DANFI AUDIO DF TE-2026 Vintage 三速轉盤式LP唱片機使用手冊

介紹

感謝您的購買asing the DANFI AUDIO DF TE-2026 Vintage 3-Speed Turntable LP Record Player. This manual provides essential information for the safe and efficient operation of your new record player. Please read it thoroughly before use and retain it for future reference.

The TE-2026 is a versatile record player designed to play 7", 10", and 12" vinyl records at three speeds (33 1/3, 45, and 78 RPM). It features built-in speakers, Bluetooth connectivity for streaming, RCA outputs for external speakers, a headphone jack for private listening, and a USB port for digital recording and playback.

重要安全說明

• 仔細閱讀這些說明。
• 保留這些說明以供將來參考。
• 請注意所有警告。
• 請遵循所有說明。
• 請勿在靠近水的地方使用本設備。
• 只能用乾布清潔。
• 請勿堵塞任何通風口。請按照製造商的說明進行安裝。
• 請勿安裝在任何熱源附近，例如散熱器、熱調節器、爐灶或其他設備（包括 amp液化器）產生熱量。
• 防止電源線被踩踏或擠壓，特別是插頭、方便插座以及電源線從設備引出的位置。
• 僅使用製造商指定的附件/配件。
• 在雷雨天氣或長時間不使用時，請拔除本設備的電源插頭。
• 將所有維修工作交給合格的維修人員。當設備受到任何形式的損壞時，例如電源線或插頭損壞、液體濺入或物體落入設備內、設備遭受雨淋或受潮、無法正常工作等，則需要進行維修，或已被刪除。

包裝內容

請確保所有物品齊全後再安裝：

• DANFI AUDIO DF TE-2026 Record Player
• Power unit (DC 5V/1A USB powered)
• 防滑墊
• Extra replacement needle
• 45 RPM適配器
• 使用者手冊（本文檔）

產品結束view

熟悉一下你的唱片機的各個部件。

Image: The DANFI AUDIO DF TE-2026 record player in blue, open and ready to play a vinyl record. The tonearm is visible, along with the built-in speakers on the front.

Image: A diagram highlighting key features of the record player, including Bluetooth In, Belt-Driven Damping, USB Playback & Recording, AUX in/Out & Headphone jack, Built-in Stereo Speakers, and Turntable Auto-Stop.

Image: This image displays the dimensions of the record player (13.9" x 10.1" x 5" when closed, 15.1" height when open) and close-ups of the dual knobs, premium speakers, and metal hardware.

設定

1. 拆箱： Carefully remove the record player and all accessories from the packaging. Retain packaging for future transport or storage.
2. 放置： Place the record player on a stable, level surface away from direct sunlight, heat sources, and excessive dust or vibration.
3. 電源連接： Connect the power unit to the DC 5V/1A USB port on the record player and then plug it into a suitable power outlet.
4. 移除觸控筆保護膜： Gently remove the white plastic stylus protector from the needle. Be careful not to damage the stylus.
5. 盤片設定： Place the slipmat onto the platter.

操作說明

播放黑膠唱片

1. Open the record player lid.
2. Place a vinyl record on the platter. If playing a 45 RPM single, place the 45 RPM adapter on the center spindle first.
3. 使用速度選擇開關選擇正確的速度（33 1/3、45 或 78 RPM）。
4. Turn the Power/Volume knob clockwise to turn on the unit and adjust the volume.
5. 鬆開唱臂鎖。
6. 使用唱臂升降桿抬起唱臂，並將其定位到唱片上所需的音軌上方。
7. 輕輕地用升降桿將唱臂放到唱片上。唱片就會開始播放。
8. At the end of the record, the auto-stop function will stop the platter from spinning. Lift the tonearm, return it to the tonearm rest, and engage the lock.

藍牙模式

You can stream music wirelessly from your Bluetooth-enabled device to the record player's built-in speakers.

1. 打開唱片機。
2. Switch the mode selector to "BT" (Bluetooth). The indicator light will flash, indicating pairing mode.
3. On your smartphone or other Bluetooth device, enable Bluetooth and search for "DANFI AUDIO DF" or a similar device name.
4. Select the record player to pair. Once connected, the indicator light will stop flashing.
5. 現在您可以透過唱片機的揚聲器播放裝置上的音樂。

Image: A person is shown listening to music with headphones connected to the record player. The image also illustrates the AUX input for non-Bluetooth devices and RCA line out for connecting external speakers.

輔助輸入

Connect external audio devices (e.g., CD player, MP3 player) using a 3.5mm AUX cable (not included).

1. Connect one end of the 3.5mm AUX cable to the AUX IN port on the record player.
2. 將另一端連接到外部裝置的耳機插孔或音訊輸出連接埠。
3. Switch the mode selector to "AUX".
4. 播放外部設備中的音訊。

RCA 線路輸出

Connect the record player to external powered speakers or an amplifier using RCA cables (not included) for enhanced sound.

1. Connect RCA cables to the RCA OUT ports on the back of the record player.
2. Connect the other end of the RCA cables to the audio input of your external amp揚聲器或有源揚聲器。
3. 請確保您的外部音訊系統已開啟並設定為正確的輸入來源。
4. Play a record or use Bluetooth/AUX input. Audio will be routed through the external system.

耳機插孔

如需私人聆聽，請將耳機連接至 3.5 公釐耳機插孔。

1. 將耳機插入耳機插孔。
2. 內建揚聲器將自動靜音。

USB錄音和回放

The USB port allows you to convert vinyl records to digital format (MP3/WAV) and play digital audio file來自 USB 隨身碟。

Image: This diagram illustrates how to convert vinyl music to MP3/WAV format and save it to a U disk, and also how to directly play songs stored on a U disk using the turntable's USB port.

將黑膠唱片錄製到 USB：

1. 將 USB 隨身碟插入 USB 連接埠。
2. 開始播放黑膠唱片。
3. Press the "REC" button (refer to your device's control panel for exact button). The recording will begin.
4. 再次按下“REC”鍵停止錄製。 file 將儲存到 USB 隨身碟。

Playing Music from USB:

1. Insert a USB flash drive containing MP3/WAV files 插入 USB 端口。
2. Switch the mode selector to "USB".
3. Use the playback controls (Play/Pause, Next/Previous) to navigate and play your digital audio files.

維護

清潔觸控筆

A dirty stylus can degrade sound quality and damage your records. Use a soft brush (not included) to gently clean the stylus from back to front.

Cleaning the Record Player

用柔軟的乾布擦拭設備外部。請勿使用研磨性清潔劑或溶劑。

更換手寫筆

The stylus has a limited lifespan (approximately 300-500 hours of play). A replacement needle is included. To replace:

1. Gently pull down the front of the old stylus cartridge to detach it.
2. Align the new stylus cartridge and push it upwards until it clicks into place.

故障排除

規格

• 模型： TE-2026
• 品牌： 丹菲音頻 DF
• 產品尺寸： 10 x 13.9 x 5 英寸（長 x 寬 x 高）
• 物品重量： 5.5磅
• 速度： 33 1/3、45、78 轉/分
• 連接性： Bluetooth, AUX In, RCA Out, Headphone Jack, USB
• 特點： Anti-Resonance, Digital Recorder, Auto-Stop, Built-in Speakers
• 電源供應： DC 5V/1A (USB powered)
• 材料： 工程木材
• 包含的組件： Record player, Power unit, Slipmat, Extra replacement needle, 45rpm adapter, User manual

保固和支持

For warranty information and customer support, please refer to the official DANFI AUDIO DF web請造訪網站或聯絡您的零售商。請保留您的購物收據作為購買憑證。

製造商： 丹菲音頻 DF

賣方： DANFI AUDIO LLC

退貨政策： 自購買日起 30 天內可退款/換貨。

如需進一步協助，您可以訪問 DANFI AUDIO DF Store on Amazon.