I-OWLLON TNS-0117 Dobe Wireless Gamepad yeNintendo Switch Pro Controller Manual
OWLLON TNS-0117 Dobe Wireless Gamepad For Nintendo Switch Pro Controller

Imveliso Intshayelelo:

This controller is of Bluetooth wireless type, which is mainly used with N-S console. The aisle light of the controller is assigned through the console. This product is available in motor vibration and sensor functions, and it supports the connection to PC console via USB so as to achieve PC XINPUT function

Umzobo weMveliso:

Umzobo weMveliso
Umzobo weMveliso

Function Diagram:

Igama lomsebenzi Is there a function? Iingxelo
Uqhagamshelo lweengcingo ze-USB Ewe  
Unxibelelwano lweBluetooth inkxaso  
Imodi yoxhumo N-S PC mode  
Six-axis gravity induction Ewe  
Isitshixo Ewe  
B isitshixo Ewe  
X isitshixo Ewe  
Y isitshixo Ewe  
- isitshixo Ewe  
+ Isitshixo Ewe  
L key Ewe  
R iqhosha Ewe  
ZL key Ewe  
ZR key Ewe  
Isitshixo sasekhaya Ewe  
Print Screen key function Ewe  
I-3D joystick (umsebenzi we-3D wasekhohlo wovuyo) Ewe  
Iqhosha le-L3 (i-3D ekhohlo iqhosha lokucofa umsebenzi wesitshixo) Ewe  
R3 key (right 3D joystick press key function) Ewe  
Cross key function Ewe  
TUBRO speed regulation function Ewe  
Connecting indicators Ewe  
Motor vibration intensity adjustment Ewe  
Uphuculo lomlawuli inkxaso  

Mode and Pairing Instruction:

  • 1. N-S wired connection mode:
    1. Before use the wired connection, please confirm the N-S console system: “set up” -> “controller and inductor” -> “wired connection of Pro controller” in “on” state.
    2. The controller is connected to the N-S base via USB cable so as to be used as the wired controller, and the corresponding indicator light of the controller will flash slowly; when you plug out the USB cable, the controller turns into wireless mode and connect the console automatically!
  • 2. N-S wireless connection mode:
    1. Before use the wireless connection, please confirm that the N-S console system turns to: “controller” -> “ change grip/order” in pairing state.
    2. Long press the code key of the controller for 3 seconds to enter into Bluetooth search mode, and the LED indicator light will flash in marquee type.
      The corresponding channel indicator light will be on after successful connection.
  • 3. PC-360, PC mode:
    Firstly, please download the PC 360 to Windows computer. After the PC 360 is installed, the controller should be connected to the computer via USB cable, and the corresponding channel indicator light will be on after successful connection. The LED2 and LED3 will be on when the No.1 and No.10 keys are pressed simultaneously to switch to PC mode.
  • 4. Back connection and shutdown instruction:
    1. Short press the Bluetooth code key to shutdown the controller.
    2. Press Home to wake up the controller. The awakened controller will automatically back connect the console which has been paired previously; it will switch to auto sleep if the back connection is not successful within 8 seconds.

Charging Indication and Charging Characteristics:

During the charging of the controller: the charging LED indicator light will be on, and it will be off after the controller is fully charged.

Ukulala ngokuzenzekelayo:

  • Connect N-S mode: the N-S console screen is off or shut down, and the controller automatically disconnects and switch to sleep mode.
  • Bluetooth connection mode: the Bluetooth disconnects and switches to sleep mode after the Bluetooth code key is pressed shortly.
  • Without any keys pressed within 5 min, it will switch to auto sleep mode (including gravitational induction immobility). Remarks: there is no auto sleep currently

TURBO Function Settings:

  • Semi-automatic umsebenzi useto lwe-TURBO: cofa iqhosha le-TURBO kwaye emva koko ulisete njengeqhosha lomsebenzi we-TURBO njengoko kufuneka, emva koko unokugqiba useto ngempumelelo.
  • Full-automatic TURBO function setting: press TURBO key and then press the key which has been set up with the semi-automatic TURBO function.
  • Keys available for TURBO function settings: A key, B key, X key, Y key, + key, – key, L key, R key, ZL key, ZR key, “cross” key (up, down, left and right), L3 key (left 3D joystick press key) and R3 (right 3D joystick press key).
  • Cima izitshixo ze-TURBO ezisetyenzisiweyo:
    • Clear TURBO function of single key: press TURBO key + key set up with TURBO function for quick clear.
    • Shut down the automatic firing function: you should short press the – key and down arrow key once, and the controller will vibrate once to execute the command, then the automatic firing function of all keys will be turned off.
  • Regulation methods of automatic firing speed:
    • A. Increase automatic firing speed: short press T key and up arrow key once, and the controller will vibrate once to execute the command, which means that the automatic firing speed has been up regulated by one gear successfully.
    • B. Reduce automatic firing speed: short press T key and up arrow key once, and the controller will vibrate once to execute the command, which means that the automatic firing speed has been down regulated by one gear successfully.
    • C. The automatic firing function is memorable. If the console is connected after the controller is disconnected, the automatic firing speed set up previously can be memorized.

Motor Vibration Regulation:

3 gears in total: weak, intermediate and strong (the changed amplitude is 40%, 70% and 100%) regulation methods:

  • Lowest gear (40% amplitude): press 4 L/ZL/R/ZR keys on the side for 1 sec simultaneously, then the regulations is successful.
  • Intermediate gear (70% amplitude): press 4 L/ZL/R/ZR keys on the side for 1 sec simultaneously, then the regulations is successful.
  • Top gear (100% amplitude): press 4 L/ZL/R/ZR keys on the side for 1 sec simultaneously, then the regulations is successful.
  • The intermediate gear of controller vibration is acquiescently connected for the first time, i.e. 70% ampimfundo.

USB Connection Function:

  • The wired N-S and PC XINPUT mode connection is supported.
  • It is automatically identified as N-S mode when connected to N-S console.
  • It is in XINPUT mode when connected to PC.

Iparamitha zombane:

umcimbi Ixabiso lereferensi
Ukusebenza ivoltage DC 3.6-4.2V
Ukusebenza okwangoku 24mA
Ukulala ngoku 22.5uA
Ukungcangcazela okwangoku 82 mA~130 mA
Amandla okufaka DC 4.5~5.5V/400mA
Battery umthamo 500mAh
Umgama osebenzayo 10m

3D Joystick Instruction:

  • The 3D joystick is not required to be calibrated manually on N-S console. The 3D joystick will be calibrated automatically when the N-S console is plugged.
  • If the 3D joystick drips during use, please replug and unplug the controller before use. Be careful not to touch the 3D joystick when you plug and unplug the controller.

Gyroscope Calibration Instruction:

Enter into the “N-S console setting – controller and inductor – calibration of gyroscope inductor” for controller test and calibration; place the controller horizontally on the desktop and long press + or – for calibration.

Controller Upgrade Instruction:

  • If this product cannot be used due to system compatibility and other reasons, please contact the customer service provider to provide program: install the upgrade package to upgrade.
  • Specific operation: plug the controller into the computer first, then press the X+Y+HOME for 3 sec to enter into the upgrade mode; and then open the Program.exe software, click update firmware to upgrade, and wait for the prompt for successful update.

Imicimbi yokuNika ingqwalaselo:

  • This product should be well kept when not in use.
  • Le mveliso ayinakusetyenziswa kwaye igcinwe kwindawo efumileyo.
  • Le mveliso kufuneka isetyenziswe okanye igcinwe ngokuphepha uthuli kunye nemithwalo enzima ukuqinisekisa ubomi bayo benkonzo.
  • Nceda ungasebenzisi imveliso emanzisiweyo, ephazamisekile okanye eyaphukileyo kunye neengxaki zombane ezibangelwa ukusetyenziswa kakubi.
  • Musa ukusebenzisa izixhobo zokufudumeza zangaphandle ezifana nee-oveni zemicrowave ukomisa.
  • Ukuba yonakele, nceda uyithumele kwisebe lokulungisa ukuze ichithwe. Musa ukuyiqhawula wedwa.
  • Abasebenzisi babantwana baya kusebenzisa le mveliso ngokufanelekileyo phantsi kwesikhokelo sabazali, kwaye musa ukuba likhoboka lomdlalo.

Isilumkiso seFCC:

Esi sixhobo siyahambelana nenxalenye ye-15 yemithetho yeCCC. Umsebenzi uxhomekeke kule miqathango mibini ilandelayo:

  1. Le fowuni ayinakubanga uphazamiseko oluyingozi, kwaye
  2. esi sixhobo kufuneka samkele nakuphi na ukuphazamiseka okufumanekayo, kubandakanya nokuphazamiseka okunokubangela ukusebenza okungafunekiyo.

Naluphi na utshintsho okanye uhlengahlengiso olungavunyelwanga ngokucacileyo liqela elinoxanduva lokuthobela linokulonakalisa igunya lomsebenzisi lokusebenzisa izixhobo.

Phawula: Esi sixhobo sivavanywe kwafunyaniswa ukuba siyangqinelana nemida yesixhobo sedijithali esikuDidi B, ngokulandela icandelo le-15 leMigaqo yeCCC. Le mida yenzelwe ukubonelela ngokhuseleko olufanelekileyo ekuphazanyisweni bubungozi kufakelo lwendawo yokuhlala.
Esi sixhobo sisebenzisa ukusetyenziswa kwaye sinokukhupha amandla amaza erediyo kwaye, ukuba asifakwanga kwaye sisetyenziswe ngokwemiyalelo, sinokubangela ukuphazamiseka okuyingozi kunxibelelwano lwerediyo. Nangona kunjalo, akukho siqinisekiso sokuba ukuphazamiseka akuyi kubakho kufakelo oluthile. Ukuba esi sixhobo sibangela uphazamiseko olubi kwiradiyo okanye kulwamkelo lukamabonakude, olunokumiselwa ngokusicima isixhobo sivulwe, umsebenzisi uyakhuthazwa ukuba azame ukulungisa olo phazamiso ngenyathelo elinye okanye nangaphezulu:

  • Phinda uyenze kwakhona okanye uyibuyise kwakhona i-eriyali yokufumana.
  • Yandisa ukwahlula phakathi kwesixhobo kunye nesamkeli.
  • Qhagamshela izixhobo kwivenkile ephuma kwisekethe eyahlukileyo kuleyo idityaniswe kuyo umamkeli.
  • Nxibelelana nomthengisi okanye uchwepheshe onamava woncedo.

Isixhobo sivavanyiwe ukuhlangabezana nemfuno yokuvezwa ngokubanzi kweRF. Isixhobo sinokusetyenziswa kwimeko yokuvezwa okuphathekayo ngaphandle kwesithintelo.

Amaxwebhu / Izibonelelo

OWLLON TNS-0117 Dobe Wireless Gamepad For Nintendo Switch Pro Controller [pdf] Incwadi yomsebenzisi
TNS-0117, TNS0117, 2AJJCTNS-0117, 2AJJCTNS0117, TNS-0117 Dobe Wireless Gamepad For Nintendo Switch Pro Controller, TNS-0117, Dobe Wireless Gamepad For Nintendo Switch Pro Controller

Ushiye uluvo

Idilesi yakho ye email aziyi kupapashwa. amasimi ezifunekayo ziphawulwa *