Asteria - logoTechnology Pte GML001Z Gravio CO2 Sensor
באַניצער מאַנואַל

  1. Gravio Matrix Led sensor is a product that can display 16 by 16-pixel pictures and animations technology. It transmits pictures based on Zigbee wireless transmission technology, and at the same time, uses an stm32 microcontroller to display pictures and animations.
  2. Gravio Matrix Led has this very simple appearance. It has only 3 buttons, which are matching buttons, screen switches, and gravity-sensing toggle switches.

Asteria Technology Pte GML001Z Gravio CO2 Sensor - front

Asteria Technology Pte GML001Z Gravio CO2 Sensor - Pair Buttonפּאָר קנעפּלAsteria Technology Pte GML001Z Gravio CO2 Sensor - Toggle switch and screen switchToggle switch and screen switch

Toggle Switches

When you use the Gravio matrix led, you can control whether the matrix uses gravity sensing to rotate the picture by flipping the switch. When the flipping switch is on the right, the gravity sensing is turned on. At this time, when you rotate the Gravio matrix led, the picture will be Follow the rotation, always facing up; when the toggle switch is on the left, the gravity sensor is turned off, no matter how you rotate the Gravio matrix led, the picture will not rotate

screen Switches

screen the switch can control the screen switch.

פּאָר קנעפּל

When you need to wirelessly transmit pictures to Gravio matrix led, you need to add it to the Zigbee gateway network now. When the gateway is allowed to access the network, press and hold the pair button for 5 seconds, and the Zigbee icon on the screen will flash. At this time, it will be added to the network of your gateway soon. After joining the network, the flashing Zigbee picture will be displayed. Prohibited, at this time you can transfer pictures or animations through the host computer

Network access steps: (for example we use Gravio Receiver2)
Insert Gravio receiver into pc, Mac, or Linux, open serial debugging tools, such as sscom

Typed hex:00 00 03 00 00 AA (build a network)
Go on:00 00 10 00 01 FF AA (Allow devices to connect to the network)
At this time, press and hold the button of Gravio matrix led for 5 seconds until the Zigbee icon will flash

When a gateway receives network access information,

ענטפער: Asteria Technology Pte GML001Z Gravio CO2 Sensor - gateway receives

When Gravio Matrix led is not normal, you can press and hold the button for 5 seconds to enter the matching network access state

send a picture

Asteria Technology Pte GML001Z Gravio CO2 Sensor - send a picture

You need to copy the mac address of Gravio Matrix Led in the textbox at the bottom(mac address text box), and click save
And you can choose an rgb (click open rgb file) file from the host computer and click send ,and few seconds it is will show on Gravio Matrix Led‘s screen

send text animations

In (please input text box)you can text less than 64bytes English alphabet and send to Gravio Matrix Led to show on the screen, you only need to type the alphabet in the text box and click send.

פקק ווארענונג סטאַטעמענט
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be  determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • ריאָריענט אָדער רילאָוקייט די ריסיווינג אַנטענע.
  • פאַרגרעסערן די צעשיידונג צווישן די ויסריכט און ופנעמער.
  • פאַרבינדן די ויסריכט צו אַ ווענטיל אין אַ קרייַז אַנדערש ווי די וואָס די ופנעמער איז פארבונדן.
  • באַראַטנ זיך מיט די הענדלער אָדער אַן יקספּיריאַנסט ראַדיאָ / טעלעוויזיע טעכניקער פֿאַר הילף

דעם מיטל קאַמפּלייז מיט טייל 15 פון די פקק רולעס. די אָפּעראַציע איז אונטערטעניק צו די פאלגענדע צוויי באדינגונגען: (1) דעם מיטל קען נישט פאַרשאַפן שעדלעך ינטערפיראַנס, און (2) דעם מיטל מוזן אָננעמען קיין ינטערפיראַנס באקומען, אַרייַנגערעכנט ינטערפיראַנס וואָס קען פאַרשאַפן אַ רירעוודיק אַרבעט.

די עקוויפּמענט זאָל זיין אינסטאַלירן און אַפּערייטאַד מיט אַ מינימום ווייַטקייט פון 20 סענטימעטער די קאַלאָריפער פון דיין גוף: ניצן בלויז די סאַפּלייד אַנטענע.

דאקומענטן / רעסאָורסעס

Asteria Technology Pte GML001Z Gravio CO2 Sensor [pdf] באַניצער מאַנואַל
GML001Z, 2AT7Z-GML001Z, 2AT7ZGML001Z, GML001Z Gravio CO2 Sensor, Gravio CO2 Sensor

לאָזן אַ באַמערקונג

אייער בליצפּאָסט אַדרעס וועט ניט זיין ארויס.