111 KWE-TM02 Digital Electronic Timer Socket Instruction Manual

1. Ifihan

The 111 KWE-TM02 Digital Electronic Timer Socket is designed to automatically control the power supply to various electrical appliances. This device allows you to set specific ON/OFF times over a 7-day period, providing convenience and energy efficiency for household or office equipment such as lighting, heating, or other electronics. Its plug-in design and clear LCD display make it user-friendly for programming and operation.

2. Alaye Aabo

• Ensure the timer is correctly plugged into a suitable power outlet (230V, 50Hz).
• Do not exceed the maximum load capacity of 16A / 3680W. Overloading can cause damage to the device or connected appliances and poses a fire risk.
• Do not immerse the timer in water or expose it to excessive moisture.
• Ma ṣe gbiyanju lati ṣii tabi tun ẹrọ naa ṣe. Tọkasi gbogbo iṣẹ si oṣiṣẹ oṣiṣẹ.
• Jeki kuro ni arọwọto awọn ọmọde.
• Ensure the appliance connected to the timer is in good working condition and suitable for automatic operation.

3. Awọn ẹya Ọja

• Ifihan LCD nla: Provides clear and easy-to-read time and program settings.
• Agbara fifuye giga: Supports up to 16A / 3680W, suitable for various appliances.
• Apẹrẹ ohun itanna: Fifi sori ẹrọ rọrun ati irọrun.
• Key-based Timer Function: Intuitive buttons for setting time and programs.
• Comprehensive Time Setting: Allows programming by hour, minute, and week.
• Summer & Winter Time Mode: Easily adjust for daylight saving changes.
• Random Function: Provides security by varying ON/OFF times within a set period.
• Ipo Wakati 12/24: Yan ọna kika ifihan akoko ti o fẹ.
• Batiri Atungba Ijọpọ: N tọju awọn eto lakoko agbara outages.
• Yiye giga: Features a CMOS chip for precise timing and strong anti-jamming capabilities.

4. Package Awọn akoonu

Ni ṣiṣi package, jọwọ rii daju pe gbogbo awọn nkan wa ati ni ipo to dara:

• 1 x KWE-TM02 Digital Timer Socket (EU, US, UK, or AU plug type, as purchased)
• 1 x Afowoyi Itọsọna Gẹẹsi

5. Eto

5.1 Initial Power-Up and Battery Charging

The timer socket contains a built-in rechargeable NiMH 1.2V battery. Before first use, plug the timer into a live power outlet for approximately 4 hours to ensure the internal battery is fully charged. This battery retains your programmed settings during power interruptions.

5.2 Ṣíṣeto Àkókò Lọ́wọ́lọ́wọ́

1. Tẹ awọn Aago button once. The display will show the current time.
2. Nigba dani awọn Aago bọtini, tẹ awọn OSE bọ́tìnì leralera láti ṣètò ọjọ́ ìsinsìnyí ti ọ̀sẹ̀.
3. Nigba dani awọn Aago bọtini, tẹ awọn WAKATI button repeatedly to set the current hour.
4. Nigba dani awọn Aago bọtini, tẹ awọn ISEJU bọ́tìnì leralera láti ṣètò ìṣẹ́jú tó wà lọ́wọ́lọ́wọ́.
5. Tu silẹ Aago Bọ́tìnì náà. Àkókò náà ti wà nílẹ̀ báyìí.

5.3 12/24 Hour Mode Selection

Láti yípadà láàrín àwọn ọ̀nà ìgbàlódé wákàtí méjìlá (AM/PM) àti wákàtí mẹ́rìnlélógún (24), tẹ ẹ̀rọ náà. Aago bọtini ati awọn Aago bọtini ni nigbakannaa.

5.4 Summer/Winter Time Adjustment

To activate or deactivate the Summer/Winter time function, press the Aago bọtini ati awọn TAN/Afọwọṣe/PA button simultaneously. The display will indicate when Summer time is active.

olusin 1: Iwaju view of the KWE-TM02 Digital Electronic Timer Socket, showing the LCD display, control buttons (WEEK, HOUR, MINUTE, RES/RCL, CLOCK, TIMER, ON/AUTO/OFF, RANDOM), and the power outlet.

6. Awọn ilana Iṣiṣẹ

6.1 Programming ON/OFF Times

Aago naa gba laaye fun ọpọlọpọ awọn eto ON/OFF. Tẹle awọn igbesẹ wọnyi lati ṣeto eto kan:

1. Tẹ awọn Aago button. The display will show '1 ON' indicating the first ON program setting.
2. Tẹ awọn OSE button to select the day(s) for this program. Options include individual days, weekdays, weekends, or all 7 days.
3. Tẹ awọn WAKATI button to set the desired hour for the 'ON' time.
4. Tẹ awọn ISEJU button to set the desired minute for the 'ON' time.
5. Tẹ awọn Aago button again. The display will show '1 OFF' for the first OFF program setting.
6. Tun awọn igbesẹ 2-4 ṣe lati ṣeto ọjọ (awọn), wakati, ati iṣẹju fun akoko 'PA'.
7. Tẹsiwaju titẹ awọn Aago button to cycle through and set additional ON/OFF programs (e.g., '2 ON', '2 OFF', etc.).
8. Once all desired programs are set, press the Aago bọtini lati pada si awọn ti isiyi akoko àpapọ.

6.2 Activating Programs (ON/AUTO/OFF Mode)

After programming, you need to select the operating mode:

• Tẹ awọn TAN/Afọwọṣe/PA button repeatedly to cycle through the modes:
• LATI: Àkókò tí a fi ń ṣe àkójọ náà máa ń ṣiṣẹ́ nígbà gbogbo, láìka gbogbo ètò sí.
• PA: Àkójọ àkókò náà máa ń pa nígbà gbogbo, láìka gbogbo ètò sí.
• LATIO: The timer operates according to the programmed ON/OFF times. Ensure the timer is in AUTO mode for your programs to function.

6.3 Using the Random Function

The random function can be used to deter intruders by making it appear as if someone is home. When activated, the timer will randomly turn ON or OFF within a specified time window (e.g., 10-30 minutes before or after a programmed time).

• To activate the random function, press the ID button. The display will show 'R' or 'RANDOM'.
• Lati mu maṣiṣẹ, tẹ bọtini naa ID bọtini lẹẹkansi.

6.4 Resetting Programs (RES/RCL)

To clear a specific program or recall a deleted program:

• While in program setting mode (after pressing Aago), navigate to the program you wish to clear.
• Tẹ awọn RES/RCL button. This will clear the current ON or OFF setting.
• Titẹ RES/RCL again will recall the last cleared setting.

Figure 2: The KWE-TM02 timer socket, emphasizing its large LCD display for easy reading and the array of keys for timer functions.

7. Itọju

7.1 Ninu

To clean the timer socket, first unplug it from the power outlet. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners, abrasive materials, or solvents, as these can damage the device.

7.2 batiri Alaye

The KWE-TM02 features a built-in, non-removable NiMH 1.2V rechargeable battery. This battery is designed to maintain your settings for over 100 hours during power outages. If the timer is stored for extended periods without power, the battery may discharge. Reconnect it to a power outlet for several hours to recharge.

8. Laasigbotitusita

• Ifihan ti ṣofo tabi baibai: Ensure the timer is plugged into a live power outlet. The internal battery might be depleted; allow it to charge for a few hours.
• Programs are not activating: Check that the timer is set to AUTO mode. Verify that the current time and programmed times are set correctly.
• Device not responding to button presses: The timer may require a full reset. Locate the small Tunto pinhole (usually next to the RANDOM button) and use a pointed object (like a paperclip) to press the internal button. This will clear all settings and require reprogramming.
• Appliance not turning ON/OFF: Ensure the appliance is correctly plugged into the timer socket and is functioning independently. Check the timer's load capacity is not exceeded.

Figure 3: The timer socket displaying '000 AUTO', indicating it is in automatic mode with no specific program number active.

9. Awọn pato

Figure 4: Dimensions of the KWE-TM02 Digital Electronic Timer Socket.

Figure 5: Detail of the EU plug type for the KWE-TM02 timer socket.

Figure 6: Various plug types available for the KWE-TM02 timer socket, including EU, AU, US, and UK.

10. Atilẹyin ọja ati Support

This product is covered by a standard manufacturer's warranty. For specific warranty terms, please refer to the documentation provided at the time of purchase or contact your retailer. For technical support, troubleshooting assistance, or inquiries regarding product functionality, please contact the seller or manufacturer directly through their official support channels.