YITAMOTOR 2007-2021 Running Boards Nerf Bars Side Step Installation Guide

2007-2021 Running Boards Nerf Bars Side Step

Product Specifications:

  • Material: Steel
  • Finish: Powder-coated
  • Weight: 5 lbs
  • Compatibility: Passenger Right Side Crew Max Cab, Passenger
    Right Side Double Cab

Product Usage Instructions:

Before Installation:

Read the instructions carefully before starting installation.
Proper tools will improve the quality of installation and reduce
the time required. If any missing parts or damage are found, please
take a picture and contact us. Professional installation is highly
recommended. Periodically check to ensure all mounting hardware
remains secure and tight.

Step 1:

  1. Locate (3) mounting positions on each side.
  2. Remove factory bolts from mounting positions.
  3. Clean the sealant and dirt around mounting positions.

Step 2:

  1. Attach the bracket to the inner rocker panel and secure with
    (2) M8 hex bolts, (2) M8 flat washers, (2) M8 lock washers.
  2. Repeat to install remaining brackets, do not fully
    tighten.

Front Bracket:

Front Passenger Right Side Crew Max Cab

Front Passenger Right Side Double Cab

Center/Rear Bracket:

Front Passenger Right Side Crew Max Cab

Front Passenger Right Side Double Cab

Frequently Asked Questions (FAQ):

Q: Can this product be installed on the driver’s side?

A: No, this product is specifically designed for installation on
the passenger right side only.

Q: What tools are required for installation?

A: You will need a socket wrench set, screwdriver, and a
cleaning cloth for installation.

“`

BeforeInstallation:
Readthisinstructioncarefullybeforestartinginstallation.
Propertoolswillimprovethequalityofinstallationandreducethetime
required.
Ifmissingpartsoranydamagefound,pleasetakeapictureandcontactus. Professionalinstallationwouldbehighlyrecommended.
Periodicchecktoensureallmountinghardwareremainssecureandtight.
Step1:
1.Locate(3)mountingpositionseachside. 2.Removefactoryboltsfrommountingpositions.
3.Cleanthesealantanddirtaroundmountingpositions.

Step 2:
1.Attachthebrackettotheinnerrockerpanelandsecurewith(2)M8hex
bolts,(2)M8flatwashers,(2)M8lockwashers.
2.Repeattoinstallremainingbrackets,donotfullytighten.

FrontBracket

Center/RearBracket

Front Front

PassengerRightSideCrewMaxCab
PassengerRightSideDoubleCab
1 — —

Front Front

PassengerRightSideCrewMaxCab PassengerRightSideDoubleCab
2 — —

Documents / Resources

YITAMOTOR 2007-2021 Running Boards Nerf Bars Side Step [pdf] Installation Guide
2007-2021 Running Boards Nerf Bars Side Step, 2007-2021, Running Boards Nerf Bars Side Step, Boards Nerf Bars Side Step, Nerf Bars Side Step, Bars Side Step, Side Step, Step

References

Leave a comment

Your email address will not be published. Required fields are marked *