DIRECTV Universal Remote Control RC65 User Manual

Ọrọ Iṣaaju

This manual provides instructions for the setup, operation, and maintenance of your DIRECTV Universal Remote Control, model RC65. This remote is designed to operate your DIRECTV receiver and can be programmed to control other audio/video devices such as televisions and sound systems.

Please read this manual thoroughly before using your remote control to ensure proper functionality and to maximize your viewiriri iriri.

Ọja Pariview

Aworan: Iwaju view of the DIRECTV Universal Remote Control RC65. This image displays the remote's ergonomic design and the layout of its primary control buttons, including the directional pad, channel and volume controls, and various function keys. The remote is black with white button labels.

The DIRECTV RC65 remote control is a universal remote capable of controlling multiple devices. Its design focuses on ease of use and compatibility with a wide range of audio/video equipment.

Ṣeto

1. Fifi sori batiri

1. Wa yara batiri ni ẹhin isakoṣo latọna jijin.
2. Press down on the tab and slide the battery cover off.
3. Fi awọn batiri AA meji (2) sii, ki o rii daju pe awọn ebute rere (+) ati odi (-) ba awọn ami inu yara naa mu.
4. Gbe ideri batiri pada si aaye titi yoo fi tẹ ni aabo.

Akiyesi: Awọn batiri ko si pẹlu isakoṣo latọna jijin.

2. Programming for DIRECTV Receiver

The remote is typically pre-programmed to operate your DIRECTV receiver. If it does not work, or if you are setting up a new remote, follow these steps:

1. Tọ́ka sí ibi tí a ti ń lo remote DIRECTV rẹ.
2. Tẹ mọlẹ IKU ati Yan awọn bọtini ni akoko kanna titi ti ina alawọ ewe ti o wa ni oke latọna jijin naa yoo fi tàn lẹẹmeji.
3. Tẹ koodu sii 961Ina alawọ ewe naa yoo tan imọlẹ lẹẹmeji.
4. Tẹ awọn CHANNEL UP Bọ́tìnì náà. Ìmọ́lẹ̀ aláwọ̀ ewé yóò máa tàn lẹ́ẹ̀mejì.
5. Tẹ awọn Yan Bọ́tìnì náà. Ìmọ́lẹ̀ aláwọ̀ ewé yóò máa tàn lẹ́ẹ̀mejì.
6. Test the remote by changing channels or adjusting volume.

3. Programming for Other Devices (TV, Audio)

To program the remote to control your television or other audio/video devices, you will need the device's brand code. Refer to the code list provided with your DIRECTV system or search online for "DIRECTV remote codes [your device brand]".

1. Tan ẹrọ ti o fẹ lati ṣe eto rẹ (fun apẹẹrẹ, TV rẹ).
2. Tẹ mọlẹ IKU ati Yan awọn bọtini ni akoko kanna titi ti ina alawọ ewe ti o wa ni oke latọna jijin naa yoo fi tàn lẹẹmeji.
3. Press the mode button for the device you are programming (e.g., TV fún tẹlifíṣọ̀n, AV1 or AV2 for audio/video devices). The green light will flash once.
4. Enter the 5-digit code for your device's brand. The green light will flash twice if the code is accepted.
5. Tọka awọn isakoṣo latọna jijin ni ẹrọ ki o si tẹ awọn AGBARA bọtini. Ti ẹrọ naa ba wa ni pipa, siseto naa ṣaṣeyọri.
6. If the device does not turn off, repeat steps 1-5 with another code for your device's brand.

Tip: If you cannot find a code, try the "Code Search" method: After step 3, instead of entering a code, press CHANNEL UP repeatedly until the device turns off, then press Yan.

Awọn ilana Iṣiṣẹ

The DIRECTV RC65 remote control features a standard layout for easy navigation and control of your entertainment system.

• MODE Buttons (DIRECTV, TV, AV1, AV2): Select the device you want to control. Press the corresponding button before issuing commands for that device.
• AGBARA: Tan ẹrọ ti o yan tan tabi pa.
• Iwọn didun soke/isalẹ: Adjusts the volume of the selected audio device (usually TV or AV receiver).
• IKANNI SỌKA/SỌKALẸ̀: Changes channels on the DIRECTV receiver.
• DÁKÚN: Mu ohun naa mu tabi mu ohun kuro.
• Itọnisọna: Displays the DIRECTV program guide.
• Akojọ: Accesses the DIRECTV system menu.
• SELECT/OK: Jẹrisi awọn aṣayan tabi tẹ awọn akojọ aṣayan sii.
• ARROW Buttons (UP, DOWN, LEFT, RIGHT): Lọ kiri nipasẹ awọn akojọ aṣayan ati awọn itọsọna.
• AKIYESI: Records the current program on your DIRECTV DVR.
• PLAY, PAUSE, STOP, REW, FF, SKIP: Control playback of recorded content or live TV (with DVR).
• ALAYE: Ṣe afihan alaye nipa eto lọwọlọwọ.
• JADE: Awọn akojọ aṣayan tabi awọn itọsọna jade.

Note: Specific button functions may vary slightly depending on your DIRECTV receiver model and programmed devices.

Itoju

Nu latọna jijin mọ

• Use a soft, dry cloth to wipe the surface of the remote control.
• Fun idoti alagidi, die-die dampen asọ pẹlu omi tabi a ìwọnba, ti kii-abrasive regede. Maṣe fun sokiri regede taara si isakoṣo latọna jijin.
• Yẹra fún lílo àwọn kẹ́míkà líle, àwọn ohun olómi, tàbí àwọn ohun ìfọmọ́ tí ó lè fa ìfọ́, nítorí pé wọ́n lè ba ìparí tàbí àwọn ohun èlò inú remote náà jẹ́.

Batiri Rirọpo

Replace batteries when the remote's response becomes sluggish or if the green light at the top does not flash when a button is pressed. Refer to the "Battery Installation" section under Setup for detailed instructions.

• Nigbagbogbo paarọ awọn batiri mejeeji ni akoko kanna.
• Use new AA alkaline batteries for optimal performance.
• Sọ awọn batiri atijọ kuro ni ibamu si awọn ilana agbegbe.

Laasigbotitusita

Latọna jijin Ko Dahun

• Ṣayẹwo awọn batiri: Rii daju pe a ti fi awọn batiri sii daradara ati pe ko dinku. Rọpo ti o ba wulo.
• Laini Oju: Make sure there are no obstructions between the remote and the device you are trying to control. The remote uses infrared (IR) signals, which require a clear line of sight.
• Ipo titọ: Verify that the correct mode button (DIRECTV, TV, AV1, AV2) is pressed for the device you intend to control.
• Atunto Latọna jijin: Remove batteries, press all buttons a few times to discharge any residual power, then reinsert batteries.

Device Not Responding After Programming

• Verify Code: Double-check that you entered the correct 5-digit code for your device's brand. Try other codes listed for your brand.
• Ṣiṣawari koodu: Attempt the "Code Search" method described in the "Programming for Other Devices" section.
• Ibamu Ẹrọ: While the remote has an extensive code library, some older or very new devices may not be fully compatible.

Volume/Channel Control Issues

• Titiipa iwọn didun: Ensure the volume is not locked to the DIRECTV receiver if you want to control the TV volume. To unlock, press and hold IKU ati Yan until the green light flashes twice, then enter 993. Tẹ Yan.
• Iṣakoso ikanni: Ensure the remote is in DIRECTV mode to change channels on the receiver.

Awọn pato

Alaye atilẹyin ọja

This DIRECTV Universal Remote Control (Model RC65) comes with a limited warranty against defects in materials and workmanship under normal use. The warranty period typically covers 90 days from the date of purchase. Please retain your proof of purchase for warranty claims.

This warranty does not cover damage caused by misuse, accident, unauthorized modification, or use with non-DIRECTV approved accessories. For specific warranty terms and conditions, please refer to the documentation included with your DIRECTV system or visit the official DIRECTV support webojula.

Onibara Support

If you require further assistance with your DIRECTV Universal Remote Control, please contact DIRECTV customer support:

• Atilẹyin Ayelujara: Ṣabẹwo si atilẹyin DIRECTV osise website for FAQs, troubleshooting guides, and programming code lists.
• Atilẹyin foonu: Refer to your DIRECTV service agreement or bill for the most current customer service phone number.

When contacting support, please have your DIRECTV account information and the remote control model number (RC65) ready.