XIRGO KP2 SmartWitness Cloud Dash Camera User Guide

Driver-facing camera (Product SKU:
KP2-DFC-S)
Description: A modular insert to monitor in-cabin behavior.
Plug-and-play functionality. Enhanced visibility is that easy.
KP2 Remote Driver-Facing Camera (Product SKU:
KP2-INTCAM-REM)
Description: Replaces the KP2-DFC snap-in camera for
interior/driver-facing video — enabling the KP2’s driver-facing
camera to be moved to ideal vantage points in vehicle cabs
independently from the KP2.
OBDII (data) power adapter cable (Product SKU:
KP2-OBDII-DATA)
Description: Provides accurate trip detection and vehicle speed
data for onboard processing. Supports connection to JBUS ports with
a splitter cable.
OBDII (without speed & RPM) power adapter cable
(Product SKU: KP2-OBD-PWR)
Description: Uses your vehicle’s OBD port to apply power to your
KP2. Cost-effective and quick self-installation method.
Cigar power adapter cable (Product SKU:
KP2-CIG-PWR)
Description: Allows easy transfer of KP2 between vehicles without
professional installation. Requires a common female cig port.

Get to Know the KP2

Panic button
Bluetooth pairing & G-sensor calibration button
LED types: Warning LED (RED), Record LED (BLUE), Network LED
(GREEN)
Nano SIM slot (4FF), microSD card slot

Product Usage Instructions

Installation

Please refer to the installation materials provided before using
your KP2. Ensure the mounting bracket is securely attached using
the provided cables and clips. Insert the nano SIM card into the
designated slot and connect the power cable.

Key Functions

The KP2 features a panic button for emergencies, Bluetooth
pairing for connectivity, and G-sensor calibration for accurate
recordings. The LED indicators show warning, recording, and network
status.

Driver Safety Warnings

It is important to follow all driver safety guidelines when
using the KP2. Avoid distractions and ensure proper installation to
minimize risks while driving.

GPS Reception

The KP2 relies on GPS reception for accurate location tracking.
Ensure the device has a clear view of the sky for optimal
performance.

FAQ

How do I access recorded footage?

To access recorded footage, remove the microSD card from the KP2
and insert it into a compatible device such as a computer or card
reader.

Can I use a different SIM card with the KP2?

We recommend using the provided nano SIM card for optimal
compatibility and performance with the KP2.

“`

View Fullscreen

VIDEO TELEMATICS
KP2
USER GUIDE
VERSION 5 | LAST UPDATED 3/25/2025
Please read this entire guide and refer to our installation materials before using your KP2. xirgo.com

KP2
USER GUIDE

TABLE OF CONTENTS Package contents …………………………………………………………3 Optional accessories ……………………………………………………4 Get to know the KP2……………………………………………………5 Key functions…………………………………………………………………7
Automatic booting …………………………………………………….7 Video recording………………………………………………………….7 G-sensor calibration ………………………………………………….7 Bluetooth® panic button……………………………………………8 Enable pairing …………………………………………………………….8 How to pair with the KP2 …………………………………………8 Supercapacitor (emergency power)………………………..8 ADAS functions …………………………………………………………..9 DMS functions ………………………………………………………….. 10

Driver safety warnings …………………………………………… 11 GPS reception……………………………………………………………. 12
Improve your signal……………………………………………….. 12 Reception may be impaired …………………………………. 12 LED & buzzer specifications…………………………………… 13 Technical specifications ………………………………………….. 14 Installation resources………………………………………………. 15 Configuration tool ……………………………………………………. 16 SD viewer software………………………………………………….. 17 Technical support & warranty ……………………………….. 18 Safety advice & FCC regulations…………………………… 19 KP2 ADAS disclaimer……………………………………………… 20

Please read this entire guide before installation and use.

XIRGO | KP2 USER GUIDE XIRGO | KP2 USER GUIDE

PACK AGE CONTENTS
KP2 VEHICLE RECORDER

Mounting bracket & attached power cable (Connects to adapter cables)

Removable wedge block (Driver-facing camera ordered separately)

Torx® wrench

8″ 3-wire adapter cable (Connects to bracket cable)

Square adhesive cable clips (x5)

· 64GB microSD card (pre-installed) · Larger capacities available upon request

Nano SIM card (Pre-installed)

Double-sided 3MTM tape (One adhered to bracket, one extra piece)

Alcohol prep pad (x2) 3

XIRGO | KP2 USER GUIDE

OPTIONAL ACCESSORIES
At Xirgo, we give our partners multiple options when selecting their preferred power application and camera configuration. The items mentioned below are compatible with the KP2 and offer different benefits or trade-offs when employed with your device.
For more details on prices and ordering options, please contact your Xirgo Account Manager or email us at support@xirgo.com.

ACCESSORY
Product SKU: KP2-DFC-S
Product SKU: KP2-INTCAM-REM
Product SKU: KP2-OBDII-DATA
Product SKU: KP2-OBD-PWR
Product SKU: KP2-CIG-PWR

NAME & DESCRIPTION
Driver-facing camera Description: A modular insert to monitor in-cabin behavior. Plug-and-play functionality. Enhanced visibility is that easy.

USE CASE
· Increased awareness of in-cabin incidents.
· Partners prefer full access to current and future DMS features.

BENEFITS
· Access to DMS capabilities.
· DFC auto-calibrates your driver’s head position.
· Gain actionable insight into driver negligence for precise driver coaching.

KP2 Remote Driver-Facing Camera
Description: Replaces the KP2-DFC snap-in camera for interior/driver-facing video — enabling the KP2’s driver-facing camera to be moved to ideal vantage points in vehicle cabs independently from the KP2.

· Larger cabs
· Unusual installation scenarios
· Vehicle interiors blocking standard placement of KP2’s driver-facing camera

· Boosts installation flexibility while maintaining support for KP2’s driver monitoring features
· Includes auto-switching infrared night vision
· Cable can be extended

OBDII (data) power adapter cable
Description: This is a 15-minute self-install that provides most accurate trip detection and vehicle speed data for onboard processing. Also supports connection to JBUS ports with a splitter cable.

· Vehicles with OBDII port access.
· Partners prefer vehicle-based speed to inform ADAS calculations.
· Self-installation required.

· Gives greater insight into your vehicle’s true speed and other valuable data streams.
· No professional install required.

OBDII (without speed & RPM) power adapter cable
Description: Like the OBDII (CAN) adapter, this 15-minute self-install uses your vehicle’s OBD port to apply power to your KP2.
Save money with quicker self-installation and a cheaper power supply method.

· Vehicles with OBDII port access.
· Self-installation required.
· Cheap power application and self-install are of greater need than CAN-enabled features.

· You still receive DMS features with a DFC.
· Lower price than the OBDII (DATA) cable.
· No professional install required.
· Maintain access to ADAS functions through GPS-based speed.

Cigar power adapter cable
Description: Move your KP2 around from vehicle to vehicle without professional installation. Common female cig port required.
An easily transferable and deployable installation solution.

· Temporary vehicles. · Rental vehicles.
· Vehicles with hard install prohibited.
· Vehicle Testing. Test many vehicles in a short period.
· Self-installation required.

· Applicable to different types of vehicles.
· No professional install required.
· Maintain access to ADAS functions through GPS-based speed.

XIRGO | KP2 USER GUIDE
GET TO KNOW THE KP2
FRONT

Panic button
Bluetooth pairing & G-sensor calibration button

SIDE COVER OPEN
Release tab

LED types: Warning LED (RED) Record LED (BLUE) Network LED (GREEN)
Optional Driver-Facing Camera (Model: KP2-DFC-S)
Nano SIM slot (4FF) microSD card slot
5

XIRGO | KP2 USER GUIDE
GET TO KNOW THE KP2

BACK

Lens angle lock

Road-facing camera lens

SIDE

Windshield bracket

Unscrew the right-side bracket. Remove the KP2 from the bracket to adjust camera angle or insert/remove SIM/micro SD card.

Applied screws for design purpose only.

XIRGO | KP2 USER GUIDE
KEY FUNCTIONS
Automatic booting Once you’ve wired your KP2 to the vehicle’s power source, the KP2 will turn on and begin recording after about 30 seconds.
1. Video recording
CONTINUOUS RECORD This is the default mode for recording. Your KP2 begins recording after booting up and continues to record the entire time the device is on. In this mode, the SD card storage may fill up quicker and overwrite your oldest recordings when it’s full. You may configure your resolution settings using the KP2 Configuration Tool. Avoid losing data by backing up driver data on separate storage or PC after incidents.
DUAL RECORD, CONTINUOUS + EVENT Continuous record files will be stored in the “Normal” folder, and event record files will be stored in the “Event” folder on the SD card.
EVENTS Set audible alerts on the KP2 when specific events trigger (like tailgating). You can choose either a natural language voice or a beep sound. Instant notifications of events can be uploaded to the server simultaneously. Events can also activate a masking mode, where the audio and/or video recording is disabled when the event occurs. For example, geofence events can automatically turn off video/audio recording when the vehicle enters a secure or private area (such as a government facility or home).
DRIVE DATA DRV data (drive data) will record driving information regardless of events. DRV files consist of GPS, G-sensor, ADAS/DMS and OBD data. DRV files overwrite your device’s oldest data. DRV files upload to the server every 10 minutes by default but can increase to every minute.
2. G-sensor calibration
1. Install your device, and park the vehicle on a flat surface. 2. Turn on the device. 3. Press the small, black button for 3 seconds. 4. Calibration confirmed with an audible alert.
7

XIRGO | KP2 USER GUIDE
KEY FUNCTIONS (CONTINUED)
3. Bluetooth® panic button
Please get in touch with Xirgo or your supplier to buy a Bluetooth panic button for your KP2. ENABLE PAIRING To enable Bluetooth pairing for your panic button, change the following KP2 Configuration Tool settings in Info > Service: · Select “Flic” in the Bluetooth Panic field · Select “Panic Button” in the Bluetooth Button Function field Your Bluetooth panic button won’t work if you don’t turn these settings on. HOW TO PAIR WITH THE KP2 Red LED = Warning, Blue LED = Record, Green LED = Network 1. Make sure the KP2 is on and the blue LED is solid. 2. Press and hold the small, black button on the device. Warning and Record LEDs will blink. This means
the device enters pairing mode. 3. Press and hold the external BT button for 7 seconds. Afterward, your Warning and Record LEDs will revert to the previous mode. You have completed pairing your KP2 Bluetooth panic button.
4. Supercapacitor (emergency power)
When device power is interrupted, your KP2 creates the last recording using a built-in supercapacitor.
8

XIRGO | KP2 USER GUIDE
ADAS FUNCTIONS
Your KP2’s Advanced Driver Assistance Systems (ADAS) features allow drivers to receive in-cabin preventive audio alerts in cases of potential incidents.

!
LANE DEPARTURE WARNING (LDW) Your vehicle crosses a solid lane line
on either side of the road.
!
HEADWAY MONITORING WARNING (HMW) Your vehicle is not maintaining a safe distance
with the vehicle in front of you (tailgating).

!
FORWARD COLLISION WARNING (FCW) Your vehicle is likely to collide with something in front of the vehicle.
!
PEDESTRIAN DETECTION (PD) Pedestrian is in vehicle’s path.

CAUTION During your KP2 settings calibration, remember that Camera Height is integral to proper ADAS functionality. Therefore, when you input your measurements, please abide by the guidance in the KP2 Installer App. ADAS functionality is not a substitute for an alert, trained and engaged driver. ADAS functionality will be impaired by many things, including but not limited to device malfunction, obstruction of the device’s image sensor, intense weather conditions that reduce the visibility afforded to the device’s image sensor, and poor and/or faded road and lane striping/markings.
9

XIRGO | KP2 USER GUIDE
DMS FUNCTIONS
Your KP2’s Driver Monitoring System (DMS) functions allow drivers to receive audible alerts for driver distraction and fatigue. The following DMS events are configurable in your KP2:

DRIVER DISTRACTION WARNING (DDW)
Driver’s head faces away from the road for a prolonged period of time.

PHONE AT EAR DETECTION (PED)
Driver faces away from road, signaling distracted state.

DRIVER FATIGUE WARNING (DFW)
Driver is yawning and/or has prolonged eyelid closure.

XIRGO | KP2 USER GUIDE
DRIVER SAFETY WARNINGS

DISCLAIMER The KP2 is not a substitute for a safe, conscientious driver. The KP2 cannot compensate for a driver who is distracted, inattentive or impaired by fatigue, drugs or alcohol. Whether or not the KP2 is in use, it is always the driver’s responsibility to take appropriate corrective action. It does not eliminate or decrease the need for a driver to stay alert and obey all traffic laws while operating a vehicle. Never wait for the device to provide a warning before taking measures to avoid an accident. Failure to do so can result in serious personal injury, death or severe property damage.
Always, it is the driver’s responsibility to: · Use safe driving techniques · Exercise proper judgment · Maintain a safe speed and distance between vehicles · Take measures to avoid an accident · Comply with all applicable laws and regulations
The driver and front passenger must always be correctly seated with seat belts fastened when operating the vehicle to reduce the potential danger of injuries.

OPERATIONAL CONCERNS In certain conditions, including inclement weather, low visibility and precarious road conditions (including poor lane markings, construction zones, dirt roads, heavy or complicated traffic, and curvy and winding roads), your KP2 may have limited to no functionality.
The KP2 may not detect objects such as motorcyclists, bicyclists or pedestrians even in ideal conditions. Always keep the lens and view of your KP2 unobstructed and adequately calibrated to not inhibit camera functions.
Driving in certain conditions or any interference with your KP2 can result in false, few or no warnings. Drivers must continuously monitor traffic and surroundings and take measures to avoid an accident; failure to do so can result in serious personal injury, death or severe property damage.
If your KP2 is not functioning correctly, please contact your distributor or our support and have the device inspected immediately.

Whether or not the KP2 is operational, it is the driver’s responsibility to maintain vehicle control; failure to do so can result in serious personal injury, death or severe property damage.

CLEANING ADVISORY Do not apply compressed air or cleaning solutions (e.g., Windex®) to your KP2 while cleaning the device or vehicle cab. Usage of these products may damage the device.

XIRGO | KP2 USER GUIDE
GPS RECEPTION
When satellites don’t have line of sight, cellular towers help triangulate a vehicle’s location.

IMPROVE YOUR SIGNAL 1. Activate your KP2 in an area
without large buildings. 2. The optimum operating
temperature for your vehicle’s GPS is -10° C~50° C 3. When first using your KP2 or turning it on after a period (>3 days), allow more time to recognize your current location.

RECEPTION MAY BE IMPAIRED: 1. If there is an object at the end of the GPS antenna. 2. If your vehicle has metallic elements on the windshields. 3. If you install equipment generating electromagnetic waves that
interfere with the GPS signal in the vehicle (e.g., Other GPS devices like certain wireless activated alarms, MP3 and CD players and camera alarms use GPS.) 4. If you use a receiver connected by cable. You can avoid electric interference by changing the receiver’s location (antenna). 5. On heavily overcast or cloudy days if the vehicle is: · In a covered place such as under a bridge or raised roadway · In a tunnel · In an underground roadway or a parking area · Inside a building or garage · Surrounded by high-rise buildings 6. If GPS signal reception is poor. It may take longer to locate your current position when the vehicle is moving than when it’s stationary.

XIRGO | KP2 USER GUIDE
LED & BUZZER SPECIFICATIONS

STATUS/STEP

Warning Red

Startup & power off
Record
Communication Function Warning Error
Event trigger ADAS DMS

Booting step 1

Booting step 2

Booting step 3

Booting finished

Power off

Power off/finished

Continuous record Recording

Event record

Standby Recording

Dual record

Continuous recording
Event recording

No record

No recording

4G LTE network device ready

Communication

SD format

G-sensor calibration

FW upgrade

System warning

SD card full Video loss

Record error

SD error, no SD, write fail

4G LTE network device error, SIM error

Communication error

Data network connection error
DMS communication error

G-sensor, panic button, alarm-in

Over speed

Lane Departure Warning (LDW), Forward Collision Warning (FCW), Headway Monitoring Warning/ Tailgating (HMW), Pedestrian Detection (PD)
Driver Fatigue Warning (DFW), Driver Distraction Warning (DDW), Phone at Ear Detection (PED)

On On On On Off Off Off Fast on and off On Slow on and off
–
–
–
–

LED Record
Blue

Communication Green

Off

On and off

Off

On and off

Fast simultaneous on and off

Off

–

Fast on and off

–

Fast on and off

–

Off

–

Sequence on and off

–

Double sequence on and off

Off

–

Off

–

Sound –
Beep no. 2 –
–
Continuously beep no. 2 Beep no. 2 Beep no. 3 –
Beep no. 3

Off

–

Slow on and off

–

Slow on and off

–

Beep no. 1

–

Beep no. 4 (2 times)

–

Warning beep or voice

–

Warning beep or voice

XIRGO | KP2 USER GUIDE
TECHNICAL SPECIFICATIONS

MECHANICAL Dimensions Weight Image Sensor
Angle of View ELECTRICAL Power Input Power Consumption Delayed Power Shutdown
Supercapacitor PC Software Video Resolution Recording Speed Recording Mode Memory
LED ENVIRONMENTAL Operational Temperature Storage Temperature COMMUNICATIONS Connectivity
Wireless
Speaker Audio
ADAS Event Types
DMS Event Types
POSITIONING GNSS G-sensor Gyro Time COMPLIANCE Certification/Regulatory Warranty

82mm W x 126mm H x 64mm D/3.2″ W x 5.0″ H x 2.5″ D 232.4 g (including 2nd camera, excluding power cable) 2 Megapixel CMOS Sensor
Main, Road-Facing Camera (forward-facing): 140° (115°(H), 60°(V)) Optional Driver-Facing Camera: 130° (104°(H) x 56°(V))
DC 12V/24V, 1.5A 4W (6W with ADAS and DMS enabled) Supports Delayed Power Shutdown and Automated Wake-Up Feature (selectable intervals) Enables Recording of Last File and Safe Shutdown (selectable intervals) MSM8953, Octa-Core ARM Cortex-A53 Main Camera: 1080p (1920×1080), 720p (1280×720) 2nd Camera: 1080p (1920×1080), 720p (1280×720) 60 FPS (30 FPS per channel) Continuous, Event, Dual Mode 16GB eMMC+2GB LPDDR3, 64GB MicroSD Card Included. Supports up to 256GB (FAT32) 3 (red, blue, green LED)
-10° C~+55° C -20° C~+70° C
4G/LTE (CAT 6) LTE CAT6 (NA): B2/B4/B5/B7/B12/B13/B14/B17/B25/B26/B41/B66/B71 3G Bands: B2, B4, B5 LTE CAT6 (GB): B1/B2/B3/B4/B5/B7/B8/B20/B28/B38/B40/B41 3G Bands: B1, B2, B4, B5, B8 Wi-Fi: 2.4/5GHz, 802.11a/b/g/n/ac Bluetooth: 4.2 BLE Audible Alerts for Events and Audio for ADAS and DMS. Natural Language or Beep Sounds (selectable) Internal Microphone Headway Monitoring Warning (tailgating) Forward Collision Warning Lane Departure Warning Pedestrian Detection
Fatigue Distraction Phone at Ear Detection
GPS/GLONASS Internal 3-Axis G-sensor 3 Axis (X,Y,Z), Output Rate: 100 Hz
GPS Time Sync + Built-In Real-Time Clock (RTC)
FCC, AT&T, Verizon, CE, E-Mark, UKCA, IC, PTCRB, RCM, FirstNet, RoHS 2-Years Standard
14

XIRGO | KP2 USER GUIDE
INSTALLATION RESOURCES
Please follow the links below for access to KP2 installation materials. The Installation Video and Quick Start Guide feature self-installations that require additional power adapter accessories. The Installation Guide is designed for professional 3-wire installation.

Access the KP2 Installation App

VIDEO TELEMATICS

Standard Kit (w/Optional OBDII Data Adapter Cable) 1. Review the package contents.

Quick Start Installation Guide
For KP2 Video Telematics Camera

A. KP2 Camera, Mounting Bracket and Attached Bracket Power Cable
B. 3MTM Adhesive Tape C. Alcohol Pads D. Clips E. Torx® Wrench F. Optional: OBDII
Data Adapter Cable (Connects to A) — Sold Separately

Access the KP2 Installation App

Quick Start Installation Guide
For KP2-INTCAM-REM Accessory
KP2-INTCAM-REM replaces the KP2-DFC snap-in camera for interior/driver-facing video. We recommend installing the KP2-INTCAM-REM before using the KP2 Installation App, which can help aim cameras for best visibility and performance.

Access the KP2 Installation App

KP2
PRO INSTALLATION GUIDE
VERSION 8 | LAST UPDATED 2/17/2025
Please read this entire guide and refer to our installation materials before using your KP2. xirgo.com
Download KP2 Pro Installation Guide

2. Scan the QR code inside the box for a detailed installation video, spec sheet and user guide.

3. Watch the installation video. Refer to proper camera installation guidelines here.

4. Use wipe to clean the window. Allow time to dry. To determine compliant device placement, check local regulations.

5. Remove backing. Press evenly to ensure the mounting bracket’s
aaaaaddddaHdhhhhdheeoeehesslssdesiiiivvvvisteveeeioveiiieiswsssisiffifsfllnlfluuulufduslsssuoshhhhswhaahaaaggfggaogaaaagraiiiinann3ninissssn0sttttststtthhethhtheeceeheoeggggngllllgaadaalalsssssass.sss..s….

6. Remove adhesive and apply cable clips to windshield. Slide the bracket power cable into clips.

7. Tuck cable behind weather stripping, and push stripping in to secure it.

8. At the end of the bracket cable (A), connect the terminal to the smaller end of the adapter cable (F).

9. Plug end of OBDII adapter cable
into vehicle’s OBDII port. Ensure vvvveveeeehhhvhhiieiiccccihclllleeieelceiiliissessisooioosonnnnonaaanaafffaflllflaaalafattlttatsssstsuuuusurrrruffrffaarfaaafccccaceeeeceeffffoofooforrorrrr
G-sensor and device calibration.

10. Turn on vehicle. Check that blue and green lights remain on after 5 minutes. If not, an error
333333ssssseseeeececobcccococuooonocntnnndutndddodsrdssnrss.se….Af.dAAAoAA.brbPbbbe3beereeeeeseeepeseppppspccccocscocoonmoononndnnfanfifsffilirfiil.rrirm,rmrAmmmbmslssbsasseckep confirms G-sensor calibration.

11. Scan the QR code above, and download the iOS or Android KP2 installation app.

12. Open the KP2 installation app, FFFFFoFooooollllllolloooloowabwwwnwottdtxthhhth’hesseeeecdlddadadeeebenvevvevivtiicilcchci.eceeeFeeccoccIocMoloolononnnEnfwfffiIiifgiggigcgutuuouhurrrdraeaaraeattttdiiitoiooooieonnnnnvnpipptpcprhrreroooroeommmmmpppppttttssstss…..
configuration prompts.

xirgo.com

Proceed to next page for device calibration

Download Quick Start Guide

1. Select the installation location.* For best DMS performance, orient the camera as close as possible to a head-on view of the driver’s face, mounted slightly above the eyeline, accounting for different driver heights.

2. Prepare surface with alcohol cleaning wipe and allow time to dry.

3. Remove adhesive pad backing and apply to mounting surface. Press evenly to ensure adhesive is flush against surface. Hold for 30 seconds.
adhesive is flush against the glass.

4. Route cable to the KP2 using cable clips, repeating use of alcohol wipe to clean surfaces.

5. Adjust camera angle as needed. Use the locking wheel on top to loosen/tighten the horizontal rotation, and the included hex driver to loosen/tighten the side screws for vertical rotation.

vehicle is on a flat surface for

Note: When using DMS with KP2-INTCAM-REM, review KP2 configuration to ensure accurate event generation. Driver position parameter may need to be adjusted from nominal (left/center/right-hand drive). * Suggested locations include the headliner and adjacent to A-pillar. Be certain to avoid sun visors, radio handsets/cords,
and other objects. Check local regulations for placement restrictions.
© 2025 Xirgo Technologies. All Rights Reserved.

xirgo.com 3 seconds. A beep confirms

Follow the device configuration prompts.

xir4628-0425

Download Quick Start Guide

Watch KP2 Installation Video

WARNING Xirgo installations should be performed by a qualified individual or installation professional only. Working with a vehicle’s power system can be dangerous to both you and your vehicle. This installation is intended only to be a guide since vehicle designs and power/input sources can vary significantly from vehicle to vehicle.
15

XIRGO | KP2 USER GUIDE
CONFIGURATION TOOL

KP2 CONFIGURATION TOOL The KP2 Configuration Tool allows you to further customize your KP2 device settings. If you wish to make specific calibration changes, please follow this link to download the software and gain access to supplemental documentation.

PC REQUIREMENTS Recommended settings for optimal configuration tool compatibility:

OS CPU RAM Interface HDD Free Space
Display

Windows 7/8/8.1/10 or higher
Core 2 Duo 2.5GHz or higher 2GB or higher
SD memory card reader Install: 55MB or higher Backup: 4GB or higher 1024 x 768 pixel/true color or higher

If your PC doesn’t meet these requirements, the KP2 configuration software may not function properly.

XIRGO | KP2 USER GUIDE
SD VIEWER SOFTWARE

SD VIEWER SOFTWARE Xirgo’ SD Viewer Software gives you access to enhanced video playback, editing and review. Please follow this link to download the software and gain access to supplemental documentation.
PC REQUIREMENTS Recommended settings for optimal SD Viewer Software compatibility:

OS CPU RAM Interface HDD free space
Display

Windows 7/8/8.1/10 or higher
Core 2 Duo 2.5GHz or higher 2GB or higher
SD memory card reader Install: 55MB or higher Backup: 4GB or higher 1024 x 768 pixel/true color or higher

If your PC doesn’t meet these requirements, the SD Viewer Software may not function properly.

XIRGO | KP2 USER GUIDE
TECHNICAL SUPPORT & WARRANTY
TECHNICAL SUPPORT For technical support, please contact your local distributor or visit our Support Portal and submit a support ticket. You can also email us at support@xirgo.com or call our support team: NORTH AMERICA, SOUTH AMERICA, APAC +1 312-981-8774 EMEA +44 (0) 1483 397005 HAAS AND LIMITED WARRANTY If you are under our Hardware-as-a-Service (HaaS) Warranty, please contact support to understand the coverage of your subscription. This product is supplied separately with a 2-year limited hardware warranty. The warranty excludes products that have been misused (including accidental damage) and damage caused by normal wear and tear. In the unlikely event that you encounter a problem with this product, it should be returned to the place of purchase.
18

XIRGO | KP2 USER GUIDE
SAFETY ADVICE & FCC REGULATIONS

FCC PART 15.19 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC PART 15.21 Any changes or modifications (including the antennas) to this device that are not expressly approved by the manufacturer may void the user’s authority to operate the equipment.
FCC RF RADIATION EXPOSURE STATEMENT This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.

CAUTION To reduce the risk of electric shock, do not remove cover. No user-serviceable parts inside. Refer servicing to qualified service personnel.
Please make sure you follow the safety advice/instructions given in the user guide.
CAUTION Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. Battery for real-time clock (RTC) inside.
CAUTION Install the product where it does not block driver’s visibility and where there is no air bag installed. This could cause an accident or might injure passengers in case of accident.
WARNING: To prevent fire or electric shock hazard, do not expose this appliance to rain or moisture.
CAUTION Damages due to production malfunction, loss of data or other damages occurring while using this product shall not be the responsibility of the manufacturer. Although the product is a device used for recording videos, the product may not save all videos in the case of a malfunction. In the case of an accident, the sensor may not recognize the shock when the impact is light, and as a result, it may not begin recording automatically.
CAUTION Please make sure you follow the safety advice/instructions given in KP2 instruction materials.

XIRGO | KP2 USER GUIDE
KP2 ADAS DISCLAIMER
To properly activate and utilize KP2’s ADAS features, Xirgo recommends installation using OBDII data or, JBUS connection. Vehicle-sourced speed data retrieval through these means is integral to accessing vehicle speed for precise ADAS notifications. For installations (ex: 3-wire or cigarette adapter) without vehicle data retrieval or in instances where speed is unobtainable from the vehicle, KP2 defaults to GPS speed measurement in the operation of ADAS features. In this case, vehicles must surpass a speed threshold to trigger ADAS functions. This threshold is distinct from other speed thresholds used to configure ADAS events. Please contact your Xirgo integration team to learn about specific values for different event types. Below these thresholds, and in cases where vehicles without vehicle-sourced speed data encounter GPS signal “dead zones” like parking garages and highway tunnels, loss of ADAS function is expected. If you enable ADAS features on a KP2, you assume full responsibility and indemnify Xirgo for any incidents directly correlated with ADAS efficacy, malfunction or delays.
20

xirgo.com

Documents / Resources

XIRGO KP2 SmartWitness Cloud Dash Camera [pdf] User Guide
KP2, KP2 SmartWitness Cloud Dash Camera, SmartWitness Cloud Dash Camera, Cloud Dash Camera, Dash Camera

References

User Manual

Leave a comment

Cancel reply