SOBO Submersible Power Head

產品結束view

The SOBO WP-5200 is a versatile submersible power head designed for various water circulation applications, including aquariums, ponds, fountains, and sump filter systems. It features a completely submersible motor for quiet and efficient operation.

主要特點：

• Completely submersible motor.
• 運作極為安靜。
• Long-lasting wear-proof ceramic shaft.
• 適用於淡水和海水環境。
• Equipped with suction cups for secure placement.

Image: SOBO WP-5200 Submersible Power Head and its retail packaging.

安全須知

• 不要空轉泵。 Operating the pump without water will cause damage.
• Do not lift or move the pump unit by pulling the power cord. Always handle the pump directly.
• The power supply cord for this appliance cannot be replaced. If the cord is damaged, the appliance must be discarded.
• Ensure the power plug is inserted into a socket outlet located at a higher point than the pump. This prevents water from flowing back via the wire to the socket outlet in case of leakage.
• Always disconnect the power supply before performing any maintenance or handling the pump.

設定

1. 開箱： 小心地從包裝中取出幫浦和所有配件。檢查是否有任何損壞。
2. Attach Outlet: Connect the appropriate hose or tubing to the pump's outlet nozzle. Ensure a secure fit to prevent leaks.
3. 放置： Place the pump completely submerged in water. The integrated suction cups on the base allow for secure attachment to the bottom or side of an aquarium or pond.
4. 流量調節： If a reduced flow rate is desired, locate the flow control lever (if present on your model) and adjust it accordingly.
5. 電源連接： Ensure your hands are dry. Plug the pump into a suitable electrical outlet, keeping in mind the safety instruction regarding socket placement.

圖片：側面 view of the SOBO WP-5200 pump, showing the suction cups for stable placement.

操作說明

Once properly installed and submerged, the SOBO WP-5200 pump will begin operating upon connection to a power source. It is designed for continuous operation in both fresh and saltwater environments.

• The pump's motor is completely submersible and engineered for quiet performance.
• Regularly check the water level to ensure the pump remains fully submerged during operation.
• Monitor the water flow to ensure optimal performance.

維護

Proper maintenance ensures the longevity and efficient operation of your SOBO WP-5200 pump.

1. 清潔進氣濾網： A clogged or dirty intake screen will reduce pump performance. Frequently wash away any debris accumulated around the intake.
2. 葉輪清洗： Periodically clean the impeller cylinder. Disassemble the pump head (refer to diagram if available) and use a small brush to remove any debris. Alternatively, flush the internal components under running water.
3. 電源檢查： Regularly check and ensure a consistent power supply to the pump unit.
4. 陶瓷軸： The pump features a long-lasting wear-proof ceramic shaft, which requires minimal maintenance but should be inspected during impeller cleaning.

圖片：正面 view of the SOBO WP-5200 pump, highlighting the water intake area that requires regular cleaning.

故障排除

• 幫浦不啟動：
  • 檢查水泵是否已正確插入正常工作的電源插座。
  • Ensure there is consistent power supply to the outlet.
  • 確認水泵完全浸沒在水中。
• 水流量減少：
  • A clogged or dirty intake screen is a common cause. Clean the intake screen and surrounding debris.
  • The impeller cylinder might be dirty. Clean the impeller as described in the Maintenance section.
  • Check if the flow control lever (if applicable) is set to a lower flow rate. Adjust as needed.
• 噪音過大：
  • Ensure the pump is fully submerged and securely placed. Vibrations can occur if not stable.
  • Check for any foreign objects obstructing the impeller. Clean the impeller area.

規格

Image: Diagram showing the dimensions of the SOBO WP-5200 Submersible Power Head.

保固和支持

This product may be eligible for an optional 1-year extended warranty by Onsitego, depending on your purchase terms. Please refer to your purchase documentation for details on warranty coverage.

For product support, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.