Alaye pataki
This Aleshon Pulse Oximeter is designed for non-medical use by healthy individuals to monitor their pulse rate and blood oxygen levels. It is intended for sports and aviation use only. It is not a medical device and should not be used to diagnose or treat any medical condition or disease.
Jọ̀wọ́ ka ìwé ìtọ́ni yìí dáadáa kí o tó lo ẹ̀rọ náà láti rí i dájú pé ó ní ààbò àti pé ó tọ́ láti ṣiṣẹ́.
Ọja Pariview
The Aleshon Pulse Oximeter Model 333 features a 4-color TFT display for clear readings of blood oxygen saturation (SpO2), pulse rate (PRbpm), and perfusion index (PI%). Its compact design and comfortable material ensure ease of use.
Image: The Aleshon Pulse Oximeter Model 333, showing its 4-color TFT display with readings for SpO2, PRbpm, and PI%. The device is white and silver with a power button.
Package Awọn akoonu
- Pulse Oximeter (Model 333)
- Lanyard
- Itọsọna olumulo
Image: A hand holding the retail packaging for the Pulse Oximeter. The box is white with minimal branding and shows a small image of the device.
Ṣeto
- Fifi sori batiri: Open the battery compartment cover on the back of the device. Insert two AAA batteries, ensuring correct polarity (+/-). Close the battery compartment cover securely.
- Asomọ Lanyard: Thread the lanyard through the loop hole on the device. This helps prevent accidental drops.
Image: The Aleshon Pulse Oximeter with a lanyard attached, demonstrating how the lanyard can be used for portability and security.
Awọn ilana Iṣiṣẹ
- Agbara Tan: Tẹ bọtini agbara lati tan ẹrọ naa.
- Gbígbé Ìka: Ṣii clamp and place one of your fingers (preferably the index or middle finger) into the rubber opening of the oximeter, ensuring your nail is facing upwards towards the display.
- Iwọn: Tu clamp. Keep your hand still during the measurement. The device will automatically begin measuring your blood oxygen saturation and pulse rate.
- Awọn abajade kika: The readings for SpO2, PRbpm, and PI% will appear on the TFT display within a few seconds.
- Agbara Pa: The device will automatically power off after approximately 8 seconds of inactivity or when the finger is removed. You can also press and hold the power button to manually turn it off.
Akiyesi: For accurate readings, ensure your finger is clean, dry, and free of nail polish. Avoid excessive movement during measurement.
Itoju
- Ninu: Lo asọ asọ dampened with a mild disinfectant (e.g., 70% isopropyl alcohol) to clean the surface of the oximeter before and after each use. Do not immerse the device in liquid.
- Ibi ipamọ: Tọju ẹrọ naa ni itura, aye gbigbẹ, kuro lati orun taara, awọn iwọn otutu ti o ga, ati ọriniinitutu.
- Rirọpo Batiri: Replace batteries when the low battery indicator appears on the display. Remove batteries if the device will not be used for an extended period to prevent leakage.
Laasigbotitusita
| Isoro | Owun to le Idi | Ojutu |
|---|---|---|
| No display after pressing power button. | Awọn batiri ti lọ silẹ tabi ti fi sori ẹrọ ti ko tọ. | Rọpo awọn batiri tabi rii daju polarity ti o pe. |
| Awọn kika ti ko pe tabi riru. | Finger not properly inserted; excessive movement; cold fingers; nail polish. | Re-insert finger correctly; remain still; warm hands; remove nail polish. |
| "Finger Out" or similar error message. | Finger not detected or removed. | Ensure finger is fully inserted and device is properly clamped. |
Awọn pato
- Awoṣe: 333
- Iru ifihan: 4-Color TFT Display
- Blood Oxygen Saturation (SpO2) Measuring Range: 70-100%
- Pulse Rate (PRbpm) Measuring Range: 25-250 bpm
- Àtọ́ka Ìfọ́pọ̀ (PI%): 0.1-20%
- Lilo Agbara: O kere ju 30mA
- Ibeere agbara: Two AAA 1.5V alkaline batteries
- Iwọn Iṣiṣẹ: 5°C si 40°C (41°F si 104°F)
- Ibi ipamọ otutu: -20°C si 55°C (-4°F si 131°F)
- Ọriniinitutu ti nṣiṣẹ: 15% to 80% ti kii-condensing
- Awọn iwọn: Approximately 0.39 x 0.39 x 0.39 inches (Package Dimensions, actual device size will be similar)
- Ìwúwo: Approximately 0.04 ounces (excluding batteries)
- Olupese: Shenzhen Yuezhongxing Technology Co.,Ltd
- UPC: 704505602973
Image: A close-up of the product packaging, highlighting key features and specifications such as compact size, high accuracy, digital technology, and ease of operation.
Alaye ilana
The manufacturer, Shenzhen Yuezhongxing Technology Co.,Ltd, is registered with the U.S. Food & Drug Administration (FDA) for this device. This registration indicates compliance with regulatory requirements for medical devices, though this specific product is marketed for non-medical, sports, and aviation use.
Image: A screenshot of the U.S. FDA Establishment Registration & Device Listing page, showing "Shenzhen Yuezhongxing Technology Co.,Ltd" as the manufacturer for "Aleshon Finger Oximeter Model 333".
Olubasọrọ ati Support
For further assistance or inquiries, please refer to the contact information provided with your purchase or visit the Aleshon store online.
Ile itaja ori ayelujara: Aleshon Store on Amazon