Progress Lighting P5821-20 1-Light Compact Fluorescent Wall Lantern

1. Ọja Ipariview

The Progress Lighting P5821-20 is a 1-light energy-efficient compact fluorescent wall lantern designed for outdoor use. It features a transitional styling with an antique bronze finish and a matte white acrylic diffuser. This fixture is rated for use in wet locations and complies with California Title-24 requirements, making it suitable for porches, patios, and other exterior wall applications.

This image shows the Progress Lighting P5821-20 1-Light Energy Efficient Compact Fluorescent Wall Lantern in an antique bronze finish, featuring a classic design with a matte white acrylic diffuser.

2. Alaye Aabo

• IKILO: Disconnect power at the circuit breaker or fuse box before installation or servicing.
• Gbogbo asopọ ina gbọdọ wa ni ibamu pẹlu awọn koodu agbegbe, awọn ilana, tabi Koodu Ina Orilẹ-ede (NEC). Kan si oniṣẹ ina ti o peye ti o ba jẹ pe o ko mọ awọn asopọ ina to tọ.
• This product may be subject to California Proposition 65 rules and regulations. For more information, visit www.P65Warnings.ca.gov.
• Do not install this fixture in areas where it may be submerged in water. While rated for wet locations, it is not designed for submersion.

3. Package Awọn akoonu

Daju pe gbogbo awọn paati wa ṣaaju ki o to bẹrẹ fifi sori:

• 1-Light Wall Lantern (P5821-20)
• Matte White Acrylic Diffuser
• Ile gaungaun Aluminiomu
• Mounting Hardware (typically includes mounting strap, screws, wire nuts)
• Akiyesi: A compact fluorescent light source (bulb) is ko si ati ki o gbọdọ wa ni ra lọtọ.

4. Eto ati fifi sori

Awọn irinṣẹ ti a beere: Awakọ ìdènà, àwọn ohun èlò tí a fi ń ya wáyà, tẹ́ẹ̀pù iná mànàmáná, àwọn gíláàsì ààbò.

1. Pa Agbara: Before starting, ensure the power to the installation area is completely off at the circuit breaker or fuse box.
2. Mura Waya: Carefully remove the existing fixture (if any) and expose the electrical wires from the junction box.
3. So okun fifi sori ẹrọ mọ: Secure the provided mounting strap to the junction box using the screws.
4. Ṣe Awọn Isopọ Itanna: Connect the fixture's wires to the house wires according to local electrical codes. Typically, connect black to black (live), white to white (neutral), and bare copper or green to bare copper or green (ground). Secure connections with wire nuts and electrical tape.
5. Òkè Ńlá: Carefully tuck the wires into the junction box and align the fixture with the mounting strap. Secure the fixture to the mounting strap using the provided screws.
6. Fi Orisun Imọlẹ sori ẹrọ: Insert a compatible compact fluorescent bulb (not included) into the fixture's socket. Refer to the specifications for the correct wattage.
7. Pada Agbara pada: Nígbà tí a bá ti parí ìfìsílẹ̀ àti gbogbo ìsopọ̀mọ́ra, dá agbára padà sí ibi tí ẹ̀rọ ìfọ́mọ́ra náà ti ń ṣiṣẹ́.

Pataki: Ti o ko ba ni idaniloju nipa eyikeyi apakan ti ilana fifi sori ẹrọ, kan si onisẹ ina mọnamọna ti o peye.

5. Awọn ilana Iṣiṣẹ

This wall lantern operates via a standard wall switch connected to its electrical circuit. Once installed and powered, simply toggle the wall switch to turn the light on or off.

• Orisun Imọlẹ Imọlẹ: Iwapọ Fuluorisenti
• O pọju Wattage: 13 Wattis

6. Itọju

• Ninu: Láti nu ohun èlò ìṣiṣẹ́ náà, rí i dájú pé agbára náà ti pa. Fi aṣọ rírọ, d nu ún.amp cloth. Do not use abrasive cleaners or solvents, as they may damage the finish or acrylic diffuser.
• Rirọpo Boolubu: Ensure power is off before replacing the bulb. Allow the old bulb to cool completely before removal. Replace with a new compact fluorescent bulb of the same type and wattage (13 Watts maximum).
• Ayewo: Máa ṣe àyẹ̀wò ẹ̀rọ náà lẹ́ẹ̀kọ̀ọ̀kan fún àmì ìbàjẹ́, ìbàjẹ́, tàbí àwọn ìsopọ̀ tí ó bàjẹ́. Tún ṣe àtúnṣe sí èyíkéyìí ìṣòro kíákíá.

7. Laasigbotitusita

If the wall lantern does not operate correctly, perform the following checks:

• Ko si Imọlẹ:
  • Rí i dájú pé ìyípadà ògiri wà ní ipò 'ON'.
  • Check the circuit breaker or fuse for the fixture's circuit. Reset if tripped or replace fuse if blown.
  • Verify the light bulb is securely screwed in and is not burnt out. Replace if necessary.
  • Confirm that all electrical connections are secure and properly wired. (IKILO: Turn off power before checking wiring.)
• Imọlẹ didan:
  • Check for a loose bulb or loose wiring connections.
  • Ensure the bulb is the correct type and wattage fun imuduro.

If issues persist after performing these checks, consult a qualified electrician.

8. Awọn pato

This image illustrates the dimensions of the P5821-20 wall lantern, measuring 8.75 inches in height, 7.25 inches in length, and 5.75 inches in width.

9. Atilẹyin ọja ati Support

This Progress Lighting product is covered by a 1-odun atilẹyin ọja from the date of purchase. For detailed warranty information, please refer to the official warranty document provided by Progress Lighting, which can typically be found on their website or via the link: https://hubbellcdn.com/warranty/prog_93049973_d_warranty.pdf.

For technical support, replacement parts, or further assistance, please contact Progress Lighting directly. Contact information can usually be found on the manufacturer's webaaye tabi lori apoti ọja.