Progress Lighting P3689-44 Two-Light Close-to-Ceiling Fixture Instruction Manual

Ọrọ Iṣaaju

This manual provides detailed instructions for the safe installation, operation, and maintenance of your Progress Lighting P3689-44 Two-Light Close-to-Ceiling Fixture. Please read all instructions carefully before beginning installation and retain this manual for future reference.

The P3689-44 fixture features a clean design with elegant lines, complemented by a satin Oxford Silver finish and an etched alabaster style glass shade. Its unique twist-lock shade design allows for easy access for changing light bulbs without external hardware.

Alaye Aabo

IKILO: Ewu ìkọlù iná mànàmáná. Yọ agbára kúrò ní àpótí fiusi tàbí ẹ̀rọ ìfọ́mọ́ra kí o tó fi sori ẹrọ tàbí ṣe àtúnṣe.

IKIRA: For your safety, read and understand the information provided in this manual completely before attempting to assemble, install, or operate this product. Failure to do so could lead to electric shock, fire, or other injuries that could be hazardous or even fatal.

• Gbogbo asopọ ina gbọdọ wa ni ibamu pẹlu awọn koodu agbegbe, awọn ilana, tabi Koodu Ina Orilẹ-ede (NEC).
• Kan si alagbawo ina mọnamọna ti o pe ti o ko ba ni idaniloju nipa awọn ilana onirin.
• Use only UL/cUL listed wire connectors.
• Maṣe kọja wat ti o pọjutage pato fun awọn Isusu.
• Rí i dájú pé a so ohun èlò náà mọ́ ara ẹ̀rọ tó wà lórí àjà ilé náà dáadáa.

Package Awọn akoonu

Carefully unpack your fixture and check that all parts are included. If any parts are missing or damaged, contact Progress Lighting customer service before proceeding.

• Ara imuduro (1)
• Ojiji gilasi (1)
• Ohun elo ohun elo iṣagbesori (1)
• Ilana itọnisọna (1)

Eto ati fifi sori

Awọn irinṣẹ ti a beere (Ko si):

• Phillips dabaru
• screwdriver Flathead
• Waya strippers
• Itanna teepu
• Awọn gilaasi aabo

Awọn igbesẹ fifi sori ẹrọ:

1. Pa agbara: Kí o tó bẹ̀rẹ̀ sí í fi sori ẹ̀rọ, rí i dájú pé agbára sí ẹ̀rọ náà ti pa ní àpótí fiusi tàbí ẹ̀rọ ìfọ́mọ́ra.
2. Prepare mounting: Attach the mounting bracket to the junction box in the ceiling using the screws provided in the hardware kit. Ensure the bracket is securely fastened.
3. Asopọmọra: So awọn okun waya ohun elo naa pọ mọ awọn okun waya ile ni ibamu si awọn atẹle yii:
   • Sopọ awọn dudu imuduro waya si awọn dudu (gbóná) wáyà ilé.
   • Sopọ awọn funfun imuduro waya si awọn funfun (didoju) waya ile.
   • Sopọ awọn igboro Ejò (ground) fixture wire to the Ejò aláwọ̀ ewé tàbí bàbà lásán (ground) house wire.
   Secure all connections with wire connectors and wrap with electrical tape for added safety.
4. Mount fixture body: Carefully push the wired fixture body up to the ceiling, aligning the screw holes on the fixture with the screws on the mounting bracket. Secure the fixture body in place with the decorative nuts or screws provided.
5. Fi sori ẹrọ awọn bulbs: Insert two (2) 60-watt maximum medium base bulbs (not included) into the sockets. Do not exceed the recommended wattage.
6. Attach glass shade: Align the glass shade with the fixture body and twist it clockwise until it locks securely into place. The unique twist-lock design ensures the shade is held firmly without visible hardware.

Image: The Progress Lighting P3689-44 Two-Light Close-to-Ceiling Fixture, showcasing its Oxford Silver finish and etched alabaster style glass shade. The fixture is designed for flush mounting to the ceiling.

Awọn ilana Iṣiṣẹ

Once the fixture is fully installed and bulbs are in place, restore power at the main fuse box or circuit breaker. The fixture is operated via a standard wall switch (not included) connected to the circuit.

• Rii daju pe wat ti o tọtage bulbs (max 60-watt medium base) are used to prevent overheating or damage.
• The fixture is designed for indoor use in dry locations only.

Itoju

Ninu:

To clean the fixture, ensure power is turned off. Wipe the fixture with a soft, dry cloth. Do not use abrasive cleaners, polishes, or solvents as they may damage the finish or glass. For the glass shade, a mild glass cleaner can be used sparingly on a cloth, then wiped dry.

Rirọpo Boolubu:

To replace bulbs, turn off power at the circuit breaker. Gently twist the glass shade counter-clockwise to remove it. Unscrew the old bulbs and replace them with new 60-watt maximum medium base bulbs. Reattach the glass shade by twisting it clockwise until secure.

Laasigbotitusita

Awọn pato

Atilẹyin ọja ati Support

This Progress Lighting fixture is covered by a 1-odun olupese ká atilẹyin ọja lati ọjọ ti o ra. Atilẹyin ọja yi ni wiwa awọn abawọn ninu awọn ohun elo ati iṣẹ ṣiṣe labẹ lilo deede.

For warranty claims, technical support, or replacement parts, please contact Progress Lighting customer service. Keep your purchase receipt as proof of purchase.

Progress Lighting Customer Service: Refer to the official Progress Lighting webAaye tabi apoti ọja fun alaye olubasọrọ lọwọlọwọ.