Uxwebhu

AK48 3-Way Gcwalisa 2-Way Operating Heavy-Duty Grease Gun

sealey3-WAY FILL 2-WAY OPERATING HEAVY-DUTY GREASE GUN MODEL NO: AK48

Enkosi ngokuthenga imveliso yakwaSealey. Yenziwe kumgangatho ophezulu, le mveliso iya kuthi, ukuba isetyenziswe ngokwale miyalelo, kwaye igcinwe ngokufanelekileyo, ikunika iminyaka yokusebenza kwamahhala.

OKUBALULEKILEYO: NCEDA UYIFUNDE LE MIYALELO NGOKUCHULEKILE. QAPHELA IIMFUNO EZIKHUSELEKILEYO ZOKUSEBENZA, IZILUMKISO & IZILUMKISO. YISEBENZISE IMVELISO NGOKUCHANEKILEYO KWAKUNYE NGONAKEKELELO NGENJONGO OYIJOLISWE KUYO. UKUNGAPHUMELELI UKWENZA OKU KUNOKUBANGA UMONAKALO KUNYE/OKANYE NOKWENZAKALA KOBUQU KWAYE KUYA KUSENZA ISIQINISEKISO. GCINA LE MYALELO IKHUSELEKILE UKUZE UYISEBENZISE IXESHA ELIZAYO.

icon yomyalelo Jonga incwadi yemiyalelo

uphawu lokukhusela iliso Gqoka ukukhuselwa kwamehlo

gloves protectionNxiba iiglavu zokuzikhusela

wear protection icon Nxiba impahla yokuzikhusela

1. UKHUSELEKO

☐ WARNING! Ensure Health & Safety, local authority and general workshop practice regulations are adhered to when using this equipment.

Familiarize yourself with the application and the limitations of the grease gun, as well as the potential hazards.

Gcina indawo yokusebenzela icocekile, ingaxutywanga kwaye uqinisekise ukuba kukho ukukhanya okwaneleyo.

Keep the grease gun clean for best and safest performance.

Jonga ulungelelwaniso lwamalungu ashukumayo rhoqo.

✘ DO NOT use the grease gun for any purpose other than that it was designed for.

✘ DO NOT operate the grease gun if any parts are damaged or missing, as this may cause failure and/or personal injury.

Xa ingasetyenziswa ivenkile kwindawo ekhuselekileyo, eyomileyo, engenakuthwala abantwana.

☐ WARNING! Always wear approved eye protection when operating the grease gun.

☐ WARNING! An empty grease cartridge or grease is under pressure from the spring in the barrel, use caution when removing it.

2. INTSHAYELELO

Highly durable die-cast aluminum alloy pump head. Features 3-way fill with cartridge, bulk or manual capability. Fitted with 2-way operating extendable handle; pistol type, ideal for use in confined spaces and lever type, providing high pressure and volume. Supplied with rigid delivery tube, push-on hydraulic 4-jaw coupling and 300mm flexible delivery tube. Rubber gripped grease tube and handle for easy grip. Features variable stroke for controlled grease volume; half stroke gives low-pressure/low-volume, full stroke provides high pressure/high-volume delivery.
Accepts standard 400g cartridges.

3. INGCACISO

Model No: AK48
Capacity: 400cm³
Delivery per Stroke: 0.71cm³
Delivery Pressure: 6000psi

4. UMSEBENZI

operation parts

4.1. GREASE GUN LOADING

  • Unscrew barrel anticlockwise.
  • Pull back plunger rod fully and lock out with the tab (except when Suction Loading).

4.1.1. Cartridge Loading

  • Remove plastic cap from end of grease gun cartridge, insert into barrel of grease gun.
  • Remove seal from grease gun cartridge and screw grease gun head back onto the barrel.
  • Depress the bleed valve (Fig.1). Release the plunger rod using its tab, force the rod out and in a few times to eject air trapped in the grease, from the bleed valve.
  • When grease comes out of the valve the air has been discharged.
  • Pump the grease gun handle until grease flows continuously. If it does not, depress the bleed valve again and use the plunger rod to expel the trapped air.
  • Connect grease gun extension pipe and coupler onto grease gun outlet using PTFE tape, DO NOT over tighten.

4.1.2. Suction Loading

  • Put open end of grease barrel into grease container to a depth of 50mm.
  • Slowly pull back the plunger rod to pull the grease into the barrel. Lock the rod with the tab.
  • Shake the grease gun to settle the grease into the barrel.
  • Screw grease gun head back onto the barrel, depress the bleed valve (Fig.1).
  • Release the plunger rod using its tab, force it out and in a few times to eject air trapped in the grease, from the bleed valve. When grease comes out of the bleed valve the air has been discharged.
  • Pump the grease gun handle until grease flows continuously. If it does not depress the bleed valve and use the plunger rod to expel the trapped air.
  • Connect grease gun extension pipe and coupler onto grease gun outlet using PTFE tape, DO NOT over tighten.

4.2. FILLER PUMP LOADING

  • Screw the grease gun head onto the barrel.
  • Check that the bulk filler valve on this grease gun is compatible with the bulk filler pump valve.
  • Wipe both the nipples clean of any dirt before filling.
  • Connect the bulk filler valve to the grease bulk filler pump, keeping weight on the grease gun to keep it connected.
  • Pumping becomes very hard once the grease gun barrel is filled.
  • Depress the bleed valve.
  • Release the plunger rod using its tab, force it out and in a few times to eject air trapped in the grease, from the bleed valve. When grease comes out of the bleed valve the air has been discharged.
  • Pump the grease gun handle until grease flows continuously. If it does not depress the bleed valve and use the plunger rod to expel the trapped air.
  • Connect grease gun extension pipe and coupler onto grease gun outlet using PTFE tape, DO NOT over tighten.

4.3. USING GREASE GUN

4.3.1. Select the required stroke by releasing the trigger on the handle (Fig.1).
4.3.2. The coupler has jaws which snap onto a grease nipple. Push the coupler straight onto the nipple to form a good fit.
4.3.3. Operate the grease gun as square onto the nipple as possible.
4.3.4. Once finished tilt the coupler twist and pull it off.
☐ WARNING! DO NOT try to pull the coupler off straight.

UKHUSELEKO LOKUSINGQONGILEYO

Hlaziya izinto ezingafunwayo endaweni yokuzilahla njengenkunkuma. Zonke izixhobo, izincedisi kunye nokupakishwa kufuneka zihlelwe, zisiwe kwiziko lokurisayikilisha kwaye zilahlwe ngendlela ehambelana nokusingqongileyo. Xa imveliso ingasasebenziseki ngokupheleleyo kwaye ifuna ukulahlwa, khuphisa naluphi na ulwelo (ukuba lukhona) kwizikhongozeli ezivunyiweyo kwaye ulahle imveliso kunye nolwelo ngokwemigaqo yendawo.

Phawula: Umgaqo-nkqubo wethu ukuqhubekeka ukuphucula iimveliso kwaye ngenxa yoko sinelungelo lokutshintsha idatha, iinkcukacha kunye nezinto ezithile ngaphandle kwesaziso sangaphambili.

kubalulekile: Akukho Tyala lamkelweyo ekusetyenzisweni ngokungachanekanga kwale mveliso.

warranty: Isiqinisekiso ziinyanga ezili-12 ukusuka kumhla wokuthenga, ubungqina obufunekayo kulo naliphi na ibango.

Iqela laseSealey, iNdlela yaseKempson, iPaki yeShishini yeSuffolk, iBury St Edmunds, iSuffolk. IP32 7AR

01284 757500

01284 703534

[imeyile ikhuselwe]

www.lseile.co.uk

© Jack Sealey Limited

Inguqulelo yolwimi loqobo

AK48 Issue:2 (H,F) 23/11/21

Amaxwebhu / Izibonelelo

SEALEY AK48 3-Ndlela Gcwalisa 2-Way Operating Heavy-Duty Grease Gun [pdf] Incwadi yomyalelo
AK48 3-Way Fill 2-Way Operating Heavy-Duty Grease Gun, AK48, 3-Way Fill 2-Way Operating Heavy-Duty Grease Gun

Ucaphulo

Ushiye uluvo

Idilesi yakho ye email aziyi kupapashwa.