RC604MG1 Smart Projector L1
“
Specifications
- Product Name: Xiaomi Smart Projector L1
- Projection Technology: DLP
- Resolution: 1920 x 1080 pixels
- Brightness: 900 ANSI lumens
- Contrast Ratio: 5000:1
- Ports: HDMI, USB, DC IN
- Remote Control Range: Up to 5 meters
Product Usage Instructions
Remote Control Pairing
To pair the remote control with the projector, ensure the
projector is powered on and within range. Press the power button on
the remote control to establish the connection.
Adjusting Image Focus
To adjust the image focus, use the focus adjustment dial on the
projector lens. Rotate the dial until the image is clear and
sharp.
Image Correction
If the image appears distorted, utilize the keystone correction
feature on the projector to adjust the image shape and ensure a
properly aligned display.
Auto Obstacle Avoidance
The projector is equipped with auto obstacle avoidance
technology to prevent collisions or obstructions during operation.
Ensure there are no objects blocking the projection path.
Auto Screen Alignment
Activate the auto screen alignment feature to automatically
adjust the projection angle and ensure a perfectly aligned image on
the screen.
Projection Distance & Screen Dimensions
Refer to the user manual for recommended projection distances
based on desired screen dimensions. Adjust the projector position
accordingly for optimal viewing experience.
FAQ
How do I turn on the Xiaomi Smart Projector L1?
When connected to the power supply, press the power button on
either the projector or the remote control to turn on the
device.
How do I turn off the projector?
To turn off the projector, press the power button on either the
projector or the remote control to access the shutdown menu, then
select the appropriate option.
“`
Xiaomi Smart Projector L1 User Manual
Table of Contents
User Notice
2
Safety Instructions
2
Product Overview
4
Appearance
4
Ports
5
Remote Control
6
How to Use
7
Remote Control Pairing
7
Adjusting Image Focus
8
Image Correction
9
Auto Obstacle Avoidance
10
Auto Screen Alignment
10
Projection Distance & Screen Dimensions
11
Specifications
12
Troubleshooting
13
Regulatory Compliance
14
1
User Notice
Thank you for choosing the Xiaomi Smart Projector L1. Read this manual carefully before use, and retain it for future reference. Illustrations of product, accessories, and user interface in the user manual are for reference purposes only. Actual product and functions may vary due to product enhancements.
Safety Instructions
Before using the product, make sure to carefully read the following safety instructions.
This warning symbol informs the user that this product contains non-insulated voltage sources that can cause an electric shock. Coming into contact with any internal component may result in an electric shock. This symbol informs the user about important handling and maintenance related information. Please read this information carefully to ensure proper use.
This symbol informs the user to be aware of high temperatures.
This symbol informs the user to avoid touching this part.
Transportation Instructions: It is recommended to transport this projector in its original or similar packaging. 2
Preventing Electric Shocks and Fire Hazards:
Only use the provided genuine power adapter. Unplug the projector from the electrical outlet during thunderstorms or when it is not being used for a long time, so as to avoid damage caused by a power surge or lightning strike. Do not place any flammable objects near this projector so as to avoid fire. Do not block any of the vents as this may cause heat build-up inside the projector, and possibly result in a fire. Do not block the lens when the projector is turned on. Any object placed close to the lens may get very hot and/or deformed, and may even cause a fire.
Safety Precautions:
Do not place this projector on an unstable platform, stand ortable so as to preventit from falling and causing serious damage or personal injury. Do not look directly into the lens when the projector is turned on to avoid eye damage. Do not a empt to disassemble this projector as it may contain dangerous high voltage components. This projector must only be maintained and repaired by a qualified or authorized technician. Do not expose this projector to rain or moisture (operating humidity is 20%80%). Do not immerse this projector in, nor expose it to water or other liquids. Immediately unplug the projector if any liquid or object got into its housing, and have it checked by a qualified technician before using it again. Do not place this projector in any of the following environments: · In poorly ventilated or narrow spaces. · Near devices that produce a strong magnetic field. · In direct sunlight. · In extremely hot, cold or humid environments. · Close to a fire alarm.
3
Product Overview
Appearance Projector Lens
Camera
Air Inlet
Air Outlet Ports
Speaker Rubber Feet
Power Bu on (Press to turn on the projector)
4
Nut Hole for Mounting Bracket ((1/4 inch, depth < 8 mm))
Caution:
Do not look directly into the projection lens to avoid eye damage as this projector emits strong light during use. Do not place any objects within a range of 20 cm around the air inlet and outlet to avoid affecting the heat dissipation and causing damage or posing hazards. If mounting is required, please purchase a compatible mounting bracket with screws meeting the following specifications: a diameter of 1/4 inch and a length of less than 8 mm. Retain the original packaging for future storage or transportation.
Product Overview
Ports
Headphone Port
HDMI HDMI Signal Input Port
USB USB 2.0 Protocol Port
DC IN DC Port
5
Product Overview
Remote control
Power Bu on: Turn on or turn off the projector Google Assistant: You can use voice commands to instruct the Google Assistant to search for videos or streaming apps, play music, or control the projector. Navigation Bu on: Move up, down, le , or right Confirm Bu on: Press to confirm Back Bu on: Return to the previous screen Home Bu on: Return to the home screen
Se ings Bu on: Open the control panel
Netflix Bu on: Access the Netflix app YouTube Bu on: Access the YouTube app
Volume Bu on: Volume up Volume down
Note:
It is recommended to use the remote control within a distance of 5 meters from the projector. Make sure the positive and negative poles are installed correctly when placing the ba eries into the remote control. Dispose of used ba eries in accordance with local waste disposal regulations and guidelines of the country or region you live in.
Caution:
Note: Illustrations of product, accessories, and user interface in the user manual are for reference purposes only. Actual product and functions may vary due to product enhancements. The appearance or screen printing characters on the projector may vary for different sales regions. Please refer to the actual projector.
6
How to Use
Remote control pairing Turning On When the projector is connected to the power supply, press the power bu on on the projector or the power bu on on the remote control to turn on the projector. Turning Off Press the power bu on on the projector or the power bu on on the remote control to bring out the turning off menu, and select the corresponding option.
20cm
Make sure the remote control has ba eries installed and the projector is turned on.
Place the remote control near the projector, within a distance of 20 cm, and simultaneously press and hold the back bu on and the home bu on for 3 seconds to trigger the remote control pairing.
Once completed, the screen will indicate that the remote control is paired successfully.
7
How to Use
Adjusting image focus
Auto focus The auto focus function is enabled by default. When this function is triggered by moving the projector, the image focus will be automatically adjusted. Alternatively, you can select Se ings > Projector > Focus > Execute Focus, and the image focus will also be automatically adjusted. You can enable or disable the auto focus function by selecting Se ings > Projector > Focus > Auto Focus.
Manual focus
You can select Se ings > Projector > Focus > Manual Focus, and use the le and right bu ons on the remote control to manually adjust the focus.
Auto focusing……
Note: A er auto focus is completed, you can also press the confirm bu on to enter manual focus, and use the navigation bu on on the remote control to move le and right for further fine-tuning. 8
How to Use
Image correction
Auto keystone correction
The auto keystone correction function is enabled by default. When this function is triggered by moving the projector, the keystone correction will be automatically applied to the image. Alternatively, you can select Se ings > Projector > Keystone > Execute auto keystone correction, and the keystone correction will be automatically applied to the image. You can enable or disable the auto keystone correction function by selecting Se ings > Projector > Keystone.
Manual keystone correction
You can select Se ings > Projector > Keystone > Manual keystone correction, and use the remote control to adjust the image corners for correction.
The aspect ratio is optimal when the circle in the figure above isproperly displayed
Press the Confirm bu on to edit and press the Back bu on to exit Reset
Note: A er auto keystone correction is completed, you can also press the confirm bu on on the remote control to enter manual keystone correction, and use the remote control to fine-tune the image corners for correction.
9
How to Use
Auto obstacle avoidance
This function is enabled by default. During auto image correction, the projector will automatically detect and avoid obstacles in the projected area, ensuring an unobstructed and complete image. The image may zoom out based on the positions and sizes of the obstacles. You can enable or disable this function by pressing the se ings bu on on the remote control and selecting Se ings > Projector > Keystone > EasyView.
Auto screen alignment
This function is enabled by default. During auto image correction, the projector will automatically detect the screen (sold separately) and align the image with all four edges of the screen. You can enable or disable this function by pressing the se ings bu on on the remote control and selecting Se ings > Projector > Keystone > EasyFit.
10
How to Use
Projection distance & screen dimensions
D W
SD
Projection Screen
Projection Screen
Determine the distance between the projector and the screen according to the desired screen size.
Screen Dimensions (SD)
60″ 80″ 100″
120″
Projection Distance (D)
133cm 177cm 221cm
266cm
Screen Width (W)
159cm 212cm 266cm
319cm
Screen Dimensions (SD): The diagonal size of the projection screen (in inches).
Projection Distance (D): The distance between the front end of the projector and the screen (in centimeters).
Screen Width (W): The width of the image projected on the wall (in centimeters).
Note:The values in the table above are for reference only. They may slightly differ from the actual values. Please refer to the actual values. 11
Specifications
Basic Information Optical Parameters Projection Parameters
System Speaker Electrical Specifications
Name Model Item Dimensions Net Weight Display Technology Standard Resolution Throw Ratio (TR) Screen Dimensions Lens Focus Keystone Correction Built-in Storage Operating System Bluetooth Wireless Connectivity Audio Effects Speaker
Power Consumption
Others 12
Power Input Noise Level Storage Temperature/Humidity Operating Temperature/Humidity
Xiaomi Smart Projector L1 XMTYY03FMG 118*142.2*175.51mm XX kg LCD
40”120” (Recommended: 60”100”) Auto focus Auto keystone correction
Android TVTM OS Bluetooth 5.0
3 W full-range × 2
Rated power 72.0 W, standby power 0.50 W Support Auto Power Off
External power supply 19.0 V 3.79 A
30
(Theater mode at an ambient temperature of 25°C)
-20 to 55 90%RH
0 to 40 / 20%RH-80%RH
Troubleshooting
Issues No projected image Screen display error Operating system crashes Couldn’t operate with the new remote control
Remote control malfunction
The projector automatically turns off due to overheating Other internal system errors
Solutions Turn off the projector and unplug the power cord. Then, plug the power cord back in and turn on the projector. Unplug the power cord. Then, plug it back in and turn on the projector. Pair the remote control before use.
Turn off the projector and unplug the power cord. A er 5 minutes, plug the power cord back in and turn on the projector. Then, pair the remote control again.
Clear obstacles around the projector, wait for it to cool off, and turn it on again.
Contact the a er-sales service team.
13
Regulatory Compliance
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on,the user is encouraged to try to correct the interference by one or more of the following measures: –Reorient or relocate the receiving antenna. –Increase the separation between the equipment and receiver. –Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. –Consult the dealer or an experienced radio/TV technician for help.
ImportantYou are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
RF Exposure Information: The radiated output power of this device meets the limits of FCC/IC radio frequency exposure limits.This device should be operated with a minimum separation distance of 20cm (8 inches) between the equipment and a person’s body.
The Bluetooth Voice Remote has been evaluated to meet general RF exposure requirement. It can be used in portable exposure condition without restriction.
14
Product Certifications
Canada regulatory compliance This device complies with Innovation, Science and Economic Development Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1)this device may not cause interference, and (2) this device must accept any interference,including interference that may cause undesired operation of the device.
Operation in the band 51505250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems.
Exposure to radio frequency energy The radiated output power of this device meets the limits of FCC/IC radio frequency exposure limits. This device should be operated with a minimum separation distance of 20 cm (8 inches) between the equipment and a persons body.
The Bluetooth Voice Remote has been evaluated to meet general RF exposure requirement. It can be used in portable exposure condition without restriction.
CAN ICES-003 (B)/NMB-003(B)
Caution: Risk of explosion if the ba ery is replaced by an incorrect type. Disposal of a ba ery into fire or a hot oven, or mechanically crushing or cu ing of a ba ery, that can result in an explosion. Leaving a ba ery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas. A ba ery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.
15
Product Certifications
The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI Trade dress and theHDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by [Xiaomi Inc.] is under license. Other trademarks and trade names are those of their respective owners.
Dolby, Dolby Audio, and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation. Manufactured under license from Dolby Laboratories.
Google TV is the name of this device’s so ware experience and a trademark of Google LLC. Google, YouTube and Android TV are trademarks of Google LLC. Google Assistant is not available in all languages and countries. Availability of services varies by country and language.
The product label and certification information are located at the bo om of the product.
Manufacturer: Xiaomi Communications Co., Ltd. Address: #019, 9th Floor, Building 6, 33 Xi’erqi Middle Road, Haidian District, Being, 100085, China 16
Documents / Resources
 | xiaomi RC604MG1 Smart Projector L1 [pdf] User Manual RC604MG1, 2AFZZ-RC604MG1, 2AFZZRC604MG1, RC604MG1 Smart Projector L1, RC604MG1, Smart Projector L1, Projector L1 |
