Logo YASELWANDLE

SEALEY SM1300 Oscillating Belt Spindle Sander

SEALEY SM1300 Oscillating Belt Spindle Sander

Enkosi ngokuthenga imveliso yakwaSealey. Yenziwe kumgangatho ophezulu, le mveliso iya kuthi, ukuba isetyenziswe ngokwale miyalelo, kwaye igcinwe ngokufanelekileyo, ikunika iminyaka yokusebenza kwamahhala.

KUBALULEKILE: NCEDA UYIFUNDE LE MIYALELO NGOKUCHULEKILE. QAPHELA IIMFUNO EZIKHUSELEKILEYO ZOKUSEBENZA, IZILUMKISO & IZILUMKISO. YISEBENZISE IMVELISO NGOKUCHANEKILEYO KWAKUNYE NGONAKEKELELO NGENJONGO OYIJOLISWE KUYO. UKUNGAPHUMELELI UKWENZA OKU KUNOKUBANGA UMONAKALO KUNYE/OKANYE NOKWENZAKALA KOBUQU KWAYE KUYA KUSENZA ISIQINISEKISO. GCINA LE MYALELO IKHUSELEKILE UKUZE UYISEBENZISE IXESHA ELIZAYO.

IIMPAWU

SEALEY SM1300 Oscillating Belt Spindle Sander-1

UKHUSELEKO

UKHUSELEKO LOMbane

ISILUMKISO! Luxanduva lomsebenzisi ukujonga oku kulandelayo:
Qwalasela zonke izixhobo zombane kunye nezixhobo zombane ukuqinisekisa ukuba zikhuselekile phambi kokuba uzisebenzise. Hlola unikezelo lwamandla okukhokelela, iiplagi kunye
lonke uqhagamshelo lombane lokuguga nokonakala. U-Sealey uncoma ukuba i-RCD (iSixhobo esiSishiyekileyo sangoku) sisetyenziswe kuzo zonke iimveliso zombane. Unokufumana i-RCD ngokuqhagamshelana nomthengisi we-Sealey wasekuhlaleni.

ukuba imveliso isetyenziswa ngexesha lemisebenzi yoshishino, kufuneka igcinwe ikwimeko ekhuselekileyo kwaye ivavanywe rhoqo PAT (Portable Appliance Test).
Ulwazi lokhuseleko lombane, kubalulekile ukuba olu lwazi lulandelayo lufundwe kwaye luqondwe.
Qinisekisa ukuba ubushushu kuzo zonke iintambo nakwizixhobo zokusebenza zikhuselekile ngaphambi kokuba uzidibanise nombane.
Zihlole rhoqo iintambo zombane kunye neeplagi ukuba azigugile okanye zonakele kwaye ujonge zonke iintambo zoqhagamshelwano ukuqinisekisa ukuba zikhuselekile. Kubalulekile: Qinisekisa ukuba umqulutagUkulinganiswa kwezixhobo kuhambelana nombane oza kusetyenziswa kwaye iplagi ifakelwe ifyuzi echanekileyo - jonga ukulinganiswa kwefyuzi kule miyalelo.

  • SUKU tsala okanye uphathe isixhobo ngentambo yombane.
  • SUKU tsala iplagi kwisokethi ngentambo. Susa iplagi kwisokethi ngokugcina iplagi ibambelele ngokuqinileyo.
  • SUKU sebenzisa iintambo ezigugileyo okanye ezonakeleyo, iiplagi okanye izihlanganisi. Qinisekisa ukuba nayiphi na into enempazamo iyalungiswa okanye itshintshwe ngoko nangoko ngumsebenzi wombane oqeqeshiweyo.
    Le mveliso ifakelwe i-BS1363 / A 13 Amp 3 ipini plug.
    Ukuba intambo okanye iplagi yonakele ngexesha lokusetyenziswa, tshintsha unikezelo lombane kwaye ususe ekusebenziseni.
    Faka iplagi eyonakeleyo nge-BS1363 / A 13 Amp 3 ipini plug. Ukuba ungathandabuzeki nxibelelana nombane oqeqeshiweyo.
    Iimveliso zeClass II zifakwe kwi-live (brown) kunye nokungathathi hlangothi (blue) kuphela ziphawulwe nge SEALEY SM1300 Oscillating Belt Spindle Sander-11 Isimboli yeClass II;
    A) Qhagamshela i-BROWN ngocingo oluphilayo kwitheminali ephilayo 'L'.
    B) Qhagamshela ucingo oluluhlaza okwesibhakabhaka kwitheminali engathathi hlangothi 'N'.
    C) Emva kocingo, khangela ukuba akukho zicingo ezingenanto kwaye uqinisekise ukuba zonke iingcingo zixhunyiwe ngokuchanekileyo.SEALEY SM1300 Oscillating Belt Spindle Sander-2
    Qinisekisa ukuba ikhebula elingaphandle langaphandle linwenwela ngaphakathi kuthintelo lwentambo kwaye uthintelo luqinile.
  • SUKU qhagamshela nayiphi na ucingo kwitheminali yomhlaba.
    U-Sealey ucebisa ukuba ukulungiswa kuqhutywe ngumbane oqeqeshiweyo.
    UKHUSELEKO JIKELELE
  • Familiarise yourself with the application, limitations and potential hazards of the machine.
  • ISILUMKISO! Ensure all Health and Safety, local authority, and general workshop practice regulations are strictly adhered to.
  • ISILUMKISO! Disconnect from the electric power supply before changing accessories, servicing or performing any maintenance.
  • ISILUMKISO! SUKU sand any materials containing asbestos.
  • Maintain the machine and keep in good condition (use an authorised service agent).
  • Check the alignment of moving parts regularly. For safest performance keep the machine clean at all times.
  • Before each use check all abrasive attachments for condition. If worn or damaged replace immediately.
  • Replace or repair damaged parts. Use recommended parts only. Unauthorised parts are dangerous and will invalidate the warranty.
  • Locate the machine in a suitable area. Keep area clean, uncluttered and ensure there is adequate lighting.
  • Ensure the machine is situated on a solid work surface, adequate for supporting the weight of the machine and the workpiece.
  • Qinisekisa ukuba akukho zixhobo ezinokutsha okanye ezinokutsha kufutshane nendawo yokusebenza.
  •  Remove ill fitting clothing, ties and loose jewellery, and tie back long hair.
  • Maintain correct balance and footing, ensure the floor is not slippery and wear non-slip shoes.
  • Keep hands and body clear of the worktable when operating the machine.
  • Wear approved safety eye or face protection when operating the machine. If dust is generated respiratory protection must be worn.
  • SUKU operate the machine when you are tired or under the influence of alcohol, drugs or intoxicating medication.
  • SUKU leave the machine running unattended.
  • SUKU touch the abrasive whilst operating, or whilst sander is plugged into the electric supply.
  • SUKU switch the machine on while the workpiece is in contact with the abrasive.
  • SUKU operate the machine if any parts are damaged or missing as this may cause failure or possible personal injury.
  • SUKU allow children or untrained persons to operate the machine. Keep them away from the work area.
  • SUKU use the machine for any purpose other than wood finishing.
  • When not in use unplug from the mains electrical supply and store in a safe, dry, childproof location.
    ISILUMKISO SEPEYINTI YENKOLO!
  • Paint once contained lead as a traditional ingredient. Contact with the dust from the removal of such paint is toxic and must therefore be avoided. The following action must be taken before using the sander on a surface that you suspect may contain lead paint. User must determine potential hazard relating to age of paint to be removed (modern paints do not have lead content).
  • DANGER! Keep all persons and pets away from the work area.
  • We recommend personal protection by using the following safety items:
  • Paint Spray Respirator (Our ref SSP16EN)
  • PE Coated Hooded Coverall (Our ref SSP266).
  • Latex Gloves (Our ref SSP24).
  • Take adequate measures to contain the paint dust, flakes and scrapings.
  • Continue to wear safety equipment as in 1.3.3. above and thoroughly clean all areas when task is complete. Ensure paint waste is disposed of, in sealed bags or containers, according to local regulations.

INTSHAYELELO

Oscillating belt and spindle/bobbin sander with dust extraction port. The oscillation allows faster sanding and prevents burning of the workpiece. Features a tilting front table up to 48° for bevel sanding and has indents at popular angles 0°, 15°, 22.5°, 30° and 45°. All sanding parts and accessories have allocated slots in the housing for storage. Easily change between belt and spindle/bobbin sander with the supplied wrench. Supplied with 610 x 100mm belt and Ø13, 19, 25, 38 and 50mm bobbins.

Ukucaciswa

  • Model No: …………………………………………………………SM1300
  • Belt Size(s): ……………………………………………….610 x 100mm
  • Bobbins Included:………………………….Ø13, 19, 25, 38, 50mm
  • Dust Extraction Diameter: ………………….. ID/OD – Ø36/39mm
  • Motor Power: …………………………………………….. 450W – 230V
  • No-Load Speed: ………………………………………. 2000/1750rpm
  • Oscillations: ……………………………………………………….. 600pm
  • Spindle Height: ………………………………………………….. 102mm
  • Table Size: ………………………………………………..489 x 483mm
  • Table Tilt: …………………………………………………………….. 0-48°

SEALEY SM1300 Oscillating Belt Spindle Sander-3

OKUQUKETHWEYO

The following items are included with your tool:

  • Oscillating Edge Belt/Spindle Sander (1)
  • Throat Plates (5)
  • Umsele
  • Intonga
  • Iiwasha eziFlethi (3)
  • I-Spindle Nut
  • Sanding Sleeves (5)
  • Sanding Drums (4)
  • Sanding Belt Assembly
  • Itheyibhile Faka
  • Incwadi yemigaqo yokusebenza

SEALEY SM1300 Oscillating Belt Spindle Sander-4

UKUHLOLA

INSTALLING THE SANDING BELT ASSEMBLY
Slide the fan onto the motor shaft (fig.2) with the vanes facing down. Rotate the fan gently until it engages with the lugs on the drive shaft.
Slide the belt assembly down the drive shaft (fig.3). Align the drum drive splines with the slots in the fan.
Place the foot of the sanding belt assembly into the nylon wear plate.
Tighten the spindle knob.
Fit the sanding belt (see section 6.3).

REMOVING THE SANDING BELT ASSEMBLY
Loosen the work rest knob and pivot the work rest clear. Tighten the knob.
Remove the spindle knob and lift the spindle belt assembly off.
Store the belt assembly in the pocket at the rear of the base.

SEALEY SM1300 Oscillating Belt Spindle Sander-5

INSTALLING SANDING SLEEVES OVER 1/2” DIAMETER (fig.4)

SEALEY SM1300 Oscillating Belt Spindle Sander-6
Fit the fan as in 5.1.1.
Install the table insert by sliding it into position over the fan. Ensure that the table insert is flush with the table.
Insert appropriate throat plate (see section 5.5.)
Slide the appropriate rubber sanding drum onto the spindle.
Slide the required sanding sleeve onto the drum.
Note: If the drum or sleeve proves difficult to slide on, apply talcum powder. Install the correct spindle washer and tighten the spindle nut, taking care not to overtighten.

INSTALLING 1/2” DIAMETER SANDING SLEEVES (fig.5)
Fit the fan as in 5.1.1.
Install the table insert, ensuring that the table insert is flush with the table.
Fit the 13mm throat plate.
Slide the 1/2” sanding sleeve over the spindle. (The rubber drum is not used). Install the upper spindle washer and tighten the spindle nut, taking care not to overtighten.

SELECTING THROAT PLATES AND UPPER SPINDLE WASHERS

SEALEY SM1300 Oscillating Belt Spindle Sander-7

ISILUMKISO! Incorrect throat plate selection could lead to debris being wedged between the abrasive surface and the insert and possible risk of injury.
PHAWULA: Always use the smallest throat plate that will fit over required drum.

UKUSEBENZA

ISILUMKISO! Ensure that you have read, understand and apply the safety instructions in Section 1.

SWITCHING ON and OFF
Switch on by means of the ”On” (I) switch and allow to run up to speed before use.
Switch off by pressing the “Off” (O) switch. This stands proud of the switch casing for emergency use.
The saw is fitted with a no-voltage-release switch: if the electric supply fails whilst the machine is running, it will not restart until the
“On” switch is pressed.

UQINISEKISO
To true the front table: place a square (not provided) between the table and the belt (fig.7). If the angle is not 90°, loosen the table lock knobs (either side) and move the front table to the exact angle. Tighten the table lock knobs.
To adjust the front table angle: loosen the lock table knobs and move the table to the required angle (fig.8). Tighten the table lock knobs.

SEALEY SM1300 Oscillating Belt Spindle Sander-8

REMOVING/FITTING THE SANDING BELT
Slide the tension lever to the right to release belt tension (fig.9).
Remove the sanding belt.
Place the replacement sanding belt over the drums (fig.10). Ensure that the belt is centred on the drums. Slide the tensioning lever to the left to tension the belt.
Run the machine briefly to check that the belt is running true.
If the belt runs toward the table, turn the tracking knob 1/4 turn clockwise and vice versa (fig.11).
If the belt still runs out of true, repeat 6.3.6. until correct.

SEALEY SM1300 Oscillating Belt Spindle Sander-9

UKUKHIWA KOTHULI
A vacuum cleaner may be connected to the extraction port to reduce airborne dust (fig.12).

lesondlo

No lubrication is required as all bearings are lubricated for life. Cleaning: DO NOT use abrasive or solvent cleaners; clean with a damp soapy cloth only.
PHAWULA: Even if coupled to a vacuum extraction system, dust is likely to collect in the recess in the table. Periodic cleaning is necessary to maintain the performance of the machine

SEALEY SM1300 Oscillating Belt Spindle Sander-10

UKHUSELEKO LOKUSINGQONGILEYO
Hlaziya izinto ezingafunwayo endaweni yokuzilahla njengenkunkuma. Zonke izixhobo, izincedisi kunye nokupakishwa kufuneka zihlelwe, zisiwe kwiziko lokurisayikilisha kwaye zilahlwe ngendlela ehambelana nokusingqongileyo. Xa imveliso ingasasebenziseki ngokupheleleyo kwaye ifuna ukulahlwa, khuphisa naluphi na ulwelo (ukuba lukhona) kwizikhongozeli ezivunyiweyo kwaye ulahle imveliso kunye nolwelo ngokwemigaqo yendawo.

IMIMISELO WEEE
Yilahle le mveliso ekupheleni kobomi bayo bokusebenza ngokuthobela uMyalelo we-EU ngeziNkunkuma zombane nezixhobo zombane (WEEE). Xa imveliso ingasafuneki, kufuneka ilahlwe ngendlela ekhusela indalo. Nxibelelana negunya lendawo yokulahla ulwazi.

Phawula: Umgaqo-nkqubo wethu ukuqhubekeka ukuphucula iimveliso kwaye ngenxa yoko sinelungelo lokutshintsha idatha, iinkcukacha kunye nezinto ezithile ngaphandle kwesaziso sangaphambili.
kubalulekile: Akukho Tyala lamkelweyo ekusetyenzisweni ngokungachanekanga kwale mveliso.
warranty: Isiqinisekiso ziinyanga ezili-12 ukusuka kumhla wokuthenga, ubungqina obufunekayo kulo naliphi na ibango.

Iqela laseSealey, iNdlela yaseKempson, iPaki yeShishini yeSuffolk, iBury St Edmunds, iSuffolk. IP32 7AR
01284 757500 01284 703534 [imeyile ikhuselwe] www.lseile.co.uk

Amaxwebhu / Izibonelelo

SEALEY SM1300 Oscillating Belt Spindle Sander [pdf] Imiyalelo
SM1300, Oscillating Belt Spindle Sander, SM1300 Oscillating Belt Spindle Sander, Belt Spindle Sander, Spindle Sander, Sander

Ucaphulo

Ushiye uluvo

Idilesi yakho ye email aziyi kupapashwa. amasimi ezifunekayo ziphawulwa *