User Manual
Zemismart Zigbee Wave
Smart Switch

Specification

Note: Please power off before installation

Installation

• Use a small screwdriver to open the glass cover from the notch.
  
• Load the wall cassette and fix screws, cover the plate.
  
• Supply power, it will with RGB light cycle in 2 times.

Pairing mode

1. Remove the glass.
2. Press and hold the setting button for 7 seconds, it will with a di-da-di-da sounds, and the RGB lights keep running, it means that entering pair mode.
   
3. Use Tuya app to discove it.

Connect to Tuya APP

1. Open Tuya app-Zigbee hub-Add subdevice.
2. Click “LED already blink”.
3. Click “Done”.
   
4. Connection succeeded.
   

How to use it

Wave your hand near to the switch within 15cm,it will be turn ON/OFF.

1. Turn ON the switch RGB light cycle in 2 times, then lights up blue (medium brightness), then turns off after 10 seconds.
   
2. Turn OFF the switch
   RGB light cycle in 2 times, then lights up white (maximum brightness), then turns off after 10 seconds.
   

Documents / Resources

ZEMISMART ZM-H1 Zigbee Wave Smart Switch [pdf] User Manual ZM-H1 Zigbee Wave Smart Switch, ZM-H1, Zigbee Wave Smart Switch, Wave Smart Switch, Smart Switch, Switch

References

• User Manual