Progress Lighting 2-Light Flush Mount Ceiling Light Fixture User Manual

1. Ifihan

This manual provides comprehensive instructions for the safe installation, operation, and maintenance of your Progress Lighting 2-Light Flush Mount Ceiling Light Fixture, Model P3925-09. This fixture is designed to provide ambient illumination in various interior spaces such as kitchens, hallways, bedrooms, and living rooms. Please read all instructions carefully before beginning installation.

Figure 1: Progress Lighting 2-Light Flush Mount Ceiling Light Fixture (Model P3925-09)

2. Alaye Aabo pataki

Láti dín ewu iná, ìkọlù iná mànàmáná, tàbí ìpalára ara ẹni kù, máa tẹ̀lé àwọn ìlànà ààbò wọ̀nyí nígbà gbogbo:

• IKILO: Turn off electrical power at the circuit breaker or fuse box before installing or servicing the fixture.
• All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC). Consult a qualified electrician if you are unfamiliar with proper electrical wiring installations.
• A ṣe apẹrẹ ẹrọ yii fun lilo inu ile nikan.
• Do not install this fixture in wet locations. It is cCSAus damp-location listed, suitable for damp environments like bathrooms or covered porches, but not direct water exposure.
• Always use bulbs of the correct wattage and type as specified in the product specifications.
• Mu awọn paati gilasi mu pẹlu itọju lati yago fun fifọ.
• Ilana 65 Ikilọ: Ọja yii le ni awọn kẹmika ti a mọ si Ipinle California lati fa aarun ati awọn abawọn ibimọ tabi ipalara ibisi miiran.

3. Package Awọn akoonu

Verify that all components listed below are present and undamaged before proceeding with installation. If any parts are missing or damaged, do not attempt to assemble or install the fixture. Contact customer support for assistance.

Figure 2: Diagram of fixture components and assembly steps.

Awọn eroja to wa:

• Mounting strap for outlet box
• Àwọn ohun èlò ìsopọ̀mọ́ra (àwọn skru, àwọn èèpo wáyà)
• Fixture body with pre-wired electrical leads
• Alabaster glass dome shade
• Decorative finial
• Awọn ilana fifi sori dì

Akiyesi: Awọn gilobu ina ko si ati pe o gbọdọ ra lọtọ.

4. Awọn ilana fifi sori ẹrọ

Follow these steps to install your ceiling light fixture. It is recommended to have a second person assist during installation to ensure safety and ease of handling.

1. Pa Agbara: Before starting, ensure the electrical power to the junction box is turned off at the main circuit breaker or fuse box.
2. Múra Sísopọ̀: Attach the mounting strap to the outlet box using the provided screws. Ensure the mounting strap is securely fastened.
3. Awọn isopọ Waya: Carefully connect the fixture's electrical wires to the corresponding house wires using the provided wire nuts.
   • Connect the black wire from the fixture to the black (hot) wire from the outlet box.
   • Connect the white wire from the fixture to the white (neutral) wire from the outlet box.
   • Connect the copper ground wire from the fixture to the green or bare copper ground wire from the outlet box.
   Rii daju pe gbogbo awọn asopọ wa ni aabo.
4. Mount Fixture Body: Carefully tuck the wires into the outlet box. Align the fixture body with the mounting strap and secure it using the provided screws.
5. Fi Awọn Isusu Imọlẹ sori ẹrọ: Screw two 75-watt maximum, medium base (E26) bulbs or LED equivalents (sold separately) into the sockets.
6. So iboji gilasi: Place the alabaster glass dome shade onto the fixture body. Secure it with the decorative finial by screwing it onto the threaded rod at the bottom of the fixture. Do not overtighten.
7. Pada Agbara pada: Once installation is complete, turn the electrical power back on at the circuit breaker or fuse box.

Figure 3: Detailed installation sheet for Model P3925-09.

5. Operating Your Light Fixture

This fixture operates like a standard ceiling light. Once installed and power is restored, it can be controlled via a wall switch (not included).

• Tan/Pa: Lo àyípadà ògiri tí a so pọ̀ mọ́ra láti tan tàbí pa ohun èlò iná náà.
• Dimming: If using dimmable bulbs and a compatible dimmer switch (both sold separately), you can adjust the light intensity to create your desired ambiance.

6. Itọju

Ìtọ́jú déédéé yóò ran ọ́ lọ́wọ́ láti pa ìrísí àti iṣẹ́ àwọn ohun èlò ìmọ́lẹ̀ rẹ mọ́.

• Ninu: To clean the fixture, turn off the power and allow it to cool. Wipe the metal parts with a soft, dry cloth. Clean the glass shade with a mild glass cleaner and a soft cloth. Avoid abrasive cleaners or pads, as they may damage the finish.
• Rirọpo Boolubu:
  1. Pa agbara si ohun elo naa ni fifọ Circuit.
  2. Carefully unscrew the decorative finial at the bottom of the glass shade.
  3. Remove the glass shade.
  4. Unscrew the old bulbs and replace them with new 75-watt maximum, medium base (E26) bulbs or LED equivalents.
  5. Reattach the glass shade and secure it with the decorative finial.
  6. Mu agbara pada si imuduro.

7. Laasigbotitusita

If your fixture is not operating correctly, refer to the following table for common issues and solutions:

8. Awọn alaye ọja

Figure 4: Dimensional drawing of the fixture, showing 13-1/4" diameter and 5-7/8" height.

olusin 5: Isunmọ view of the brushed nickel finial at the base of the glass shade.

olusin 6: Isunmọ view of the brushed nickel rim of the fixture.

9. atilẹyin ọja Information

This Progress Lighting fixture is backed by a 1-odun lopin atilẹyin ọja. This warranty covers defects in materials and workmanship under normal use and service. For specific terms and conditions, please refer to the warranty documentation included with your product or contact Progress Lighting customer support.

10. Onibara Support

For further assistance, technical support, or to inquire about replacement parts, please visit the official Progress Lighting store or contact their customer service department.

Progress Lighting Store: Ṣabẹwo Ile-itaja