Ilogo ye-V-TAC

I-V-TAC ye-LED yePlastiki yokuKhanya kweTubhu yePlastiki -

UKUKHANYA KWE-LED ENTSHA

I-LED TUBE YEPlastiki INCWADI YOMYALELO

  1. intshayelelo

    Enkosi kakhulu ngokukhetha kunye nokuthenga ityhubhu yeplastiki ye-V-TAC ye-LED. I-V-TAC iya kukunceda kakhulu, nangona kunjalo, kufuneka ufunde lo myalelo ngononophelo phambi kokuba uqalise ukufakela kwaye uwugcinele ireferensi yexesha elizayo. Ukuba unayo nayiphi na eminye imibuzo, nceda uqhagamshelane nomthengisi wethu okanye umthengisi wasekhaya othenge kuye iimveliso zakho. Baqeqeshiwe kwaye bakulungele ukukuxhasa ngeyona ndlela ingcono.

  2. Ukwethulwa kweMveliso

    Le ityhubhu yeplastiki ye-LED iqulethe i-Light Emitting Diodes (i-LED), eyona nto iphezulu kakhulu iteknoloji yokukhanyisa namhlanje, inika eyona nto ibalulekileyo yokonga amandla, ukukhuselwa kwendalo, ubomi obude, kwaye akukho kugcinwa okufunekayo. Isebenza kakuhle nge-100% kwaye iqaqambe ngakumbi kunayo nayiphi na enye into emidala.

  3. Imveliso iphelileview:

    Ukongiwa kwamandla, akukho kugcinwa, kulula ukuyifaka, ukusebenza kakuhle okuphezulu, ukusetyenziswa kwamandla aphantsi, ubomi obude be-spar ubushushu obuphantsi, kwaye akukho ilitha libi.

  4. Ukusetyenziswa kunye nokusetyenziswa:

    Le ityhubhu yeplastiki ye-LED ingasetyenziselwa kwiihotele, iiofisi, iifektri, amagumbi eenkomfa, amagumbi okuhlangana, izakhiwo zorhwebo, izakhiwo zokuhlala, izikolo, iikholeji, iiyunivesithi, izibhedlele, njl.

  5. Iimfuneko zokufakwa:
  • Ufakelo kuphela ngumsebenzi wombane oqinisekisiweyo
  • Ubushushu bendawo yokusebenza: ukusuka -20°C ukuya +45°C
  • Isiseko esifanelekileyo kufuneka siqinisekiswe kulo lonke ufakelo
  • SUKUZISEBENZISA ngeebhola ze-elektroniki
  • Sukusebenzisa umbane we-DC
  • Kunconywa ukunika amandla imveliso ngokuthe ngqo, ngaphandle kwe-ballast yombane. Ukuba amacandelo anikwe amandla nge-ballast, asinakuqinisekisa ukuqina kwawo kwexesha elide, ngoko ke iwaranti iya kuba lilize.
  1. Imiyalelo yokufaka:
    a. Cima umbane phambi kokuba uqalise!
    b. Landela lo mzobo ungezantsi:

I-V-TAC ye-LED yePlastiki yokuKhanya kweThubhu - ukufakwa

I-V-TAC ye-LED yePlastiki yokuKhanya kweThubhu - 1I-V-TAC ye-LED yePlastiki yokuKhanya kweThubhu - 2I-V-TAC ye-LED yePlastiki yokuKhanya kweThubhu - 3

V-TAC LED Plastic Tube Light - kwimeko

Kwimeko yawo nawuphi na umcimbi/umbuzo ngemveliso ungafikelela kuthi apha: [imeyile ikhuselwe]
Inombolo ye-WEEE: 80133970

Amaxwebhu / Izibonelelo

I-V-TAC ye-LED yePlastiki yokuKhanya kweThubhu [pdf] Incwadi yomyalelo
V-TAC, VT-061, VT-062, LED Plastic Tube Light

Ushiye uluvo

Idilesi yakho ye email aziyi kupapashwa.