LOYALHEARTDY 350W Follow Stagאון ספּאָט ליכט

1. הקדמה

This manual provides instructions for the safe and efficient operation of your LOYALHEARTDY 350W Follow Stage Spot Light. This high-intensity stage spotlight features both DMX and manual control options, an adjustable tripod, and a multi-color beam for various performance lighting needs. Please read this manual thoroughly before use and retain it for future reference.

2. פּעקל אינהאַלט

באַשטעטיקט אַז אַלע זאכן וואָס זענען אויסגערעכנט אונטן זענען אַרייַנגערעכנט אין אייער פּעקל:

• 1 x 350W Stage Spotlight Unit
• 1 x Tripod Bracket
• 1 x Signal Cable
• 1 x מאַכט קאַבלע
• 1 x English Instruction Manual (this document)

3. זיכערקייַט אינפֿאָרמאַציע

וויכטיק זיכערהייט אינסטרוקציעס:

• שטענדיק פֿאַרבינדן דעם אַפּאַראַט צו אַ געערדטער עלעקטרישער ווענטיל.
• פאַרזיכערן די וואָלtage matches the product's requirements (110-240V 50/60Hz).
• ניצט נישט דעם אַפּאַראַט אויב דער עלעקטרישער שנור איז געשעדיגט.
• ויסמיידן דירעקט אויג ויסשטעלן צו די ליכט שטראַל.
• זיכער מאַכן גענוג ווענטילאַציע אַרום דעם אַפּאַראַט צו פאַרמייַדן איבערהיצונג.
• האַלטן די אַפּאַראַט אַוועק פון נעץ און עקסטרעם טעמפּעראַטורעס.
• בלויז קוואַלאַפייד פּערסאַנעל זאָל דורכפירן ריפּערז.

4. סעטאַפּ

Follow these steps to set up your stage spot light:

1. אַסעמבאַל די דרייַפוס: Unfold the tripod legs and secure them firmly. Adjust the height using the adjusting knob to your desired level (47.24-59.84 inches).
2. בארג די פּרויעקטאָר: Carefully place the spotlight unit onto the tripod's mounting pin. Secure it by tightening the knob on the tripod bracket. Ensure the unit is stable before proceeding.
3. פאַרבינדן מאַכט: Insert the power cable into the power input port on the spotlight unit and then into a suitable power outlet.
4. Connect DMX (Optional): If using DMX control, connect a DMX cable from your DMX controller to the DMX IN port on the spotlight. If linking multiple units, connect from DMX OUT of the first unit to DMX IN of the next.

בילד: The adjustable tripod stand, showing the mechanism for setting the height of the spotlight unit.

5. אַפּערייטינג ינסטרוקטיאָנס

The LOYALHEARTDY 350W Follow Stage Spot Light offers both manual and DMX control options.

5.1 מאַנואַל קאָנטראָל

The control panel on the unit allows for direct manual adjustments:

• מאַכט אויף / אַוועק: Use the red switch labeled 'ON/OFF' to power the unit.
• קאָליר סעלעקציע: Press the dedicated buttons for White, Yellow, Orange, Green, Blue, or Red to select the desired light color.
• סטראָבע: Use the 'STROBE' slider to adjust the strobe speed (1-7 times/second).
• Brightness/Dimming: Use the 'DIMMING' slider to adjust the light intensity.
• עפענונג אַדזשאַסטמאַנט: Use the 'APERTURE' slider to control the size of the light beam, allowing for focused spot lighting.
• Color Temperature Correction: Adjust the color temperature between 5600K (Normal), 6000K (High), and 3200K (Low) as needed.
• ווינקל אַדזשאַסטמאַנט: Loosen the knobs on the side of the spotlight unit to tilt and pan the light, then tighten to secure the position.

בילד: The control panel, illustrating the buttons for color selection, and sliders for strobe, dimming, and aperture adjustments.

בילד: Demonstration of the vibrant color lighting capabilities, showing the available color options.

5.2 DMX קאָנטראָל

For advanced control, connect the unit to a DMX controller. Refer to your DMX controller's manual for specific programming instructions. The spotlight supports standard DMX protocols for remote control of color, strobe, dimming, and aperture functions.

6. וישאַלט

Regular maintenance ensures optimal performance and longevity of your spotlight:

• רייניקונג: Use a soft, dry cloth to clean the exterior of the unit. For the lens, use a specialized lens cleaning solution and cloth to avoid scratches.
• ווענטילאַטיאָן: Ensure the cooling vents are free from dust and obstructions. The unit features a high-intensity air cooling system.
• סטאָרידזש: When not in use, store the spotlight in a cool, dry place, protected from dust and physical damage.
• Lamp פאַרבייַט: The unit uses an OS-RAM SI-RIUS HRI 350W lamp. לamp replacement should only be performed by qualified technicians.

7. טראָובלעשאָאָטינג

אויב איר טרעפט פּראָבלעמען, זעט די פאלגענדע געוויינטלעכע פּראָבלעמען און לייזונגען:

• קיין מאַכט: Check the power cable connection, ensure the power switch is ON, and verify the power outlet is functional.
• קיין ליכט רעזולטאַט: Confirm the unit is powered on. Check if the lamp is functioning (if applicable, consult a technician). Ensure dimming is not set to minimum.
• Incorrect Color/Function: For manual control, verify button selections and slider positions. For DMX control, check DMX cable connections and controller settings.
• איבערהייצונג: Ensure ventilation fans are clear and operating. Do not block air vents. Allow the unit to cool down if it becomes excessively hot.

אויב פּראָבלעמס אָנהאַלטן, קאָנטאַקט קונה שטיצן פֿאַר הילף.

8. ספּעסאַפאַקיישאַנז

בילד: Detailed product dimensions of the spotlight unit and the adjustable tripod.

9. וואָראַנטי און שטיצן

For warranty information, please refer to the terms and conditions provided at the time of purchase or contact the seller directly. For technical support or service inquiries, please reach out to LOYALHEARTDY customer service through the platform where the product was purchased.