. Turn the P4 power on ( “Turning the power on” on page 16).
   The LED lights white when power is being supplied to the BTA-2. If a smartphone has already been paired, it will automatically be connected at this time.
3. Press and hold the pairing switch until the BTA-2 LED blinks white.
   This puts the BTA-2 into connection standby.
4. Conduct connection procedures on the smartphone.
   The LED will light blue when connection completes.

NOTE When connecting to a smartphone using a BTA-2, set INPUT SELECT switch 3 to .

Disconnecting

1. Conduct disconnection procedures on the smartphone.
   This disconnects it.
2. The P4 power should be off when disconnecting a BTA-2.

Documents / Resources

ZOOM BTA-2 Bluetooth Adapter for PodTrak Series [pdf] User Guide BTA-2, Bluetooth Adapter for PodTrak Series, BTA-2 Bluetooth Adapter

References

• User Manual