AVILOO Flash Test Instruction Manual

Idanwo Flash

Awọn pato ọja

  • Brand: Aviloo
  • Awoṣe: Filaṣi Igbeyewo Ṣeto
  • Ẹya: 07/25
  • Ifihan: LED
  • Indicator Lights: Blue (booting up), Yellow (test in progress),
    Red (test failed), Green (test completed)
  • Ibeere Ijinna: Ṣe itọju ijinna ti 20 cm lakoko
    isẹ

Awọn ilana Lilo ọja

1. Flash Test Set Up

Make sure the vehicle is not charging before proceeding with the
flash test setup.

2. Perform the Flash Test

During the flash test, observe the LED display on the Aviloo
Apoti:

  • Flashing blue: Indicates that the box is booting up.
  • Yellow light: Test is in progress.
  • If red lights up: Flash test failed (refer to notes at bottom
    ọtun).
  • Imọlẹ alawọ ewe: Gbigbe data.
  • Imọlẹ alawọ ewe: Idanwo ti pari.

3. End of the Flash Test

After completing the flash test, take these actions:

  1. Check at https://aviloo.link/database whether the vehicle can
    wa ni idanwo.
  2. Repeat the flash test according to the instructions if
    nilo.
  3. If issues persist, contact AVILOO Customer Management for
    iranlowo.

Please note: Any changes or modifications not approved by Aviloo
may void the user’s authority to operate the equipment. Ensure to
maintain a distance of 20 cm during operation.

Awọn Ibeere Nigbagbogbo (FAQ)

Q: What should I do if the Aviloo Box LED displays a red
imole?

A: If the red light comes on during the flash test, it indicates
a test failure. Refer to the notes at the bottom right for more
information and consider repeating the test following the
ilana pese.

“`

Awọn itọnisọna kukuru fun AVILOO FLASH Idanwo idanwo batiri ni awọn igbesẹ 3 rọrun

Išọra: Rii daju pe ọkọ ko wa
gbigba agbara.

1

FLASH igbeyewo soke

2

SE FLASH igbeyewo

· Ṣii ilẹkun awakọ (jẹ ki o ṣii lakoko idanwo).
· VW, Skoda, Cupra ati Awọn awoṣe ijoko: ṣii hood ṣaaju ki o to ṣafọ sinu apoti AVILOO (ko ṣe pataki lati ṣii).
· Plug the AVILOO Box into the OBD-2-port (for Tesla models see installation video).
· Please start the vehicle and briefly put it into drive mode (with the brake applied) to activate the systems required for the test. You can then return the vehicle to park mode. Fastening the seatbelt will keep all relevant systems active.

· Duro fun awọn ofeefee ìmọlẹ kan LED afihan wipe AVILOO Àpótí ti šetan fun FLASH igbeyewo.
· Di igbanu ijoko awakọ lati jẹ ki awọn ọna ṣiṣe pataki fun idanwo naa ṣiṣẹ.
· Duro fun LED alawọ ewe to lagbara, eyiti o tọka si pe Idanwo FLASH ti pari.

· Italolobo: The AVILOO WebAPP ṣe iranlọwọ fun ọ lati wa ibudo OBD-2 ninu ọkọ.

3

OPIN TI FLASH igbeyewo

· Pa ọkọ.
· Unbuckle awọn ijoko igbanu.
· Yọọ AVILOO Àpótí.
Pa ilẹkun awakọ ati, ti o ba jẹ dandan, hood.
· Iwe-ẹri AVILOO BATTERY jẹ fifiranṣẹ nipasẹ imeeli si adirẹsi ti a forukọsilẹ si apoti AVILOO oniwun.

Jọwọ ṣakiyesi: Awọn iyipada tabi awọn iyipada ti Aviloo ko fọwọsi ni pato le sọ aṣẹ olumulo di ofo lati ṣiṣẹ ohun elo naa. Eyi jẹ ẹrọ alagbeka ati olumulo gbọdọ rii daju pe wọn ṣetọju ijinna ti 20 cm lakoko iṣẹ.

AVILOO BOX LED-DISPLAY
Buluu didan: tọkasi pe apoti naa n gbe soke.
Ifihan IN THE AVILOO WEBAPP

Imọlẹ ofeefee: Idanwo ni ilọsiwaju.
Ti pupa ba tan imọlẹ: Idanwo FLASH kuna (wo awọn akọsilẹ ni isale ọtun).

Imọlẹ alawọ ewe: Gbigbe data.
Imọlẹ alawọ ewe: Idanwo ti pari.
AKIYESI PATAKI · Lati jẹ ki sọfitiwia di imudojuiwọn,
fi apoti silẹ sinu ipese agbara nigbati ko si ni lilo. · Red LED tumo si: FLASH Idanwo kuna.

Ṣe awọn igbese wọnyi:
1. Ṣayẹwo ni https://aviloo.link/database boya ọkọ le ṣe idanwo.
2. Tun idanwo FLASH ṣe gẹgẹbi awọn ilana.
3. Kan si AVILOO Onibara Management.

ẸSẸ 07/25

Awọn iwe aṣẹ / Awọn orisun

AVILOO Flash Test [pdf] Ilana itọnisọna
Flash Test, Test

Awọn itọkasi

Fi ọrọìwòye

Adirẹsi imeeli rẹ kii yoo ṣe atẹjade. Awọn aaye ti a beere ti wa ni samisi *