XTEINK Neo E-reader Instructions

XTEINK Neo E-reader

WHAT’S IN THE BOX

Package includes

1. Neo E-reader × 1
2. microSD Card × 1 (pre-installed in the microSD card slot)
3. Adhesive Metal Rings × 2
4. Screen Protector × 1
5. Pogo-pin-to-USB-C Adapter × 1
6. Quick Start Guide × 1

Charging safety:

• Use a charger that meets applicable safety certification requirements.
• While charging, keep metal and other conductive objects away from the Pin contacts to prevent short circuits.

DEVICE OVERVIEW

Press the Power button to begin your reading journey. (Refer to the sample illustration for the presentation style.)

1. Reset
2. Previous Page
3. microSD card
4. Next Page
5. . Power On/Off
6. Home Button
7. Lanyard Hole
8. Magnetic Charging Port
9. Charging Indicator Light
10. Built-in Magnet
    Charging: Red Light
    Fully charged: White light
11. Magnetic Alignment Strip

GET STARTED

SCAN TO OPEN THE XTEINK APP AND VIEW THE DIGITAL USER MANUAL.

With the XTEINK App, you can:

1. Wirelessly transfer e-books, comics, wallpapers, and fonts;
2. Sync reading progress to the App and receive periodic reading reports;
3. Explore the wallpaper community, the points store, and more.

First Use
Note: The interface may change with system updates. Refer to the actual screen.

• Step 1 | Charge the device
  Charge the device for at least 30 minutes before first use.
• Step 2 | Open Settings
  Tap the “More” icon in the upper-right corner, then select “Settings”.
• Step 3 | Connect to a network
  Select “Network & Connection” and complete Wi-Fi setup.
  Note: The device supports 2.4 GHz Wi-Fi only. When using a mobile hotspot, enable “Compatibility Mode” on your phone.
• Step 4 | Update the system
  After connecting to Wi-Fi, open “About Device” to check for and install system updates. Once the update is complete, the device is ready to use.
  Note: Keep the battery level at 20% or higher and maintain a stable network connection during the update.

PRODUCT, SAFETY AND REGULATORY INFORMATION

SAFETY PRECAUTIONS
This product contains a lithium-ion rechargeable battery. For safe use, please strictly observe the following:

1. Do not disassemble, modify, or repair this product.
2. Do not put it in fire or heat it.
3. Do not use, store, or charge it in places exposed to high temperatures, such as in direct sunlight, inside a car, or near heating appliances.
4. Do not get it wet or use/store it in humid places.
5. Do not drop it or subject it to strong impacts or pressure.
6. If any abnormalities such as overheating, unusual odor, discoloration, deformation, or smoke occur during charging, immediately stop charging and cease use.
7. When charging, use the included charging cable and connect it to a rated power source.
8. While charging, do not cover or place the product near flammable materials such as blankets or paper.
9. When disposing of this product, follow your local government’s instructions and dispose of it properly as electronic equipment containing a lithium-ion battery.

SAFETY, REGULATORY AND WARRANTY INFORMATION

Important safety, regulatory and warranty details about your Xteink eReader can be found on the Xteink website at:

• https://www.xteink.com/pages/support

If you need assistance, please contact the appropriate support team based on yourpurchase channel:

• Official Website Orders: support@xteink.com
• Amazon & TikTok Shop Official Store Orders:
• help@xteink.com

FCC Compliance Information
Warning:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However. there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

NOTE:
This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

ISED Warning
This device complies with Innovation, Science and Economic Development Canada’s licence-exempt RSSs. Operation is subject to the following two conditions:

1. This device may not cause interference; and
2. This device must accept any interference, including interference that may cause undesired operation of the device.
   The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Specification

• XTEINK Neo
• Model: XTEINK Neo
• Pocket-Sized Magnetic E-Reader
• Power Supply: 5V 0.5A
• Designed by XTEINK
• www.xteink.com
• Contact: support@xteink.com

Manufacturer

• Shenzhen Xiaohu Xingtong Technology Co.,Ltd.
• Room 1209, Yichuang International Center, Building 2B, No. 8, Golf Avenue, Guangpei Community,
• Guanlan Street, Longhua District, Shenzhen, China