YZQ P3 Video WiFi Projector
Product Information
Video WiFi Projector
The Video WiFi Projector is a versatile device that allows you to project videos, music, and images onto a wall or screen, providing an immersive viewing experience. This projector comes with a variety of interfaces, including USB, HDMI, AV, and TF cards, allowing you to connect to different devices easily. It also has a quick start feature that makes it easy to set up and use. Moreover, this projector features built-in WiFi connectivity, making it easy to stream content from your mobile device or laptop.
Package List
- Video WiFi Projector
- Remote Control
- User Manual
- HDMI Cable
- 3 in 1 AV Cable
- Power Cable
The projector has various interfaces and buttons, including:
- Power key
- Direction key Play/Pause
- Menu
- Signal selection
- Volume down/up
- Fast reverse/forward
- OK
- Return/Previous/Next
- Mute
- Focus Wheel
- IR Receiver
- USB/HDMI/AV/Audio/TF Card Ports
- Electronic Keystone Adjust
- Lens
- IR Receiver
- USB
- HDMI
- AV
- Audio
- TF Card
- Focus Wheel
- Power Port
- IR Receiver
Usage Instructions
- Plug the power cable into the outlet, then plug it into the machine.
- Remove the lens cover.
- Connect your device to the projector with the correct adapter/cable.
- Press the power button to light it on.
- Choose your videos/music/images to play.
- Adjust the focus wheel to get a clear image. And go to the menu to adjust the 4D Keystone to get a rectangular image.
- Adjust the knob bracket to get the best height as needed.
- Press the power button twice to turn it off.
Connection Instruction
iOS Screen Mirroring
Streaming with router’s WiFi (Support 5G)
- Go to Homepage >Settings > WIFI Setting, turn on the WiFi switch and connect the projector to your router’s WiFi signal.
- Connect your iOS device to the same Wi-Fi signal.
- Go to Homepage > iOS Cast to enter the interface of Screen Mirroring for iOS System.
- Activate Screen Mirroring on your iOS device and select PROJECTOR-XXXXXX from the search list.
- The display of your iOS device will be projected to the wall/screen.
Android Screen Mirroring
Note:
To activate this function, please make sure your Android device supports Multi-screen/Wireless display/Smart View. Name may vary by different phone manufacturers.
- Go to Homepage >Miracast to enter the interface of Screen Mirroring for Android System.
- Enable Multi-screen/Wireless display/Smart View on your Android device.
- Select PROJECTOR-XXXXXX from the search list.
- The display of your iOS device will be projected to the wall/screen.
Multi Interfaces
Projection Distance
The projection distance ranges from 40 to 240 inches, with the optimum projection distance being 120 inches.
Specification
- Input: USB/HDMI/AV/Audio/TF Card
- Resolution: 1280 x 720p
- Brightness: 2000 lumens
- Contrast Ratio: 1000:1
- Aspect Ratio: 16:9 or 4:3
- Projection Distance: 40 – 240 inches
- Power Consumption: 50W
Display Technology | Light Source | Native Resolution | Support Resolution |
LCD | LED | 1920 x 1080 | 576i、576P、720i、 720P、1080i、1080P |
Project Distance | Project Size | Focus Adjust | Aspet Ratio |
1.22-6.7M | 40″-240″ | Manual | 4:3/16:9/auto |
Speakers | Electronic Keystone | Product Size | Setup Type |
3W/4Ω | ±50 | 260*200*90mm | Front/Rear/Ceiling |
Input Voltage | Product Weight | Supported Video Formats | Support Image Formats |
AC100-240V | 1.67kg | AVI/MP4/MKV/MOV/ RMVB/3GP/WMV/ VOB/DAT/MPG/FLV | BMP/JPG/JPEG PNG/GIF |
Input | Supported Audio Formats | BT Support | |
HDMI*1/USB*1 Audio Out*1/AV IN*1 TF Card Slot*1 | MP2/MP3/WMV/ OGG/AAC/FLAC | For sound transmission (8m) |
Attention
Troubleshooting
- Connect to iPhone
- Screen Mirror: Choose the [iOS Cast] input source, you can connect your iPhone to the projector Wireless or Wired by following the steps.
- HDMI Connect: Use an Apple Lightning Digital AV Adapter (not included) to connect them via HDMI port.
- The image is blurry
- Adjust the keystone to a rectangle first(Electronic Keystone Correction on the menu).
- Adjust the focus wheel to get clear(Manual Correction).
- Make sure the projector and wall/screen are within effective distance.
- The remote can’t work
- The remote control is aimed at the IR receiver on the machine.
- Do not block the IR receiver.
- Replacement battery.
- Flip the projection image
- Change the projection image mode on the menu to fit your need.
- Connect to Bluetooth speaker
- Go to Settings – Bluetooth – Switch On.
- Search Bluetooth – Choose your Bluetooth speaker -paired successfully.
Documents / Resources
![]() | YZQ P3 Video WiFi Projector [pdf] User Manual P3 Video WiFi Projector, P3, Video WiFi Projector, WiFi Projector, Projector |