■ Z-1000                  ■ C type cable                 ■ User Guide

Name of each part

Wheel & button (Operation / On&off button)

Indicate LED

Znie Main body

Charging terminal

Bluetooth connect button

Before using

  1. Please read carefully and keep this guide for reference later on.
  2. Please download 7nie* application in Google play store & Appstore
  3. You can refer to our website( or FAQ in application for warranty / detail
  4. Please connect the power cable when using SLEEP CARE mode or using the product for a long time

How to run



Wheel & Button PUSH (3sec)

Turn On/OFF

Turn Wheel & Button(left/right)

OFF LED Color change

Wheel & Button PUSH

LED Brightness

Wheel & Button

Sleep Mode On/OFF

*Sleep mode operated by operating the main body is not provided with morning care mode.

How to connect with bluetooth

  1. Power on the Znie and turn on Bluetooth on your mobile device.
  2. When you run the Znie App, it automatically connects (pairs).

Tip) If not automatically connected (pairing), press and hold the Bluetooth button on the back of the body to enter pairing mode. When entering pairing mode, the BLUE LED will rotate on the status LED on the Znie. Select ‘Znie_Z1000* on the Bluetooth setup screen of the mobile device to connect.

When the connection is complete, the BLUE LED will stop rotating.

  • Pairing between Znie and mobile devices only needs to be done once.
  • When Znie and the App are disconnected, the BLUE LED flashes on the status LED and turns off power after one minute.

Using Znie with Application

  1. Complete connect Znie & Smartphone
  2. You can use all modes you want in Znie application.

Znie App

A) Main page of Znie application (After connecting)

B) Sleep mode: Set wake up time, and the sleep care will be started with start button.

C) Color Therapy 1: You can access to LED Color Therapy.

D) Color Therapy 2: Znie will recommend suitable LED color therapy for each                situations.

E) Healing Mode: It help you to get calm and meditation.

F) Desk Mode: It help you to get more concentration.

G) Setting: You can access to setting mode cogwheel icon of each page.

There are user setting and FAQ.

How to charging

Connect USB C type charging cable. You can use adaptor, portable battery, Laptop or PC. We recommend abaptor.

Indicate Battery state




LED “Pure Green”

Below 5%

LED “Red” Blink


LED “Red”

* After fully charging the product, it can be used for 5 hours with maximum

brightness of LED lighting. But, It depend on Color, Brightness and service environment.

When using Sleep Mode, it is recommended that you connect the product

to the power source.


Please comply with below to safety use.

  • Please charge the product by using the charging cable and power adapter before using the product. Charge only with adapters certified by international safety standards such as KC and CE. Damage caused by use of unauthorized adapters is not guaranteed by the manufacturer. While charging, the charging adapter should be close to the wall outlet, and it should be placed within easy reach.
  • Users must not modify or remove the parts at their discretion. The battery may be damaged and it may cause overheating and injury.
  • Applying excessive heat or shock to the product may cause a malfunction and breakdown of the product
  • Children, infants or pets must not be allowed to suck and bite the product. They must not be accessed to the product.
  • The operating temperature range of the product is 0-85°C and proper storage temperature is -10°C-50°C. Using the product out of the above temperature can cause


Product Name

Zine Material PC,ABS


Z-1000 Verification


Rated Input Voltage

DC 5.0V, 1.5A Country of

Made in Korea

Battery capacity

2,600mAh Manufacturer

Honey IT Inc


97 X 97 X 152(mm) A/S


Weight 370(g) Website

FCC Information to User

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.



IMPORTANT NOTE : FCC RF Radiation Exposure Statement

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.

This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.





Documents / Resources

Zine Z-1000 Sleep Care Lamp [pdf] User Guide
Z-1000, Z1000, 2AY5A-Z-1000, 2AY5AZ1000, Z-1000 Sleep Care Lamp, Sleep Care Lamp

Leave a comment

Your email address will not be published.