Codelocks CL1005 Standard Vertical Cabinet Lock User Manual

Ọrọ Iṣaaju

Thank you for choosing the Codelocks CL1005 Standard Vertical Cabinet Lock. This keyless digital lock provides secure access for cabinets and lockers. This manual provides detailed instructions for installation, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your lock.

Image: Codelocks CL1005 Standard Vertical Cabinet Lock. This image displays the front view of the CL1005 lock, showing the keypad and the main body.

Eto & Fifi sori

The CL1005 lock is designed for easy installation and can serve as a quick retrofit for existing cam locks or for new installations on units without a lock. It fits doors up to 1/2 inch (12.7 mm) thick and features a 5/8 inch (15.8 mm) threaded barrel.

Awọn akoonu idii:

• CL1005 Lock Body
• Iṣagbesori boluti
• Fifi sori Àdàkọ
• 2 x AAA batiri
• Cam (pre-installed or separate)

Awọn igbesẹ fifi sori ẹrọ:

1. Ṣetan ilẹkun: Use the provided template to mark and drill the necessary holes on the cabinet door. Ensure the door thickness does not exceed 1/2 inch (12.7 mm).
2. Insert Lock Body: Insert the threaded barrel of the lock body through the prepared hole from the front of the cabinet door.
3. Secure Lock Body: From the inside of the cabinet, place the mounting plate over the threaded barrel and secure it with the provided nut. Tighten firmly.
4. Install Cam: Attach the appropriate cam to the back of the lock mechanism using the provided screw. Ensure the cam rotates freely and engages with the cabinet frame when locked.
5. Fi Awọn batiri sii: Open the battery compartment cover on the back of the lock. Insert the 2 x AAA batteries, observing the correct polarity (+/-). Close the cover securely.
6. Iṣiṣẹ Idanwo: Before closing the cabinet, test the lock with the default code (refer to the operating instructions for default code and programming).

Awọn ilana Iṣiṣẹ

The CL1005 lock operates using a user-programmable code. It is powered by 2 x AAA batteries, providing approximately 15,000 openings.

Ṣii Titiipa:

1. Tẹ koodu olumulo oni-nọmba 4-6 rẹ sii.
2. The lock will emit a confirmation tone and the LED will flash green.
3. Turn the knob to the unlocked position.
4. Ṣii ilẹkun minisita.

Pipade ati Titiipa:

1. Pa minisita enu.
2. Turn the knob to the locked position. The lock will automatically engage.

Changing the User Code:

Refer to the specific programming instructions provided with your lock for detailed steps on changing the user code and master code. Generally, this involves entering a programming sequence followed by the new code.

Battery Failure Override:

In case of battery failure, the lock can be temporarily powered using a 9V battery. Locate the two contact points (LEDs) on the front of the lock. Apply the 9V battery across these points (positive to positive, negative to negative). While holding the 9V battery in place, enter the Master Code to open the lock. Replace the internal AAA batteries immediately after gaining access.

Itoju

Rirọpo Batiri:

When the batteries are low, the lock may emit a warning signal (e.g., multiple beeps or a red LED flash) upon code entry. Replace the 2 x AAA batteries promptly to ensure continuous operation. Always use high-quality alkaline batteries.

1. Open the battery compartment cover on the back of the lock.
2. Yọ awọn batiri atijọ kuro.
3. Insert new 2 x AAA batteries, ensuring correct polarity.
4. Pa ideri batiri naa ni aabo.

Ninu:

Fọ ìta titiipa naa pẹlu asọ rirọ, damp asọ. Yago fun lilo abrasive ose, olomi, tabi simi kemikali, bi awọn wọnyi le ba ipari ati ẹrọ itanna irinše.

Laasigbotitusita

Awọn pato

• Awoṣe: CL1005
• Brand: Àwọn àtìpa Kóòdù
• Titiipa Iru: Keypad, Keyless
• Ẹya Pataki: Keyless titẹsi
• Agbara: Awọn batiri 2 x AAA (ti a pese)
• Igbesi aye batiri: Approximately 15,000 openings
• Sisanra ilekun: Titi di inch 1/2 (12.7 mm)
• Iwon agba: 5/8 inch (15.8 mm) threaded
• Awọn iwọn (L x W x H): 6 x 2.5 x 1.5 inches (152 x 63.5 x 38.1 mm)
• Ìwúwo: 16 iwon (0.45 kg)
• Pari: Silver Grey (Painted)
• Ọna Iṣakoso: Fọwọkan
• Ara: Igbalode

Atilẹyin ọja & Atilẹyin

For warranty information, technical support, or further assistance with your Codelocks CL1005, please refer to the official Codelocks webojula tabi kan si wọn onibara iṣẹ Eka. Tọju iwe-ẹri rira rẹ bi ẹri rira.

Codelocks Official Webojula: www.codelocks.com