CLOUDHAWK
https://yardforce.github.io/uni-qrcode.html
CloudHawk App
Read this manual carefully prior to operating the robotic lawnmower. Keep this manual in a safe place and have it ready for future reference.
About CloudHawk
CloudHawk is an APP which is used across the Yard Force robotic lawnmower product range.
CloudHawk supports multiple connection methods, including bluetooth, WIFI, and 4G. Before you try to connect your device with CloudHawk, make sure you follow the below instructions:
- If you use a bluetooth supported device, please make sure that you are close to the mower when you try to connect.
- If you use a WiFi supported device, before you set up the connection, please double check your house router transmit frequency, our WiFi chip only supports 2.4G, if you house router running with 5G, please check if your house router supports 2.4G, if so please check your house router manual and change the setting to 2.4G.
- If you use a WiFi supported device, before you set up the connection, please check your docking station location, we recommend that the docking station should be well covered with your house router signal, reference diagram below:
Explore as Guest
Before you sign in to your account, you can also explore our application as a guest, there are three options available within guest mode:
FAQ: Select the model you purchased and view the related questions and answers.
Online store: Select the country and view the connected products available. Product video:
Find the YouTube tuition video from this segment.
Account Registration
Create account/login
CloudHawk supports third party social media login, for android version, it supports Facebook and Google ID, for iOS device, it supports Facebook Apple ID and Google ID.
You can login using your mobile number or email address, for email registration you will receive the verification code to the chosen email account, remember to check your spam folder.
Your password should be more than 6 digits, and it should contain one uppercase letter and one number.
NOTE: please authorize the application “location” , to allow the location and weather information.
Add device
Use the”+” button at the right lower corner of homepage to add the device.
- Use the search box, input the product and search it directly.
- Select according to product series and find the name of the purchased product.
- Input (or scan) the product series number (SN and related QR code can be found on the mower main nameplate), then you can find and add the device.
Series number verification
After the series number has been installed into the APP, the system will search and fetch the data from the service side, meanwhile the system will also detect if the series number is already registered by another user.
Grant System Access
Before configuring the mower, the APP need access permission to complete the process.
- For bluetooth device, the application needs your mobile phone “Bluetooth” and “Location” authorization.
- For WiFi device, the application needs your mobile phone “WiFi” and “Location” authorization.
Enter Configuration Mode
Each model has different connection pathways, see which one you should use below:
Bluetooth device
After you grant the Bluetooth and location access, then follow page:
A will display. Please press the Bluetooth symbol button, make sure that the below BLUE LEDis lighting on (for Easymow, Mowbest, SA650B, SA900B, Bluetooth is always activated).
NOTE Bluetooth is enabled by default for following models: MB400, MB800, Compact 300RB, SA650B, SA900B, Classic 500B, Classic 600B, XPower 400, XPower 800.
WiFi device (Compact 400R series)
After you grant the WiFi and location access, then follow page:
B will display. Before your enter configuration process, normally the WiFi LED should flash slowly (one flash per second).
To configure the WiFi, the user need press the WiFi button and hold for 5 seconds, until the LED is lit continuously, this means the device has been configuring.
LED flashing quickly(four times per second): Internet connected. LED flashing slowing (one time per second): Connection failed, please repeat above process LED is lit continuously: Device has been configuring.
WiFi device(NX series)
After you grant the WiFi and location, then follow page:
C will display. Before your enter configuration process, normally the WiFi LED should flash slowly (one time per second).
To configure the WiFi, follow the below process:
- Power on the device and enter device control interface with PIN code.
- Press the WiFi button.
- Use the numeral key “1” to select the “WiFi configure”.
- Then the device is under WiFi configuration process, follow the rest of the APP instructions.
LED flashing quickly(four times per second): Internet connected.
LED flashing slowing (one time per second): Connection failed, please repeat above process.
LED is lit continuously: Device has been configuring mode, not connected with internet.
Assistant configuration with AP mode
For WiFi devices, due to the different configuration conditions, sometimes the device may fail to complete the internet configuration process within smart configure, for this situation we suggest to follow our below instructions:
- When the smart configure has failed, the upcmoing page will show up (D), click OK button to proceed on the follow process.
- The following page (E) will display, currently the mobile phone is connected to your house router, you need change the WiFi and select the WiFi which created by our robotic mower, please click “Setup WiFi” button to enter the WiFi select page.
- In the mobile phone WiFi Selection page (F), please select the WiFi whose name is start with “WIFI-SNxxxxxxxxxxx”, please kind in mind that this WiFi does not have internet access but please give the authorization to connect.
- After you select and connect to the hotspot which created by robotic mower, please click the return button and back to our APP page (G), you will find that currently your mobile phone is connected to WIFISNxxxxxxxxxx, and then please click “Next” button.
- Then the mobile phone will share your house router SSID and password to your mower by local network, once the mower can receive this file, it will try to connect to the internet, finally you will see the page (H), means robotic mower now is finally connected with internet.
NOTE: in most cases, the users will not need any further setting as you have already completed the configuration with smart configure and “Assistant configuration with AP mode” is our additional setting for the situation when you are failed to connect the mower to internet within smart configure. If you still failed to connect the mower, we suggest to repower the device and repeat the whole configuration process again.
APP Homepage
After the device is successfully configured, the device will show on t h e homepage.
Device Mainpage
After clicking the robot mower photo on the APP homepage, the user can enter robotic mower device mainpage.
Work Schedule Settings
Choose either “Manual” or “Auto” to set up the work schedule.
Manual mode:
Set two time ranges for each day, if the time slot is activated, then it will show ” X ” on the right top corner. Click the ” + ” and set the start and stop time, then this time slot will be activated.
Auto mode:
With auto mode, the application needs more information about the lawn, then it can give the recommended working schedule. Input the lawn size, preferred working day and verify garden conditions (complicated or simple.) Once you click the “Generate” button, the application will generate a recommend value.
System Time Setting
Set the mower system time automatically (based on your mobile phone time) and also set it manually
Boundary Settings
- Trimming: edge cutting function on/off
- Width: Set how far the mower is allowed to go beyond the perimeter wire. (Function only for SA series, NX series, Revola series)
- Signal: Change from S1 to S2
Ultrasonic Settings
The user can active/disable the ultrasonic sensor and also c a n set the distance the robotic mower should stop and turn in another direction.
Rain Sensor Setting
Activate/disable the rain sensor and also can set a delay when the mower should resume work after the rain.
Multi-Area
Here you can define up to 4 different mowing areas. The “Percentage” means the expected working time in this area (the total working time can be treated as 100%). The “Distance” means the distance from the docking station along the boundary wire, to where the robot mower with turn into the lawn area. (Please notice that this function is only available on the NX series, Revola series machines).
PIN Code Reset Setting
Here you ca n change the mower PIN code, the default PIN code is: 0000 (four times zero)
About Device
Mower information will show here, including the mower name, related MAC address and also the firmware version. Via the “Update Firmware” button, the mower will check if there is a latest version which need be upgraded.
Notifications
When active, if the APP crashes all APP errors, are automatically forwarded to the manufacturer for optimization purposes.
Documents / Resources
 | CloudHawk App |
References
- User Manualmanual.tools
l application ne fonctionne plus
The CloudHawk application is no longer working.
If the Yard Force CloudHawk app is not working, please try the following troubleshooting steps based on the manual:
If the app continues to crash, the manual notes that error reports are automatically forwarded to the manufacturer for optimization if the notification setting is active.
For further assistance, you can use the Explore as Guest mode in the app to access the FAQ section specific to your mower model or view Product videos for visual setup guidance.
Note: If the app fails to open entirely, try clearing the app cache or reinstalling the application from your mobile app store.
Read the full Q&A page
impossible de me connecter a bloostou
impossible de remettre les paramètres usine
de yaerd force mb800
impossible de remettre les paramètres usine
de yaerd force mb800
How do I connect to Bluetooth and perform a factory reset on the Yard Force MB800?
For the Yard Force MB800, please follow these instructions based on the CloudHawk App manual:
0000.If you are unable to access the mower at all due to a lost PIN, you may need to contact Yard Force support directly as a manual factory reset procedure is not detailed in the app guide.
Read the full Q&A page
Bonjour,
J’ ai rentré mon robot sur l’ application et au bout de 2 jours l’ appareil n’ y figure plus.
Quand je veux le scanne ça me dit appareil déjà existant.
Que dois je faire??
Merci.
Cordialement
J' ai rentré mon robot sur l' application et au bout de 2 jours l' appareil n' y figure plus.
Quand je veux le scanne ça me dit appareil déjà existant.
Que dois je faire??
Merci.
Cordialement
Why did my robot disappear from the CloudHawk app, and why does it say 'device already exists' when I try to re-scan it?
If your robot has disappeared from the app but gives an "already existing device" error when you try to re-scan it, it usually means the device is still registered to your account on the server side but is not displaying in the local app interface. Please try the following steps:
If the device still does not appear in your list, you may need to contact Yard Force support to have the serial number manually unlinked from the server so you can register it as a new device again.
Read the full Q&A page