SLUSH MACHINE
MANUAL

Please read carefully before using the slush machine

lntroduction

1 .1 Manufacturer
The manufacturer’s details are shown on the identification plate
1.20perator
Based on different applications.there are two types of persons.
User
In accord with Health standard people trained compelete techniques,
Know all to distribute slush have below ability after reading this manual
Place and change slush machine
Properly dispensing the products
Cleaning the slush machine
Specialized technical people
Studied this manual and trained how to install ,use and maintain this slush machine;
When serious fault.can repair the slush machine and know this manuswell;
Master all information of the manual and can explain the diagrams and graphs correctly;
Know important hygienic knowledge well.prevent accident occuring, know technical and safety standard
Have experience to serve this kind of slush machine.
Master treatment measure to emergency.find separated safety device and use the machine correctly
People are banned to use the machine who do not accord with above requirement
1.3Manual distribution
Users have to read this manual carefully before using.
1.3.1 Function and content
Offer vital information of using and installing
1.3.2Who to read manual
Users and specialized technical people.
This manual is an nseparable part of the machine.
So t needs to be delivered to the purchaser when sold.
1.3.3How to keep manual
Manual has to be placed nearby the machine and keep ntact and clear

Machine description

2.1Usage
This machine is specially used for making slush.If used to make dairy and other foods.bowl material temperature needs to be tested and abide by the machine’s current regualtion and standard
2.2Main Component 

1. Bowl roof
2. Bowl
3. Control panel
4. Water tray
5. Water tray cover
6. Drain hose
7. Tap
8. Handle
9. Machine foot

In this manual,the tems mean as below
XRJ3LX1, one-bowl slush mach,ne
XRJ3LX2, two-bowl slush machine
XRJ3LX3, three-bowl slush machine
2.3Technical data
Remarks:
Capacity and weight are approximate number

Manufactory has right to change and will not notice specially.
Any change or increase has to be approved and executed by Manufactory .2.4 Control panel

	Switch on/off
	Bowl Button
	Display screen
	Slush hardness
	Slush softness
	Light
	slush system/cleaning) system/Standby system

Safety manual

Slush machine parts and condenser’ s installation, slush machine troubleshooting. exclusion and maintenance have to be operated by manufacturer professionals or people who have related experience. Without experienced people monitoring or guiding, slush machine can not be used by disabled,sense disable, mental disable people’s, lack of experience and knowledge Children need to be taken care when playing nearby the machine.
When machine’s wire broken, they have to be replaced by manufacturer professionals or people who have related experience.
When machine scraped, it has to be delivered and handled by related authority institution

Transportation and storage

4.1 Packing
Wooden box, contoured foam & collect.
Packing size (approxirnate)

4.z.Transportation
Keep upward and carried by two people at least.
4.3 Storaqe
Notice: please do not exceed three layers.
Remarks: packing size and weight are approximate.

lnstallation

The slush machine has to be installed ndoor with hard and plain ground under enough light and ventilation (Ground inclination can’t be more than 2 degree)
5.1 Parts list
After cleaning and disinfecting all indicated parts in manual have to be coated with lubricating oil.
5.2Position to install
Installation position have to planed in advance;
Installation place have to be hard and plain
Installation condition is enough light and ventilation and clean;
Power socket s also needed;
Installation distance from other objects see below fig.6 5.3 Handling package material
Handling packing material separately under local rules and we suggest keep t to repack and ship n future.
5.4Connect power
Ensure slush machine is off before connecting power.
Then plug in to connect power.
Data can be referred from machine back nameplate.
Warning: Socket has to be placed within user touching distance in order to unplug quickly when emergency without using other tools.

0peration

Warning

Note:

1. The iquor generally refers to be 40% alcohol by volume.
2. The SLS xx will blink when the gear is adjusted and the machine will automatically save the setting after 5 seconds. After that the display stops flashing and the temperature of the liquid in the cylinder is displayed in the form of Fancy Celsius, e.g. xx F.
3. When the temperature nside bowls is very ow, there will be frosting on the outside of the bowls, which s normal.
4. At low temperatures, the spout may freeze. Just cast a brush toward the spout and the slush/margarita wine slush/ice cream will flow out proper y.

6.1 Preparing material and stirring evenlyAttention
Operate under manufactory direction;
Dilute and stir concentrated liquid with water in a container
Mixture sugar content should be > 15% lower content will damage the augers and gear motors
If you need to make margarita snow slush, pour the appropriate percentage of margarita into the container according to your needs
Remove the lid as below steps

1. Lift the top lid;
2. Pour the material nto bowls

. Warning:
Hot iquid can not be put n(hot liquid means degree exceed 40 ‘C)
Material level can not exceed maximum height level
3.Close the top lid after pouring the material
Warning :Before connecting power or starting machine, put material into bowl
Material can not just be water. Warning:Banning patting hand in bowl when machine s working
6.2 Starting a 1-BOWL SLUSH MACHINE Model: XRJ3LX1 

The following controls are on the panel:
A. Main Switch : t is used to switch on/off the power supply to the whole machine.
8.Light Switch   : It s used to switch on/off the light.
C. Clean Function: Add appropriate water n advance,then keep clicking the “SET” switch e . until the display shows “CLR” that means open Clean System. After cleaning, click the SET switch a once more, the display shows “OFF” that means close Clean System. When the cracks aren’t clean, use the provided towel to clean any remaining dirt and wipe up any water stain.
D. Slush/Margarita Wine Slush/Ice Cream I Frozen Drink
Function: Keep clicking the SET switch until the display shows SLS that s used to switch on Slush System.
Then you can click “+ to make slush/ice cream harder and can also click to make slush/ice cream softer. The machine will automatically save the setting after 5 seconds.
6.3 Starting a 2-BOWL SLUSH MACHINE Model: XRJ3LX2
The following controls are on the panel:
A. Main Switch : It is used to switch on/off the power supply to the whole machine.
B: It s used to switch on/off the light B.Light Switch
C. Clean Function: Add appropriate water in advance,

then click bowl 1 or bow12llto select the bowl you want to operate. then keep cuckrnq the “SET” switch , until the display shows “CLR” that means open
Clean System. After cleaning, click the SET switch once more, the display shows “OFF” that means close
Clean System. Ditto for operating the other bowl. When the cracks aren’t clean, use the provided towel to clean any remaining dirt and wipe up any water stain.
D.Slush/Margarita Wine Slush/Ice Cream I Frozen Drink
Function: First click bowl 1 or bowl 2to select the bowl you want to operate. Then keep chckmq the
SET switch until the display shows SLS that s used to switch on Slush System. Then you can click “+” to make slush/ice cream softer. The machine will to make slush/ice cream harder and can also click “-” automatically save the setting after 5 seconds. Ditto for operating the other bowl.
6.4 Starting a 3-BOWL SLUSH MACHINE Model: XRJ3LX3
The following controls are on the panel:
A. Main Switch   : It is used to switch on/off the power supply to the whole machine.
B.Light Switch : It s used to switch on/off the light
C. Clean Function: Add appropriate water in advance, then click bowl 1 , bowl 2 II or bowl 3 to select the bowl you want to operate. then keep clicking  the “SET” switch   , until the display shows “CLR” that means open Clean System. After cleaning, click the SET  switch “‘ once more, the display shows “OFF” that 1means close Clean System. Ditto for operating other bowlsWhen the cracks aren’t clean, use the provided towel to clean any remaining dirt and wipe up any water stain.
Function: First click bowl 1
D.Slush/Margarita Wine Slush/Ice cream I Frozen Drink or bow12 or bowl3 to select the bowls you want to operate. Then keep clicking the SET switch e until the display shows SLS that s used to switch on Slush System. Then  you can click”+”
to make slush/ice cream harder and to make slush/ice cream softer. The  machine will automatically save the setting after 5 seconds.
Ditto for operating other bowls.
6.5 Dispensing slush
Pull down the handle and slush will outflow from the bowl
Attention: if distribute slush first time or after a long stop ,please extrude and waste a little and then distribute customers.
6.6 Emergency
Warning: When emergency, machine needs to be turned off by power button and cut off power
If frozen, cut off power and ask for specialized people to handle. If fire, clear nearby area and ask for professionals.

Cleaning and maintenance

Before cleaning or maintaining external parts, please ensure main switch is off and unplug.
Any cleaning or maintaining protection supplies needs to wear (gloves, glasses an so an) based on local safety standard

• When cleaning or maintaining, operate as below.
• Wear protective gloves against an accident.
• Do not use solvent or flammable substance
• Do not use tough or metal sponge to clean machine or parts
• Do not spray liquid to nearby area.
• Do not wash parts in the bow!.
• Do not dry parts in furnace or microwave oven.
• Do not immerse the machine in water
• Do not spray the water to the machine directly.
• Warm water and approximate cleaner can be used (abiding by local law and rules)
• After finishing, make sure that all protective covers and guards that have been removed or opened and sent back in place and properly secured.

Cleanliness and hygiene have to be taken carefully and forcibly based on local standard to ensure qualified slush
Cleanliness and hygiene have to be taken carefully and forcibly based on local standard to ensure qualified slush Bowl needs to be cleaned everyday at least and abiding by local laws and regulations And cleaning times may be added based on different products More information, please consult manufactories. if machine will not be used one day continuously please clean distributing taps with clean rag
Even though machine’ s components stainless steel, plastic and rubber are easy to clean as well as its shape, it is still necessary to prevent germs and fungi reproduction due to halfway cleaning When the plug is not pulled out or the total switch is in the open state, do not clean or maintenance the machine.
7.1 Empty Bowl
Before cleaning bowl, empty bowl If it is the first time to use, no need to make it empty.
This manual just explains one bowl as sample Other bourls’ operat ons are the same based on related their buttons. Please set the bowl to “clean state”, then pour material from bowl.
7. 2 Disassembling the dispensing tap
Before removing the bowl, it is recommed to disassemble the tap, after cleaning, the tap must not be reapplied until the bowl has been correctly positioned n its seat Remove fastener with a screwdriver, then disconnect the dispensing handle by pushing upward, then push the piston and spring downward, remove the 0-ring. Put all spare parts in lukewarm water( water temperature around so-o and clean as fig. 9Do not disassemble taps when there are products or liquid n bowls.
7.3 Move out bowl and cover
Move out every bowl to clean the machine.
Move out the bowl as below steps:

1. Lift the top cover upward and take t out. Pull the tank upward and outward to completely remove it from its seat.
2. Screwing off the nut.
3. Take out the stirrer and the seal of stirrer. See Fig.10.

7.4 Clean and disinfect parts
All dismantled parts should be cleaned thoroughly
Importance: Cleaning way has to abide by local current hygiene standard ..
Please operate as below instructions:
Pour water in the container. mix sanitizer with water (Add 2% sodium hypochlorite to water)
Sponge with sanitizer clean bowl, cover and evaporator thoroughly clean with water thoroughly
Add sanitizer to another container.
Put dismantled parts in sanitizer 30 minutes.
Re clean with water thoroughly.
Make the parts dry.
Assemble machine under 7.Sinstruction.
Sponge with sanitizer clean the roof and the parts touching the raw material. Retain 30 minutes
Clean bottom surface with water 2-3 times by the sponge.
Put the cover at clean area and dry it by rag
Ban cleaning by water or disinfecting before taking away the cover

7.5 Reset cleaned parts
All disinfected parts have to be reassembled carefully some parts need to be lubricated to work normally.
Put gasket(A) on stirrer.see Fig.12 Importance: Check gasket in regular if broken. Please replace new one. Replace gasket(A) once at least one year After gasket (A) is installed in, coat the inside of gasket (A) with the provided grease. see Fig.13 Seefig.14-1
Replace the seal ring. When the motor part leaks, you need to replace the seal ring Take out the motor bracket connected to the motor and then replace the head seal ring (washer of axis, seal of axis).When replacing. You need to add some grease. Then install the motor bracket connected to the motor. Fixed the stirrer and nstall the bowls as Fig.15 Attention: Adjust the bowls to appropriate location. Install the roof as Fig 16 Press down top roof until its joint fit in with motor base.
Install taps as below instructions as Fig.17

1. Lubricate bolt totally with grease.
2. Insert screw when taps are steady.

Attention: lnstall all parts under figures instructions.Please apply grease well to  prevent iquid leakage.
7.6 Clean step
Before using this machine, below cleaning steps are needed

1. Fill bowl with water fully
2. Start machine only in cleaning mode and stir for 5 minute
3. Stop machine and open tap to clear container.

7. 7 Cleaning drip tray
Drip tray should be emptied and cleaned everyday
Attention: All machine drip trays should be cleaned drip tray need to be emptied and cleaned. Take out drip tray by lifting from top.
Wash the tray and grid.separately with lukewarm water.Dry all Of the components.Fit the tray back in place and press down to secure it to the machine.Reposition the grid on top of the tray
When machines stopped ,clean by wet rag and dry the parts.
7.8 Replace bulb
Only when machine power is off and unplugged bulb can be replaced
According to below figure, open the small back panel, replace the LED bulb, after assembled put the panel back, confirm closed well.
7.9 Clean condenser
Only professionals can clean condenser .They know all operating steps well using approximate device and abide by local aw and regulation strictly
Condenser needs to be cleaned in regular.0
Warning: Machine sharp surface may reveal after dismantling safety protection parts. Dirty condenser will weaken machine function. Condenser can be seen after taking out safety protection parts.
Even though only one plate (front or back or side) is not installed the machine is also banned to use. Operators are banned to clean condenser
Protection parts need to be positioned by Screwdrivers
7. 9.1 Cleaning condenser of one-bowl slush machine
Safety protection parts need screwdrivers to fasten and dismantle.

1. Loose side panel screw.
2. Take out side panel
3. Dismantle safety protection parts. Brush dust from condenser surface with dry brush as Fig21

After cleaning condenser, reposition safety protect on parts
7.9.2 Cleaning condenser of two-bowl slush machine
According to the following instructions

1. Loose 3 crews of the back plate.
2. Loose S screws of the side plate.
3. Take out the side panel.

Dismantle safety protection parts.
Brush dust from condenser surface with dry brush as below. 7.10 Scheduled maintenance
This machine needs to be maintained by professionals in regular (at least 1 year).
Regular maintenance can ensure machine and its parts in good safety state
Any broken parts need to be replaced with original manufacturer
When any parts of machine are malfunctioned or broken machine is banned to use.
The user can not maintain the machine himself

Waste treatment

Electronic waste need to be handled according to2002/96/EC
But wastes need to be dismantled and classified and useful parts should be recycled
Above rubbish bin reminds people classifying rubbish.
Treating wastes correctly will protect our environment.

Troubleshooting

9.1 Fault Codes and Solutions For Slush Machine
9.1.1. When the temperature sensor is not connected,”LL”is displayed
Check whether the temperature sensor is nstalled well. or the connecting wire is damaged or broken, replace the temperature sensor.
9.1.2 The temperature sensor is short-circuited and it displays “LL”
Check whether the temperature sensor is nstalled properly, or the connecting wires are damaged and connected together, orthe temperature measured by the temperature sensor exceeds 60″C replace the temperature sensor.
9.1.3 When the grid voltage is too high, the machine stops working and generates an alarm code “El Err”
9.1.4. When the grid voltage is too low, the machine stops working and generates an alarm code “E2 Err”
1: it is recommended that customers buy a voltage stabilizer, so that the voltage can be used within a reasonable range
2: Change the voltage alarm parameters without generating voltage alarm
I. In the power-on state, long press the”Settings” button for 3 seconds to enter the setting menu, and the window flashes asII.Then click the “Settings”button,the window flashes as Ill.Then click the”Slush softness” button to set the value to O
IV.Wait until the display does not flash,indicating that the setting is successful
9.1.5. The measured motor current is too high,the current channel generates an alarm and protects the shutdown,the display code is E3 Err

1. If the mixing shaft is blocked and the shutdown protection is caused,it will automatically restart after 5 minutes
2. If the motor is broken and rotates very slowly or cannot rotate, you need to replace a new motor
3. Or change the motor current alarm parameters and stop if no alarm is generated, and then check whether the motor is rotating

I. In the working state,long press the “Setting” button for 3 seconds to enter the setting menu, the window flashes as II.Then click the “Setting”button, the window flashes as Ill. Then click the “Setting” button, the window flashes asIV.Then click the”slush softness”button to set the value to O
V .Wait until the display does not flash, indicating that the setting is successful

Intelligent electronic valve system

Slush machine explosive diagram

Email: support@acekool.vip

Documents / Resources

Yasir Electronics SC 3 Space Slush Machine [pdf] Instruction Manual SC 3 Space Slush Machine, SC 3, Space Slush Machine, Slush Machine, Machine

References

• User Manual