1. הקדמה
Thank you for choosing the VEVOR Walk-in Tunnel Greenhouse. This manual provides essential information for the safe assembly, operation, and maintenance of your greenhouse. Please read it thoroughly before beginning assembly and retain it for future reference.
בילד 1.1: די VEVOR אריינגאנג-טונעל גרינהויז, געוויזןasing its spacious interior with thriving plants and an open entrance.
This image displays the fully assembled VEVOR Walk-in Tunnel Greenhouse from an exterior perspective, with its main door open. Inside, various plants are visible, indicating a functional growing environment. The greenhouse features a green PE cover and a sturdy frame, situated on a well-maintained lawn.
2. זיכערקייַט אינפֿאָרמאַציע
Attention: Please read all safety warnings and instructions carefully before assembly and use.
- אַנקער: Be sure to anchor the greenhouse securely to the ground to prevent it from overturning due to wind or other environmental factors.
- Sharp Edges: Exercise caution when handling galvanized steel parts and mesh to avoid injury caused by sharp edges or other potential hazards. Wearing protective gloves is recommended during assembly.
- פֿאַרזאַמלונג: Follow the assembly instructions precisely. Do not attempt to modify the structure or use parts not supplied by the manufacturer.
- וישאַלט: Regular inspection and maintenance are crucial for safe and prolonged use. Address any damage promptly.
- קינדער און פּעץ: האַלט קינדער און חיות אַוועק פֿון דער פֿאַרזאַמלונגס־פּלאַץ. לאָזט זיי נישט שפּילן אינעווייניק אין גרינכאַוס אָן השגחה.
3. פּעקל אינהאַלט
Before starting assembly, verify that all components listed below are present and undamaged. If any parts are missing or damaged, contact customer support.
בילד 3.1: איבערview of greenhouse dimensions and included accessories.
This image provides a visual representation of the greenhouse with its key dimensions (19.4 ft length, 9.7 ft width, 7.4 ft height) and lists the included accessories: 1 Instruction Manual, 4 Ropes, 2 Gloves, 1 Allen Wrench, 4 Ground Stakes, and 1 Hex Wrench. The model number and product weight are also displayed.
אַרייַנגערעכנט אַקסעסעריז:
- 1 x ינסטרוקטיאָן מאַנואַל
- 4 רענטגענ ראָפּעס
- קסנומקס רענטגענ גלאַווז
- 1 x עלען רענטש
- 4 רענטגענ ערד סטייקס
- 1 רענטגענ העקס מוטער-שליסל
Note: Frame pipes and cover are packaged separately. Refer to the detailed parts list in the separate instruction manual for all frame components.
4. סעטאַפּ און אַסעמבלי
Assembly typically requires two people. Wear protective gloves during assembly. Choose a level, well-drained site for your greenhouse.
4.1 ראַם אַסעמבלי
בילד 4.1: דעטאַלירט view of the galvanized steel frame structure.
This image highlights the robust construction of the greenhouse frame, featuring upgraded galvanized steel pipes with a diameter of 24mm (1 inch) and a wall thickness of 0.5mm (0.02 inch). It also shows diagonal braces for enhanced stability and three ridge beams designed to prevent snow accumulation on the roof.
- אָפּלייגן קאַמפּאָונאַנץ: Carefully unpack all frame pipes and connectors. Organize them according to the parts list in your separate assembly guide.
- צוזאַמענשטעלן באַזע ראַם: Connect the base pipes to form the rectangular footprint of the greenhouse. Ensure all connections are secure.
- Install Arches: Begin installing the arched frame sections, connecting them to the base frame and to each other using the provided connectors and hardware. Pay attention to the orientation of each arch.
- Add Ridge Beams: Install the ridge beams along the top of the arches to provide structural integrity and support for the cover.
- Attach Diagonal Braces: Secure the diagonal braces as indicated in the assembly guide to enhance the overall stability of the frame.
- Assemble Door Frame: Construct the door frame separately and integrate it into the main structure at the designated end.
4.2 דעקל אינסטאַלאַציע
Image 4.2: Features of the waterproof and tear-resistant PE cover.
This image illustrates the protective qualities of the greenhouse's PE cover, highlighting its waterproof and tear-resistant properties. Insets show the material's durability, double-stitched seams for enhanced strength, and Velcro fasteners for easy window adjustment. The greenhouse is shown fully covered, protecting plants from rain.
- Drape Cover: Carefully unfold the PE cover and drape it over the assembled frame. Ensure it is centered and evenly distributed.
- זיכערע דעקונג: Attach the cover to the frame using the provided fasteners (e.g., clips, ties, or straps). Start from one end and work your way around, ensuring the cover is taut but not overstretched.
- Attach Door Cover: Secure the cover around the door frame, ensuring the zipper or Velcro closures align correctly for proper sealing.
- Anchor Edges: The extended PE cover edges should be weighted down with soil, rocks, or sandbags (not included) to enhance insulation, airtightness, and stability against wind.
4.3 Anchoring the Greenhouse
Proper anchoring is critical for the stability and safety of your greenhouse.
- ערד סטייקס: Drive the provided ground stakes through the designated loops or holes in the base frame into the soil.
- Tie-Down Ropes: Use the provided ropes to secure the greenhouse to additional ground anchors (e.g., U-shaped stakes, heavy-duty anchors, or concrete blocks) if necessary, especially in windy areas. Attach ropes to strong points on the frame.
- Bury Edges: Burying the extended skirt of the PE cover in a shallow trench around the perimeter provides additional stability and insulation.
5. אַפּערייטינג ינסטרוקטיאָנס
5.1 ווענטילאַציע און טעמפּעראַטור קאָנטראָל
Image 5.1: Greenhouse performance in varying seasonal conditions.
This image illustrates the greenhouse's ability to maintain an ideal growing environment year-round. The left side depicts the greenhouse in a snowy winter landscape, emphasizing its excellent insulation properties to keep plants warm. The right side shows the greenhouse under bright sunlight, highlighting its UV-resistant cover that prevents sunburn for plants.
- Roll-up Windows: Your greenhouse is equipped with 12 roll-up windows. Open them to allow airflow and reduce internal temperature. Close them to retain heat and humidity. The mesh netting on windows helps keep pests out.
- סווינג טיר: The side-opening door can be opened for rapid cooling and increased ventilation. Ensure the door is securely closed using its Velcro fasteners when not in use to maintain internal conditions.
Image 5.2: Flexible door design for optimal ventilation.
This image demonstrates the wide opening capability of the greenhouse door, which can swing open 180 degrees for maximum ventilation and easy access. An inset highlights the Velcro system used for full sealing when the door is closed, ensuring temperature and humidity control.
5.2 פּלאַנט מאַנאַגעמענט
- וואָטערינג: The walk-in design allows for easy access to water and fertilize plants without excessive bending.
- שעלווינג: The spacious interior accommodates multiple plant shelves, optimizing growing space.
6. וישאַלט
- רעגולער רייניקונג: Clean the PE cover periodically with mild soap and water to remove dirt, dust, and algae buildup, which can reduce light transmission. Avoid abrasive cleaners.
- דעקל דורכקוק: Regularly inspect the PE cover for any tears, punctures, or signs of wear. Small tears can be repaired with greenhouse repair tape. Replace severely damaged covers.
- ראַם דורכקוק: Check the galvanized steel frame for any signs of rust, loose connections, or damage. Tighten any loose bolts or connectors.
- אַנקערינג טשעק: Periodically verify that the greenhouse remains securely anchored to the ground, especially after strong winds or heavy rainfall. Re-secure stakes and tie-downs as needed.
- שניי באַזייַטיקונג: In areas with heavy snowfall, gently remove accumulated snow from the roof to prevent excessive weight from damaging the frame or cover. The ridge beams help, but manual removal may still be necessary.
7. טראָובלעשאָאָטינג
| פּראָבלעם | מעגלעך סיבה | לייזונג |
|---|---|---|
| Greenhouse unstable/wobbles | נישט גענוג אַנקערינג; פרייַ ראַם פֿאַרבינדונגען; שטאַרקע ווינטן. | Ensure all ground stakes are fully inserted. Use additional tie-downs and anchors. Bury cover edges. Tighten all frame connections. |
| Cover tearing/damage | Sharp edges on frame; prolonged UV exposure; strong winds; improper installation. | Inspect frame for sharp points and cover with tape if found. Repair small tears with greenhouse repair tape. Ensure cover is taut but not overstretched during installation. |
| Excessive heat inside | ניט גענוגיק ווענאַליישאַן. | Open all roll-up windows and the main door to increase airflow. Consider adding a small fan for circulation if needed. |
| Heat loss/cold inside | Poor sealing; cover damage; extreme external temperatures. | Ensure all windows and door are fully closed and sealed. Bury cover edges. Repair any cover damage. Consider supplemental heating in very cold climates. |
| וואַסער זאַמלט זיך אויף דאַך | Cover not taut enough; frame sag. | Re-tension the cover to ensure it is taut. Check frame connections for any signs of sagging and reinforce if necessary. |
8. ספּעסאַפאַקיישאַנז
| שטריך | דעטאַל |
|---|---|
| מאָדעל נומער | 3×6×2.25m(6) G |
| פּראָדוקט דימענשאַנז (L x W x H) | 19.4 X 9.7 X 7.4 ft (590 X 295 X 225 סענטימעטער) |
| פּראָדוקט וואָג | 34 קג (74.9 לבס) |
| ראַם מאַטעריאַל | גאַלוואַניזעד שטאָל |
| Frame Pipe Diameter | 1 אינטש (24 מם) |
| Frame Wall Thickness | 0.02 אינטש (0.5 מם) |
| דעקן מאַטעריאַל | 140 ג/מ² פּאָליעטאַלין (PE) |
| נומער פון Windows | 12 (Roll-up with mesh) |
| נומער פון טירן | 1 (Swing door with Velcro closure) |
| קאָליר | גרין |
| דרינענדיק / דרויסנדיק באַניץ | דרויסנדיק |
| ספּעציעלע פֿעיִקייטן | Durable, Heavy Duty, UV-Resistant, Waterproof |
9. וואָראַנטי און שטיצן
VEVOR products are designed for durability and performance. For specific warranty details regarding your VEVOR Walk-in Tunnel Greenhouse, please refer to the warranty card included with your purchase or visit the official VEVOR webפּלאַץ.
If you encounter any issues during assembly, operation, or maintenance, or if you have questions about your product, please contact VEVOR customer support. Have your model number and purchase information ready when contacting support.
VEVOR קונה סערוויס: ביטע זעט די קאָנטאַקט אינפֿאָרמאַציע וואָס איז צוגעשטעלט אויף דער VEVOR באַאַמטער webוועבזייטל אדער אייער קויפן דאקומענטאציע.
