GL iNet FGB-01 開源遠端 KVM
讓我們開始吧
需要幫助嗎？掃描二維碼取得影片教學和使用者指南。
包裝內容
設定
- 取下塑料電池隔離片。
- Remove the cover from the notch on 1he side of the device.
- Take out the USB dongle. (FGB-01-D)
- Insert the USB dongle into the Comet {GL-RM1 ).
- The FingerBot can be controlled through the GLKVM app
安裝
- Clean the surface of the device before Installation.
- Peel off the protective sticker from 1he adhesive on the bottom of the FingerBolt.
- Stick the FingerBat near the control button of 1he device.
- Testing pressure levels
The FingerBot features two different pressing levels. You can adjust the level at any time through the GLKVM App.- Light Press Mode: Use for shorter keys.
- Hird Press Mada: Use for longer key.
- Operation made
- The FlngerBot features two different operation modes.. You can adjust the modes at any time through the GLKVM App.
- Press Mode: Pressing the button or controlling one-way switches. Ideal for tasks like powering on a PC.
- lnstallallan an the laplap
筆記： Only for laptops with edge-mounted power buttons.- Secure the bracket in the desired position and tighten it.
- Attach the FingerBot to the bracket and test its alignment.
- Tesl button
Use the test button to find your preferred pressing level:- First press – FingerBot extends to Light Press.
- Second press – FlngerBot extends to Hard Press.
- Third press – FingerBot retracts.
更換電池
How ta replaC41 your battery;
- 準備一塊CR2電池。
- Remove the cowr from 1he notch on the side of the device.
- 更換電池。
- Put the cover back on the device
支援
Set up video and FAQs
如需更詳細和更新的說明，請訪問我們的 web地點
- https://link.gl-inet.com/fgb-01-userguide-support
- 電子郵件：
- 不和諧：
- 紅迪網：
- 論壇：
保固單
- We provide a two-year limited warranty for the product and a 3-month limited warranty for accessories.
- An extra warranty may apply according to the local law in which the product purchase took place.
- Any damage to the caused by not following the instructions will render this warranty null and void.
- Any damage to the product caused by modifying the PCBA, components, or case will render this warranty null and void.
- 使用第三方固件引起的問題可能無法得到我們的官方支持。
- Any damage to the product caused by inappropriate use, e.g., inappropriate voltage input, high temperature, dropping in the water or on the ground, will render this warranty null and void.
- Pictures in the instructions are only for reference. We reserve the right to change or modify these materials without further notice.
香港辦公室
GL Technologies (Hong Kong) Limited 香港新界沙田香港科學園區601W大廈5室
深圳辦事處
深圳市廣聯智通科技有限公司中國深圳市寶安區石岩街道創維數碼大廈305-306室 518000 (+86-0755-86606126)
FCC 警告
為確保持續合規，任何未經該方明確批准的更改或修改。 對合規負責可能會使用戶操作此設備的權限失效。
美國聯邦通訊委員會聲明
本設備符合 FCC 規則第 15 部分的規定。操作須滿足以下兩個條件：
- 該設備可能不會造成有害幹擾，且
- 該設備必須接受任何收到的干擾，包括可能導致意外操作的干擾。
筆記： 本設備經過測試，符合 FCC 規則第 15 部分對 B 類數位設備的限制。這些限制旨在提供合理的保護，防止住宅安裝中的有害幹擾。該設備產生、使用並可能輻射射頻能量，如果不按照說明安裝和使用，可能會對無線電通訊造成有害幹擾。但是，不能保證在特定安裝中不會發生幹擾。如果該設備確實對無線電或電視接收造成有害幹擾（可以透過關閉和開啟設備來確定），我們鼓勵使用者嘗試透過以下一項或多項措施來糾正幹擾：
- 重新調整接收天線的方向或位置。
- 增加設備和接收器之間的距離。
- 將設備連接到與接收器所連接的電路不同的電路上的插座。
- 請諮詢經銷商或經驗豐富的廣播/電視技術人員尋求協助。
FCC 輻射暴露聲明
The equipment complies with the FCC Radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. EU Declaration of Conformity Hereby, GL Technologies (Hong Kong) Limited declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53 /EU and 2011/65/EU. A copy of the EU Declaration of Conformity (DoC) is available online at https://www.gl-inet.com/products/certificate.
警告
如果更換了錯誤類型的電池，則有發生火災或爆炸的危險。
- 更換類型不正確的電池可能會破壞安全措施（例如ample，對於某些鋰電池類型）。
- 將電池放入火中或熱烘箱中，或機械地壓碎或切割電池，都可能導致爆炸。
- 將電池置於極端高溫的周圍環境中，可能導致爆炸或易燃液體或氣體洩漏； 和
- 電池承受極低氣壓，可能導致爆炸或易燃液體或氣體洩漏。
文件/資源
 |
GL iNet FGB-01 開源遠端 KVM [pdf] 使用者手冊 FGB01D、2AFIW-FGB01D、2AFIWFGB01D、FGB-01 開源遠端 KVM、FGB-01、開源遠端 KVM、來源遠端 KVM、遠端 KVM、KVM |