Quantum 610 无线游戏耳机
Download JBL QuantumENGINE to gain full access to features on your JBL Quantum headsets – from headset calibration to adjusting 3D audio to suit your hearing, from creating customized RGB lighting effects to determining how the boom microphone side-tone works. JBLquantum.com/engine
软件要求 Platform: Windows 10 (64 bit only) / Windows 11 500MB of free hard drive space for installation *Always use the latest version of Windows 10 (64 it) or Windows 11 for the most optimal experience on JBL QuantumENGINE
*JBL QuantumSURROUND and DTS Headphone:X V2.0 available on Windows only. Software installation is required.
JBL QUANTUM ENGINE SOFTWARE REQUIREMENTS
平台：Windows 10（仅限 64 位）/Windows 11
电脑| Xbox™| PlayStation™| Nintendo Switch™| 手机| MAC | 虚拟现实
|连接方式||PC||PS4 / PS5||XBOX™||Nintendo Switch™||电话||苹果电脑||VR|
|2.4G无线||JBL QuantumSURROUND™ & DTS HEADPHONE: XV2||立体声||Not Compatible||立体声||不兼容||立体声||立体声|
04* 麦克风静音/取消静音的通知 LED
05* RGB 点亮的 JBL 标志
07 3.5mm 音频插孔
08 个 USB-C 端口
14 2.4G 配对按钮
7a Connect the headset to your PC via a 2.4G USB wireless connection.
7c Under “Playback” highlight “JBL QUANTUM610 WIRELESS GAME” and select “Set Default” -> “Default Device”.
7d Highlight “JBL QUANTUM610 WIRELESS CHAT” and select “Set Default” -> “Default Communication Device”.
7e Under “Recording” highlight “JBL QUANTUM610 WIRELESS CHAT” and select “Set Default” -> “Default Device”.
7f In your chat application select “JBL QUANTUM610 WIRELESSCHAT” as the default audio device.
|频率响应：||20 Hz - 20 kHz|
|Microphone frequency response: Max||100赫兹-10 kHz|
|灵敏度：||100 dB声压级@ 1 kHz / 1 mW|
|麦克风灵敏度：||-40 dBV / Pa @ 1 kHz时|
|2.4G无线载频：||2400兆赫 - 2483.5兆赫|
|电池类型：||Li-ion battery (3.7 V / 1000 mAh) 5 V|
|电源：||中午 2:00 点|
|Music play time with RGB lighting||40小时|
|off: Microphone pickup pattern:||单向|
The SAR limit of Canada (C) is 1.6 W/kg averaged over one gram of tissue. Device types: (IC: 6132A-JBLQ610M) has also been tested against this SAR limit According to this standard, the highest SAR value reported during product certification for head use is 0.023 W/Kg.
The device was tested for typical bodily operations where the product was kept 0 mm from the head. To maintain compliance with IC RF exposure requirements, use accessories that maintain a separation distance of 0mm between the user’s head and the back of the headset. The use of belt clips, holsters, and similar accessories shall not contain etal parts in its assembly. The use of accessories that do not meet these requirements may not comply with IC RF exposure requirements and should be avoided.
USB 无线加密狗的 IC 射频暴露信息和声明
The SAR limit of Canada (C) is 1.6 W/kg averaged over one gram of tissue. Device types: (IC: 6132A-JBLQ610TMM) has also been tested against this SAR limit According to his standard, the highest SAR value reported during product certification for body use is 0.262 W/Kg.
The device was subjected to a typical head manipulation test. In order to comply with RF exposure requirements, a minimum separation distance of 0 cm must be maintained between the user ear and the product (including the antenna). Head exposure that do not meet these requirements may not meet RF exposure requirements and should be avoided. Use only the supplied or approved antenna.
The device was tested for typical bodily operations where the product was kept with 5 mm distance attaching away from the body. Non-compliance with the above restrictions may result in a violation of IC RF exposure guidelines. Use only the supplied or approved antenna.
FCC ID： APIJBLQ610M
FCC ID： APIJBLQ610TMM
|JBL Quantum 610 无线游戏耳机 [pdf] 安装指南|
JBLQ610TMM, APIJBLQ610TMM, Quantum 610, 无线游戏耳机, Quantum 610 无线游戏耳机