IP POE Speaker & IP PA Intercom System Manufacturer | SPON
Owner's Manual for SPON models including: XC-9610, XC-9610 IP PoE Ceiling Speaker, XC-9610, IP PoE Ceiling Speaker, PoE Ceiling Speaker, Ceiling Speaker, Speaker
prieš 2 dienas — 1×Quick Installation Guide. 1×QualityCertificate&Warranty Card. Compliance. CE ... The IP PoE Ceiling Speaker XC-9610 support “Multicast scalable” function ,when ...
5 days ago — 2014/35/EU). XC-9610 SERIES. SPECIFICATION. 02. Page 3. PORTS DESCRIBTION. ① Network Port: ② Reserved Port: ③ Power Port: To connect with Ethernet switch. 1, ...
File Info : application/pdf, 6 Pages, 1.68MB
DocumentDocumentXC-9610 SERIES
XC-9610
Network Ceiling Speaker
SPON IP PoE Ceiling Speaker XC-9610 is a SIP compliant and multicastcapable PoE network audio device for public address and notification, it supports common network protocols for easy integration with SIPcompatibal VOIP system . It is suitable for hotelcompany and other indoor public areas that need simple wiring.
SIP
Main features
Performance and Encoding
{ Employs a high-speed, industrial-grade dual-core (ARM+DSP) chip for superior processing power
{ Features versatile voice encoding with both narrowband (G.711a/u) and broadband (G.722) options for crystal-clear voice paging.
Connectivity & System Integration
{ Supports receiving paging from SIP phones through 10 dedicated multicast addresses
{ Incorporates a multicast scalable function, efficiently saving SIP account resources
{ Fully compatible with standard SIP protocols for seamless integration with leading SIP PBX systems like Yeastar, Asterisk, and Cisco.
Audio Management & Network Functionality
{ Facilitates background music, emergency paging, and alarm signals from the SPON management system
{ Features dynamic volume control that automatically adjusts based on ambient noise
{ Offers flexible deployment with PoE or PoE+ interface support
{ Equipped with remote management and online upgrading capabilities for ongoing system optimization.
01
XC-9610 SERIES
SPECIFICATION
Power Parameters
Power Supply:
Standby Power Consumption: Rated Power Output:
DC 24V/1A, PoE (IEEE802.3af), PoE+ (IEEE802.3at)
3W
20W(@DC 24V/1A powered)
15W (@PoE powered)
20W (@PoE+ powered)
Audio Parameters
Audio Codec:
Sensitivity:
Maximum SPL:
S/N (Signal-to-Noise) Ratio:
Audio Sampling & Bit Rate: Frequency Response:
G.711A-law, G.711-law, G.722 88dB±3dB (1W, 1m) 97dB±3dB 80dB
8kHz~44.1kHz, 16bit, 8kbps~320kbps 100Hz~18kHz
Network Parameters
Network I/F: Network Protocol:
Configuration Method:
10BASE-T/100BASE-TX RJ45 SIP (RFC3261),FTP,HTTP,TCP/ IP,UDP,ARP,ICMP,IGMP Web Interface or DevConfig Tool
Mechanical&Environment Properties
Mounting Method:
Ceiling-mounted
Installation Environment: Dry Indoor Locations Only
Operatiing Temperature: -20~+50 (-4~122)
Operating Humidity:
10%~90% RH non-condensing
Body Material:
ABS Composite Plastic
Color:
Off-White
Product Dimensions:
213x165mm
Product Weight:
1.4KG
Packaging:
Carton Box
Packed Dimensions:
260x250x240mm
Packed Weight:
2.4KG
Product Warranty:
2 Years Limited
Accessories
1×2-Pin Pluggable Terminal Block Connector (3.81mm Pitch,AWG 26-16)
1×Waterproof Joint
1×Quick Installation Guide 1×QualityCertificate&Warranty Card
Compliance
CE (EMC Directive 2014/30/EU)CE (LVD Directive 2014/35/EU)
02
CDOIANGNREACMTION
XC-9610 SERIES
PORTS DESCRIBTION
Network Port: To connect with Ethernet switch.
Reserved Port:1,2 Alarm Input , 3,4 Audio Input
Power Port: To connect with power supply.
INSTALLATION
1. Drilling a hole, the size please refer to the dimension diagram.
2.Connecting the network cable with the IP Ceiling Speaker. (The network
cable should be placed in the hole).
3. Placing the speaker in a suitable place to the hole, and ensure it is fixed
well.
03
XC-9610 SERIES
APPLICATION
Application 1
The IP PoE Ceiling Speaker XC-9610 support SIP protocol which can be independently used as a sip endpoint to integrated with mainstream VOIP system for receiving sip call from SIP phone or SIP softphone ; Meanwhile , it also can receive broadcast from SPON management software IP Paging Mic and XC-APP.
Application 2
The IP PoE Ceiling Speaker XC-9610 support paging from SIP phone by using multicast address , the multicast address and priority can be set on its webpage .
04
XC-9610 SERIES
APPLICATION
Application 3
The IP PoE Ceiling Speaker XC-9610 suppor t "Multicast scalable" function ,when SIP phone initiate call to one horn speaker which registered to VOIP system, the other speakers with same multicast address will simultaneously receive the sip calling from the SIP phone.
Application 4
he IP PoE Ceiling Speaker XC-9610 suppor t "Loud ringing extension"function. The assistant ringing SIP account of horn speaker and the SIP phone can be put into a ringing group(set on XC-9000). When calling to group account, all terminals in the same group will ringing. The ringing will be stopped after the call is answered by sip phone.
05
case
XC-9610 SERIES
SPON Communications Co., LTD
Address: No.70, Nantang Road, High-tech Zone, Changsha, China. Mobile: +86 138 7314 3517 email: inquiry@sponcomm.com Tel: +86 731 8557 0190
www.sponcomm.com