PWM-60-KN Series 60W Constant Voltage PWM O wu KNX LED Driver
Awọn pato
- Awoṣe: PWM-60-12, PWM-60-24
- DC Voltage: 12V, 24V
- Ti won won Lọwọlọwọ: 5A, 2.5A
- Ti won won Agbara: 60W
- Iwọn Dimming Abajade: 0 – 100%
- Igbohunsafẹfẹ PWM (Iru.): 200 – 4000Hz (olumulo
iyipada nipasẹ ETS) - Eto, Aago dide: 500ms, 80ms / 115VAC tabi
230VAC - Akoko idaduro (Iru): 16ms / 115VAC tabi
230VAC - Voltage Ibiti: 90 - 305VAC, 127 - 431VDC
- Iwọn Igbohunsafẹfẹ: 47 – 63Hz
- Okunfa Agbara (Iru): PF> 0.97 / 115VAC, PF
> 0.95 / 230VAC, PF> 0.92 / 277VAC @ fifuye kikun - Àpapọ̀ ìdàrúdàpọ̀ ti irẹ́pọ̀: THD <20%
- Iṣiṣẹ (Iru): 86%
- AC Lọwọlọwọ (Iru): 0.8A / 115VAC, 0.4A /
230VAC, 0.32A / 277VAC - Inrush Lọwọlọwọ (Iru): Ibẹrẹ tutu 50A
(iwọn = 350s ti a wọn ni 50% Ipeak) ni 230VAC - O pọju. Nọmba ti PSU lori 16A Circuit Breaker: 9
sipo (Circuit fifọ ti iru B) / 16 sipo (Circuit fifọ ti
iru C) ni 230VAC
Awọn ilana Lilo ọja
Fifi sori ẹrọ
- Rii daju pe orisun agbara pade voltage ati igbohunsafẹfẹ
awọn ibeere pato ninu awọn Afowoyi. - So awakọ LED pọ si orisun agbara ti o tẹle okun
aworan atọka pese. - Gbe awakọ LED ni agbegbe ti o ni afẹfẹ daradara lati taara
orun ati ọrinrin.
Dimming Oṣo
Lati ṣatunṣe iwọn dimming, tẹle awọn igbesẹ wọnyi:
- Wọle si awọn eto dimming nipasẹ wiwo ETS.
- Yan ogorun dimming ti o fẹtage laarin 0 to
100%. - Daju iṣẹ dimming nipasẹ idanwo LED ti a ti sopọ
awọn amuduro.
Laasigbotitusita
Ti o ba pade eyikeyi awọn ọran pẹlu awakọ LED, tọka si
apakan laasigbotitusita ti Afowoyi tabi kan si atilẹyin alabara
fun iranlowo.
FAQ
Q: Ṣe MO le lo awakọ LED yii pẹlu awọn imuduro LED dimmable?
A: Bẹẹni, PWM-60-KN jara LED awakọ atilẹyin LED dimmable
amuse laarin awọn pàtó kan dimming ibiti o.
Q: Bawo ni MO ṣe le yi igbohunsafẹfẹ PWM pada?
A: Awọn igbohunsafẹfẹ PWM le ti wa ni titunse nipasẹ awọn ETS ni wiwo bi
fun awọn ilana itọnisọna olumulo ti a pese.
Q: Kini nọmba ti o pọju ti awọn awakọ LED ti o le jẹ
ti a ti sopọ si a 16A Circuit fifọ?
A: Nọmba ti o pọju ti awọn awakọ LED da lori iru
Circuit fifọ lo. Jọwọ tọka si iwe afọwọkọ fun pato
awọn alaye.
PWM – 6 0 – KN 60W Constant Voltage PWM O wu KNX LED Driver
jara
Itọsọna olumulo
– ()
File Orukọ: PWM-60-KN-SPEC 2024-03-12
60W PWM O wu KNX LED Driver
PWM-60-KN jara
PATAKI
AṢE
PWM-60-12
PWM-60-24
DC VOLTAGE
12V
24V
Ti won won lọwọlọwọ
5A
2.5A
AGBARA TI WON
60W
60W
O wu DIMMING ibiti o
0 ~ 100%
PWM FREQUENCY (Iru.) 200 ~ 4000Hz olumulo yipada nipasẹ ETS
SETUP, RISE TIME Note.2 500ms, 80ms/ 115AC tabi 230VAC
ÀKÓKÒ DÚRÒ (Irú)
16ms/115VAC tabi 230VAC
VOLTAGE RANGE AKIYESI.3
90 ~ 305VAC 127 ~ 431VDC (Jọwọ tọka si apakan “SATIC CHARACTERISTIC”)
Igbohunsafẹfẹ ibiti
47 ~ 63Hz
FACTOR AGBARA (Iru.)
PF>0.97/115VAC, PF>0.95/230VAC, PF>0.92/277VAC @ fifuye kikun (Jọwọ tọka si apakan “AGBARA FACTOR (PF) HARACTERISTIC”)
Àpapọ̀ ìrẹ́pọ̀
THD< 20%(@load60%/115VAC, 230VAC; @load75%/277VAC) (Jọwọ tọka si apakan “Apapọ HARMONIC DISTORTION”)
ÀWỌN Ọ̀RỌ̀
AGBARA (Iru.) AC lọwọlọwọ (Iru.) INRUUS lọwọlọwọ (Iru.)
86%
89%
0.8A / 115VAC 0.4A / 230VAC 0.32A / 277VAC COLD START 50A(iwọn = 350s ti a wọn ni 50% Ipeak) ni 230VAC; Fun NEMA 410
MAX. RARA. ti PSUs lori 16A CIRCUIT BREAKER
Awọn ẹya 9 (olufọkasi ti iru B) / awọn ẹya 16 (fifọ iru C) ni 230VAC
Isọjade lọwọlọwọ
<0.25mA / 277VAC
<0.5W
APOJU
108 ~ 130% ti a ṣe iwọn agbara iṣelọpọ ipo Hiccup, gba pada laifọwọyi lẹhin ti o ti yọ ipo aṣiṣe kuro
KIRI KURO
Pa o/p voltage, tun-agbara lati bọsipọ
IDAABOBO LORI VOLTAGE
15 ~ 17V Pa o/p voltage, tun-agbara lati bọsipọ
28 ~ 34V
LORI IGBAGBÜ Pa o/p voltage, tun-agbara lati bọsipọ
IDANWO SISE.
Tcase = -35 ~ +85 (Jọwọ tọka si "OUTPUT LOAD vs TEMPERATURE" apakan)
MAX. ÌṢẸ́ ỌJỌ́.
Tcase=+85
Ọriniinitutu Ṣiṣẹ
20 ~ 95% RH ti kii ṣe idapọmọra
ÌGBÀ ÌṢÍJỌ́ ÀYÀYÀ., Ọ̀RỌ̀ -35 ~ +80, 10 ~ 95% RH
TEMP. ALAGBARA
± 0.03% / (0 ~ 50)
VIBRATION
10 ~ 500Hz, 5G 12min./1cycle, akoko fun 72min. kọọkan pẹlú X, Y, Z ãke
AABO awọn ajohunše
Akiyesi.5
ENEC BS EN/EN61347-1, BS EN/EN61347-2-13, BS EN/EN62384 EAC TP TC 004 fọwọsi
ominira, GB19510.14, GB19510.1,
KNX awọn ajohunše
Ilana ti a fọwọsi
FISTAND VOLTAGE
AABO & EMC
IPINLE RESISTANCE
EMC EMISSION Akiyesi.6
I/PO/P:3.75KVAC
I/PO/P:100M Ohms/500VDC/25/ 70% RH
Ibamu si BS EN/EN55015, BS EN/EN61000-3-2 Kilasi C (@load60%); BS EN/EN61000-3-3,GB/T 17743, GB17625.1;EAC TP TC 020
EMC ajesara MTBF
Ibamu si BS EN/EN61000-4-2,3,4,5,6,8,11; BS EN/EN61547, ipele ile-iṣẹ ina (laini ajesara 2KV), EAC TP TC 020
2135.2K wakati min. Telcordia SR-332 (Bellcore); 247.7K wakati min. MIL-HDBK-217F (25)
MIIRAN DIMENSION
150*53*35mm (L*W*H)
Iṣakojọpọ
0.45Kg; 30pcs / 16.0Kg / 1.0CUFT
AKIYESI
1. Gbogbo awọn paramita NOT ti a mẹnuba pataki ni a wọn ni titẹ sii 230VAC, ti a ṣe iwọn lọwọlọwọ ati 25 ti iwọn otutu ibaramu. 2. De-Rating le wa ni ti nilo labẹ kekere input voltages. Jowo tọka si awọn apakan “IWA IBI” fun awọn alaye. 3. Gigun akoko iṣeto ni a ṣe iwọn ni ibẹrẹ tutu akọkọ. Titan/PA awakọ le ja si ilosoke akoko iṣeto. 4. A ṣe akiyesi awakọ naa gẹgẹbi paati ti yoo ṣiṣẹ ni apapo pẹlu ohun elo ikẹhin. Niwọn igba ti iṣẹ EMC yoo kan
nipasẹ fifi sori ẹrọ pipe, awọn aṣelọpọ ohun elo ti o kẹhin gbọdọ tun ṣe deede Ilana EMC lori fifi sori ẹrọ pipe lẹẹkansi. (bi o wa lori https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf) 5. Yi jara pàdé awọn aṣoju aye ireti> 50,000 wakati ti isẹ nigba ti Tcase, paapa tc ojuami (tabi TMP, fun DLC). ), jẹ nipa 75 tabi kere si. 6. Jọwọ tọka si alaye atilẹyin ọja lori MEAN WELL's webAaye ni http://www.meanwell.com 7. Iwọn otutu ibaramu ti 3.5/1000m pẹlu awọn awoṣe ti ko ni afẹfẹ ati ti 5/1000m pẹlu awọn awoṣe afẹfẹ fun iṣẹ giga ti o ga ju 2000m(6500ft). 8. Fun eyikeyi akọsilẹ ohun elo ati iṣẹ iṣeduro fifi sori omi IP omi, jọwọ tọka itọnisọna olumulo wa ṣaaju lilo. https://www.meanwell.com/Upload/PDF/LED_EN.pdf
Ifijiṣẹ Layabiliti Ọja Fun alaye alaye, jọwọ tọka si https://www.meanwell.com/serviceDisclaimer.aspx
File Orukọ: PWM-60-KN-SPEC 2024-03-12
60W PWM O wu KNX LED Driver
DIMMING isẹ
PWM-60-KN jara
AC/L(Brown) AC/N(bulu)
PWM-60-KN
Ilana dimming fun iṣelọpọ ara PWM Dimming jẹ aṣeyọri nipasẹ yiyatọ iwọn iṣẹ-ṣiṣe ti lọwọlọwọ iṣelọpọ.
O wu DC lọwọlọwọ ON
Io=0A
PA TON
T
TON Ojuse ọmọ (%) =
×100%
T
Ijadejade igbohunsafẹfẹ PWM to 4KHz
Vo+(Pupa) Vo-(dudu) KNX+(Pupa) KNX-(dudu)
KNXInterface Waye ifihan agbara KNX laarin KNX + ati KNX-. Eto ohun elo (database) le ṣe igbasilẹ nipasẹ Awọn katalogi Ayelujara lati ETS tabi nipasẹ http://www.meanwell.com/productCatalog.aspx
File Orukọ: PWM-60-KN-SPEC 2024-03-12
60W PWM O wu KNX LED Driver
O wu fifuye vs otutu
PWM-60-KN jara
Fifuye (%)
IKÚN THD (%)
100
80 230VAC Igbewọle nikan
60 50 40
20
-35 -25 -10
0
15
30
50
60
IRU otutu ibaramu, Ta ()
70 (petele)
Fifuye (%)
100
80 230VAC Igbewọle nikan
60
40
20
-35 -25
20
45
60
70
80
85 (petele)
Tcase ()
ÀWỌN ÀWỌN ÌSÌN
100 90 80 70 60 50 40
90 100 125 135 145 155 165 175 180 200 230 305
IPIN iwọleTAGE (V) 60Hz De-Rating wa ni ti nilo labẹ kekere input voltage.
PATAKI HARMONIC lapapọ (THD)
24V Awoṣe, Tcase ni 75
25
20
15
10
5
0
50%
60%
70%
80%
90%
GBIGBE
115VAC 230VAC 277VAC
100%
IṢẸ́(%)
PF
AGBARA FACTOR (PF) abuda
Apejọ ni 75
1 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1
0 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%
GBIGBE
115V 230V 277V
AGBARA vs fifuye
PWM-60-KN jara ni iṣẹ ṣiṣe ti o ga julọ ti o to 89% le de ọdọ awọn ohun elo aaye. 24V Awoṣe, Tcase ni 75
95
90
85
80
75
115V
70
230V
65
277V
60
55
50 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%
GBIGBE
File Orukọ: PWM-60-KN-SPEC 2024-03-12
60W PWM O wu KNX LED Driver
LIFE TIME
PWM-60-KN jara
ASIKO AYE(Kh)
120
100
80
60
40
20
0
25
35
45
55
65
75
85
Tcase()
File Orukọ: PWM-60-KN-SPEC 2024-03-12
60W PWM O wu KNX LED Driver
PWM-60-KN jara
Àkọsílẹ aworan atọka
EMI Ajọ
I / P
&
RIFIFIERS
PFC fosc: 50 ~ 120KHz PWM fosc: 60 ~ 130KHz
PFC CIRCUIT
AGBARA Yipada
OTP
OLP
PWM & PFC Iṣakoso
Awọn olupilẹṣẹ &
FILE
OLP
DIMMING CIRCUIT
IRCUIT Iwari
OVP
Vo+ VoKNX+ KNX-
Akiyesi: PWM fosc nibi ko ni ibatan si didasilẹ PWM jade
Mechanical Specification
Ọran No. PWM-60KN Unit: mm
AC/L(Brown) AC/N(bulu)
300 ± 20
Bọtini siseto 150 KNX & LED 5
SJTW 18AWG×2C
4.5
tc 35
5
tc: o pọju. Case otutu
KNX asopo wa ninu apoti
300±10 Ul2464 18AWG×2C(Vo+,Vo-)
Ul2464 20AWG×2C(KNX+,KNX-) 350±10
Vo+(Pupa) Vo-(dudu) KNX+(Pupa) KNX-(dudu)
5 53
13 5
35
Ẹ̀rọ view ti nipa ìbéèrè
AC/L(Brown) AC/N(bulu)
Vo+(Pupa) Vo-(dudu) KNX+(Pupa) KNX-(dudu)
File Orukọ: PWM-60-KN-SPEC 2024-03-12
60W PWM O wu KNX LED Driver
So Iṣagbesori Itọsọna
PWM-60-KN jara
Fifi sori Afowoyi Asopọ fun KNX-Iru
AC/L(brown) AC/N(buluu)
Vo+(RED)
+
–
Vo-(BLACK)
KNX+(pupa)
LED rinhoho tabi ibakan voltage LED boolubu
KNX- (BLACK) PWM KN jara le jẹ adirẹsi ETS / siseto LAYI asopọ si awọn mains AC.
KNX akero
Awọn iṣọra Ṣaaju ki o to bẹrẹ eyikeyi fifi sori ẹrọ tabi iṣẹ itọju, jọwọ ge asopọ ipese agbara lati inu ohun elo naa. Rii daju
pe ko le tun sopọ lairotẹlẹ! Jeki fentilesonu to dara ni ayika ẹyọ naa ki o ma ṣe gbe nkan kankan sori rẹ. Tun kan 10-15 cm kiliaransi gbọdọ wa ni pa nigbati
ẹrọ ti o wa nitosi jẹ orisun ooru. Iṣalaye iṣagbesori miiran ju iṣalaye boṣewa tabi ṣiṣẹ labẹ iwọn otutu ibaramu giga le pọ si
ti abẹnu paati otutu ati ki o yoo beere a de-rating ni o wu lọwọlọwọ. Iwọn lọwọlọwọ ti okun alakọbẹrẹ/atẹle ti a fọwọsi yẹ ki o tobi ju tabi dọgba si ti ẹyọ naa. Jọwọ tọkasi
si awọn oniwe-sipesifikesonu. Iye ti o ga julọ ti Tc. ti wa ni idanimọ lori aami ọja. Jọwọ rii daju pe iwọn otutu ti aaye Tc kii yoo kọja opin. MAA ṢE so "KNX- si Vo-". Ipese agbara ni a gba bi paati ti yoo ṣiṣẹ ni apapo pẹlu ohun elo ikẹhin. Niwon EMC
iṣẹ ṣiṣe yoo ni ipa nipasẹ fifi sori ẹrọ pipe, awọn aṣelọpọ ohun elo ikẹhin gbọdọ tun ṣe deede Ilana EMC lori fifi sori ẹrọ pipe lẹẹkansi.
File Orukọ: PWM-60-KN-SPEC 2024-03-12
Awọn iwe aṣẹ / Awọn orisun
 |
ITUMO DARA PWM-60-KN Series 60W Constant Voltage PWM O wu KNX LED Driver [pdf] Afọwọkọ eni PWM-60-KN jara, PWM-60-KN jara 60W Constant Voltage PWM O wu KNX LED Driver, 60W Constant Voltage PWM Iwajade KNX LED Driver, Voltage PWM Iwakọ KNX LED Iwakọ, Iwakọ PWM KNX LED Awakọ, Awakọ LED KNX, Awakọ LED, Awakọ |