ZCS Z91 Handheld Smart POS Device



Z91 Android airtime POS with printer & fingerprint collection module(optional) , android 9.0 operating system, 5.5-inch screen touch, super long standby battery capacity is 2800 mAh/7.4V, thermal paper printer, 5 Mega-pixel camera, 2G / 3G / 4G /wifi, Bluetooth communication, this fine workmanship, and top quality machine is the best choice in the market.


  • Android 9.0 operating system: Adopting the open android system, can let the user a simple and efficient development of the upper application.
  • Serviceable range: apply chain supermarkets, restaurants, Parking systems, Prepaid airtime top up, convenience stores, clothing stores, premises, bakeries, cashier, pay, enters sells saves the business management function.

Technical Specification

Operating System Android 9.0
CPU model MTK Quad-Core Processor
CPU Clock Range 1.3GHz
LCD Screen 5.5 inch
Display Resolution 720*1280
Backlit LED
Touch Screen Capacitive Five-Point Touch
Fingerprint collection module(optional) Spatial resolution :508 DPI Active sensor area :12.8mm*18.0mm






WIFI, 802.11a/b/g/n, 2.4G+5G


Voice call Support
Data Support
SMS&MMS Support
WIFI Module 802.11a/b/g/n, 2.4G+5G
Bluetooth Support
GPS Support
Rear Camera 5 Mega-pixel
Speaker Support
Microphone Support
Card Slot SIM ×2; SD×1(support SD3.0, up to 128GB)
Physical button power button x 1
Dimension 199.75mm x 83mm x 57.5mm
Weight 414g (one package box including product is 750g)
Battery Lithium Battery
Battery Capacity 7.4V  2800mAh
Power adapter 5V DC/2A
Standard NFC reader Support ISO / IEC 14443 A&B,Mifare,felica card, conform to EMV / PBOC PAYPASS standard ,(Option)


Paper width:58mm
Max. paper roll diameter:40mm
Charging indicator light Single color LED
Standard Accessories 1pc power adaptor, 1pc User Manual, 1pc USB-type C cable, 1 roll 58mm thermal paper
Optional Accessories Silicon case ,Hand Belt,Fingerprint scanner
Temperature Storage temperature: -10℃-60℃ Working Temperature: 0℃-50℃
Certificate FCC, CE,RoHS

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

The device has been evaluated to meet the general RF exposure requirements. The device can be used in portable exposure conditions without restriction. Additional information on Specific Absorption Rates (SAR) can be found on the Cellular Telecommunications Industry Association (CTIA) website at http://www.wow-com.com. * In the United States and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kg (W/kg) averaging over one gram of tissue. The standard incorporates a substantial margin of safety to give additional protection for the public and to account for any variations in measurements.

Shenzhen ZCS Technology CO., LTD
Add: 202C, G2 Building, TCL World E City, Zhongshan Yuan Road, Nanshan District, Shenzhen, China

Documents / Resources

ZCS Z91 Handheld Smart POS Device [pdf] User Manual
Z91, 2A8NR-Z91, 2A8NRZ91, Handheld Smart POS Device, Z91 Handheld Smart POS Device, Smart POS Device, POS Device, Device


Leave a comment

Your email address will not be published. Required fields are marked *