MARTINDALE ELECTRIC TB118KIT1 Complete 
Electrical Safety Kit for Gas Engineers 
User Manual

MARTINDALE ELECTRIC TB118KIT1 גאַנץ עלעקטריקאַל זיכערקייַט קיט פֿאַר גאַז ענדזשאַנירז באַניצער מאַנואַל

שליסל פֿעיִקייטן

  • Complete electrical safety kits for gas installation and service engineers
  • All in one solution for earth verification, locking off and proving dead
  • Includes voltage indicator, proving unit, locking off devices and earth checker
  • Slimline and miniature push pin MCB lock outs and fused spur locking off device
  • Essential for compliance with Electricity at Work Regulations for safe working and TB118

OInv2e0rv1i8ewGagsoeSsahfeerReegister Technical Bulletin 118 was amended. The changes require new test procedures to keep service engineers safe from electrical hazards. Starting from July 2020 Gas Safe registration will require knowledge and competency in how to safely isolate the electrical supply to appliances.

Martindale TB118KIT1 includes all the essential test tools for gas safety engineers to achieve compliance. The new kit combines easy to use tools for live voltage indication and earth loop verification together with fused spur and MCB locking off devices in a high quality soft carry case.
The full kit compromises of:

LOKKITGAS1

  • Four essential locking off devices, LOK10, LOK11, LOK7 for MCBs and LOKFS1 for fused spurs
  • Padlock, pen tag and carry case

VIPD138-S

  • חלקtage indicator and matching proving unit for safe and simple voltage אָנווייַז
  • Combination carry case

עזקסנומקס

  • Earth loop resistance and polarity checker for socket and spur testing

טקקסנומקס

  •  Soft carry case with shoulder strap

פּאַראַמעטערס

עלעקטריקאַל
נאָמינאַל וואָלtage range: 50 – 600V DC/AC rms
נאָמינאַל וואָלtage threshold indications:
50, 100, 200, 400 V DC/AC rms
חלקtage threshold tolerance:
Conforms to BS EN 61243-3
Internal impedance at ELV a.c.: 214kΩ
Polarity & voltage indication: ≥ 12V DC/AC rms
אַק/דק וואָלtage detection: automatic
Range detection: automatic
ענטפער צייט: <0.1 ס
Frequency range: DC, 1 – 400Hz
Test current: < 3.5mA at 600V DC/AC rms
פליכט פאַרהעלטעניש: 30 s אויף (אַפּערייטאַד) / 240 s OFF (רעקאָווערי)

ינווייראַנמענאַל
Temperature & Humidity (Operating & Storage): -10°C to 55°C ≤
85% רה
הייך: אַרויף צו 2000 ם

אַלגעמיין
Power: From circuit under test
Dimensions: 205(L) x 67(W) x 27(D) mm
וואָג: בעערעך 130 ג.

זיכערקייַט
Conforms to BS EN 61243-3 CAT IV 600 V
Class II, Double Insulation
פאַרפּעסטיקונג גראַד 2
IP שאַץ: IP54

עמק
Conforms to BS EN 61326-1

PD440S Proving Unit
רעזולטאַט וואָלtage: 440V nominal
Output frequency: 50Hz nominal

ינווייראַנמענאַל
Operating temperature: -10°C to 40°C at max. 70% R.H.
הייך: אַרויף צו 2000 ם
פאַרפּעסטיקונג גראַד: 2

אַלגעמיין
Power: internal batteries
Internal batteries: 6 x 1.5V, AA alkaline batteries (IEC LR6, NEDA 15A)
דימענשאַנז: 143 x 84 x 50 מם.
Weight packed: 400g approx. with batteries
Includes: 6 x 1.5V AA alkaline batteries, instructions

EZ650 Advanced Socket and Spur Tester
EZ650 E-Ze Check Xtra Pro is supplied with an IEC socket with an interchangeable 3 pin adaptor and a 3 way flying lead with croc clips allowing testing at sockets, fused spurs, light fittings, junction boxes and terminals.

נאָמינאַל אַפּערייטינג וואָלtage: 230 וו
אָפטקייַט: קסנומקסהז
Non-trip Earth loop impedance ranges: 0-1.7-5-10-100-200-500Ω
Earth loop threshold accuracy: ±(10% + 0.3Ω)*
חלקtage low indication: <195V ± 5%
חלקtage high indication: >270V ± 5%
Earth neutral voltage high indication: >30V ± 5%
Open earth indication: >500Ω
Temperature Range: -10 to 40°C, non-condensing
דימענשאַנז: קסנומקסמם X 315 מם X 260 מם
וואָג: אַפּפּראָקס. 250g
Power supply: From mains
מאַכט קאַנסאַמשאַן: <2.5 וו
אָווערוואָלtage category: Cat II / 300V
פאַרפּעסטיקונג גראַד: 2
Safety: Complies with BS EN 61010-1

* Note: Measurement accuracy can be affected by highly inductive
or capacitive loads distributed on the supply

LOKKITGAS1 Gas Engineer Lockout Kit
The 8 piece lock out kit contains the following items:

  • 1 x Padlock with unique key (PAD11RD)
  • 1 x Steel safety hasp (LOKHASP25)
  • 1 x Slimline grey isolation lock (LOK7)
  • 1 x Red miniature push pin MCB lock (LOK11)
  • 1 x Yellow push pin MCB lock (LOK10)
  • 1 x “Equipment Locked Out” tag which can be overwritten
  • 1 x Black marker pen (LOKMP)
  • 1 x Soft carry case (TC55)

אַרייַנגערעכנט
EZ650 Earth loop impedance & socket tester, LOKKITGAS1 Gas engineer lockout kit, VIPD138-S Voltage indicator & proving unit kit, TC88 Soft carry case

אָפּטיאָנאַל אַקסעססאָריעס
TAG4 Pack of 10 lock out kit tags

Martindale Electric Co. Ltd.
Metrohm House, 12 Imperial Park,
Imperial Way, Watford WD24 4PP.
T: 01923 441717 F: 01923 446900
www.martindale-electric.co.uk
[אימעיל באשיצט]

ווער. C1.0
Due to policy of continuous development, Martindale Electric reserves the right to alter equipment specification and description outlined in this document without prior notice. No part of this document shall be deemed to be part of any contract for the equipment unless specifically referred to as an inclusion within such contract. © 2022 Martindale Electric Co. Ltd.

דאקומענטן / רעסאָורסעס

MARTINDALE ELECTRIC TB118KIT1 Complete Electrical Safety Kit for Gas Engineers [pdf] באַניצער מאַנואַל
TB118KIT1 Complete Electrical Safety Kit for Gas Engineers, TB118KIT1, Complete Electrical Safety Kit for Gas Engineers

לאָזן אַ באַמערקונג

אייער בליצפּאָסט אַדרעס וועט ניט זיין ארויס. פארלאנגט פעלדער זענען אנגעצייכנט *