Momcozy KleanPal Pro Baby Bottle Washer User Manual

一、簡介

The Momcozy KleanPal Pro is an advanced 3-in-1 automatic baby bottle washer designed to simplify the cleaning, sterilization, and drying process for baby bottles and accessories. This manual provides detailed instructions for safe and efficient operation, maintenance, and troubleshooting.

Image 1.1: The Momcozy KleanPal Pro Baby Bottle Washer, a compact and efficient device for bottle care.

2. 安全訊息

Please read all safety warnings and instructions carefully before using the appliance to avoid injury or damage.

• 務必確保將電器放置在穩定、平坦的表面上。
• 請勿將主機浸入水或其他液體中。
• 請將本品放在兒童接觸不到的地方。
• Use only Momcozy approved cleaning tablets.
• 清潔前或不使用時拔下產品插頭。
• 如果電源線或插頭損壞，請勿操作。
• Steam is hot; avoid direct contact during operation.

3. 產品結束view

3.1 組件

• 帶控制面板的主機
• 透明蓋子
• Double Removable Basket (Upper and Lower)
• 水庫
• 排水管
• Cleaning Tablets (60 included)

3.2 控制面板

The control panel features a digital display and various buttons for program selection and operation.

圖 3.1：結束view of the control panel and available cleaning settings, including Rapid Wash, Deep Wash, Sterilization and Drying, and Sterile Storage.

• 電源按鈕： 打開/關閉本機。
• 程式選擇按鈕： Rapid, Normal, Steam, Storage.
• 開始/暫停按鈕： 啟動或暫停選定的程序。
• 數字顯示： Shows remaining time and status indicators (e.g., "NO WATER", "DRYING", "STEAM", "FRESH AIR").

4. 設定

首次使用前，請依照以下步驟進行初始設定：

1. 開箱： 小心地從包裝中取出所有組件。
2. 放置： Place the Momcozy KleanPal Pro on a flat, stable surface near a power outlet and a sink for drainage.
3. 連接排水軟管： Attach the drain hose to the designated port on the unit and direct the other end into a sink or drain.
   

   Image 4.1: Visual guide for the setup process, including plugging in, connecting the drain hose, filling the water reservoir, adding a cleaning tablet, and selecting a program.

4. 加滿水箱： Fill the external water reservoir with distilled or purified water up to the MAX line. Avoid using tap water to prevent mineral buildup.
5. 插入： Connect the power cord to a compatible 220-240V/50-60Hz power outlet.

5. 操作說明

5.1 Preparing Items for Cleaning

• Rinse bottles and accessories to remove large food particles.
• Place bottles upside down in the lower basket. Nipples, rings, and other small accessories can be placed in the upper basket. The double removable basket can accommodate up to 4 bottles and various accessories.
• The unit is compatible with most wide-neck and narrow-neck bottles, as well as sippy cups, silicone tableware, teething rings, pacifiers, and breast pump parts.
  

  Image 5.1: The KleanPal Pro can wash a variety of baby items, including wide-neck bottles, narrow-neck bottles, sippy cups, tableware, and pump parts.
• Add one Momcozy cleaning tablet to the designated compartment in the unit.
  

  Image 5.2: Place one Momcozy detergent tablet into the compartment for each wash cycle. Only use dedicated Momcozy detergent tablets.

• 關緊透明蓋。

5.2 Program Selection and Operation

The Momcozy KleanPal Pro offers 9 programs, including a 72-hour sterile storage mode. Select the appropriate program based on your needs:

圖 5.3：細部圖view of the available programs: Wash Only, Wash + Sterilization + Drying, Wash + Sterilization + Drying + Storage, and Storage Only.

• 只洗：
  • Rapid Wash (19 min): For recently used bottles with light milk residue.
  • Normal Wash (29 min): For bottles with significant dried milk residue.
  

  Image 5.4: Comparison of Rapid Wash for light residue and Normal Wash for dried milk residue.
• Wash + Sterilization + Drying:
  • Rapid + Steam (74 min): Wash, sterilize, and dry.
  • Normal + Steam (84 min): Wash, sterilize, and dry.
  • Steam Only (55 min): Sterilize and dry only.

  The sterilization process uses 100°C hot steam to eliminate 99.9% of germs.

  

  Image 5.5: The unit effectively kills 99.9% of germs using natural steam, followed by automatic drying.
• Wash + Sterilization + Drying + Storage:
  • Rapid + Steam + Storage (74 min + storage time): Wash, sterilize, dry, and store.
  • Normal + Steam + Storage (84 min + storage time): Wash, sterilize, dry, and store.
  • Steam + Storage (29 min + storage time): Sterilize, dry, and store.
• Storage Only:
  • Storage Mode (72 hours): Keeps items sterile for up to 72 hours. This mode utilizes a H13 HEPA filter to remove 99.93% of airborne particles.
  

  Image 5.6: The unit provides up to 72 hours of sterile and odorless storage, removing 99.93% of airborne particles with its H13 HEPA filter.

After selecting your desired program, press the 開始/暫停 button to begin the cycle. The digital display will show the remaining time and current status.

Image 5.7: Clear status indicators on the screen and a transparent, visible lid allow you to monitor the cleaning progress.

6、維護保養

6.1 清潔設備

• After each use, ensure the drain hose is properly positioned to allow wastewater to drain automatically.
• 用清潔劑擦拭設備內部和外部。amp 布。
• Periodically clean the removable baskets.
• For thorough cleaning, run a "Steam Only" cycle with an empty unit to descale any mineral buildup.

6.2 HEPA 過濾器更換

The H13 HEPA filter should be replaced every 3-5 months, depending on usage, to maintain optimal air filtration during storage mode.

7。 故障排除

8. 規格

Image 8.1: The compact dimensions of the Momcozy KleanPal Pro, measuring approximately 41 cm in height, 25 cm in width, and 34 cm in depth.

9. 保固和支持

The Momcozy KleanPal Pro Baby Bottle Washer comes with a 1年保固 自購買日起，涵蓋正常使用情況下的製造缺陷和故障。

For technical support, warranty claims, or general inquiries, please contact Momcozy customer service through their official website or the contact information provided with your purchase. Please have your model number (BS03-EUU) and proof of purchase ready when contacting support.

For more information, visit the official Momcozy store: Momcozy商店