DTAPE激光测距仪用户手册

介绍

This manual provides detailed instructions for the safe and efficient operation of your DTAPE Laser Measure. This device is designed for precise distance measurements, offering multiple modes for various applications.

包含的内容

• ACPOTEL 165 Ft Laser Measuring Device
• 1.5V AAA Batteries
• 便携包
• 用户手册（本文档）
• 手带
• 包装盒

设置

电池安装

The DTAPE Laser Measure requires 1.5V AAA batteries. Locate the battery compartment on the back of the device, open it, and insert the batteries according to the polarity indicators. Close the compartment securely.

Figure 1: DTAPE Laser Measure and included accessories.

电源开/关

Press and hold the power button (usually marked with a power symbol) to turn the device on or off. The backlit LCD display will illuminate upon activation.

操作说明

基本距离测量

1. Point the laser aperture towards the target surface.
2. Press the measurement button (often the main central button) once to activate the laser.
3. Press the measurement button again to take a reading. The distance will be displayed on the screen.

Figure 2: The ultra-HD LCD display showing measurement results.

单位换算

To switch between measurement units (m/in/ft/ft+in), long-press the "Unit" button. The current unit will be indicated on the display.

Figure 3: Instant unit conversion between meters, feet, inches, and feet+inches.

测量参考点

The device allows you to set the measurement reference point from either the front or the back of the device. Press the reference point button (often indicated by an icon showing the device's base) to toggle between these options.

Figure 4: Switching between front and back measurement reference points.

多种测量模式

The DTAPE Laser Measure offers 7 measurement modes. Press the mode button (often indicated by a grid or multiple squares icon) to cycle through the available functions:

• 距离： Single point-to-point measurement.
• 区域： 计算表面的面积（长×宽）。
• 体积： 计算空间的体积（长 x 宽 x 高）。
• 毕达哥拉斯： Indirect measurement using the Pythagorean theorem (single or double).
• 连续测量： Real-time tracking of distance as the device is moved.
• 加法/减法： Add or subtract measurements.
• 数据存储： Stores historical measurement data.

Figure 5: Visual representation of various measurement modes including distance, area, volume, and Pythagorean.

Official Product Video: DT50 Laser Distance Meter

维护

The DTAPE Laser Measure is designed with an IP54 rating, providing protection against dust and splashing water.

• 用柔软的干布擦拭以保持设备清洁。
• 避免将设备长时间暴露在极端温度或阳光直射下。
• Store the device in its portable bag when not in use to protect it from dust and impacts.
• 如果长时间不使用设备，请取出电池以防止漏液。

故障排除

If you encounter issues with your DTAPE Laser Measure, consider the following:

• 设备未开机： 检查电池安装情况，确保电池电量充足。如有必要，请更换电池。
• 读数不准确： Ensure the laser aperture is clean and unobstructed. Verify the correct reference point is selected. Measure on a stable, non-reflective surface.
• 激光不可见： In very bright conditions, the laser dot may be difficult to see. Try to shade the target area or use the device in lower light.

For persistent issues, refer to the detailed user manual included in the package or contact customer support.

规格

保修和支持

Your DTAPE Laser Measure comes with a 24-Month Warranty, ensuring peace of mind regarding product quality and performance.

For technical support, warranty claims, or any inquiries, please contact ACPOTEL customer service. Refer to the contact information provided in your product packaging or on the official ACPOTEL web地点。