Iimvavanyo ze-Extech CB10 kunye neeSekethe ze-GFCI

Intshayelelo

Sivuyisana ngokuthenga kwakho i-Extech Model CB10 Circuit Breaker Finder kunye ne-Receptacle Tester. Esi sixhobo sithunyelwa ngokuvavanywa ngokupheleleyo kwaye silinganiswe kwaye, ngokusetyenziswa ngokufanelekileyo, siya kunika iminyaka yenkonzo ethembekileyo.

Inkcazo yemitha

Umamkeli

1. Ibonisa i-LED kunye ne-Beeper
2. ON/OFF kunye noSensitivity uhlengahlengiso
3. Iplagi yokugcina isidluliseli
   Qaphela ukuba indawo yebhetri ibekwe ngasemva komamkeli.
   Isidluliseli
4. Iskimu sekhowudi ye-Receptacle ye-LED
5. GFCI iqhosha lovavanyo
6. Isixhobo se-LED

Ukhuseleko

• Olu phawu lusecaleni kolunye uphawu, i-terminal okanye isixhobo esisebenzayo lubonisa ukuba umsebenzisi kufuneka abhekisele kwingcaciso ekwiMiyalelo yokuSebenza ukunqanda ukwenzakala okanye umonakalo kwimitha.
• ISILUMKISO Olu phawu lwesilumkiso lubonisa imeko enokuba yingozi, enokuthi ukuba ingaphetshwa, ingabangela ukufa okanye ukwenzakala okukhulu.
• ISILUMKO Olu phawu lwe-CAUTION lubonisa imeko enokuba yingozi, enokuthi ukuba ingaphetshwa, ingabangela umonakalo kwimveliso.
• Olu phawu lubonisa ukuba isixhobo sikhuselwe ngokugquma kabini okanye ukugquma okongeziweyo.

Iinkcukacha

• Umsebenzi weVoltage: 90 ukuya ku-120V
• Izakhelo zokuSebenza: 47 ukuba 63Hz
• Ukunikezwa Amandla: 9V ibhetri (umamkeli)
• Ubushushu bokusebenza: 41°F ukuya ku-104°F (5°C ukuya ku-40°C)
• Ubushushu boGcino: -4°F ukuya ku-140°F (-20°C ukuya ku-60°C)
• Ukufuma okuSebenzayo: Ubukhulu be-80% ukuya kuma-87°F (31°C) buhla ngokulandelelana ukuya kuma-50% kwi-104°F (40°C)
• Ukufuma kokuGcina: <80%
• Umphakamo wokuSebenza: 7000ft, (2000 yeemitha) ubuninzi.
• Ubunzima: I-5.9 oz (167g)
• Imilinganiselo: 8.5″ x 2.2″ x 1.5″ (215 x 56 x 38mm)
• Izamkelo: UL CE
• Uluhlu lwe-UL: Uphawu lwe-UL alubonisi ukuba le mveliso ihlolwe ukuchaneka kokufundwa kwayo.

Ukusebenza

ISILUMKISO: Hlala uvavanya kwisekethe eyaziwayo elungileyo ngaphambi kokusetyenziswa.

ISILUMKISO: Thumela zonke iingxaki ezibonisiweyo kwingcali yombane.

Ukufumana i-Circuit Breaker okanye iFuse

I-transmitter ifaka umqondiso kwisekethe enokuthi ibonwe ngumamkeli. Umamkeli uya kunkqonkqoza xa uphawu lubhaqwe. Ukulungelelaniswa kobuthathaka kuvumela ukulandelela kunye nokukhomba i-breaker circuit okanye i-fuse ekhusela isiphaluka esikhethiweyo.

1. Qhagamshelana iTransmitter / iReceptacle Tester kwindawo yokukhupha amandla. Ii-LED ezimbini eziluhlaza kufuneka zikhanyise.
2. Jikelezisa uSensitivity uhlengahlengiso loMfumani ukusuka kwindawo OFF ukuya kwindawo ye-HI. I-LED ebomvu kufuneka ivule. Ukuba i-LED ayilayiti, buyisela ibhetri.
3. Vavanya ukusebenza kwe-Receiver ngokuyibeka kufutshane nesidluliseli. Umamkeli kufuneka beep kwaye i-LED kufuneka idanyaze.
4. Kwiphaneli ye-breaker, setha uvakalelo kwindawo ye-HI kwaye ubambe umamkeli njengoko kuboniswe yilebula ethi "UP - PHANTSI".
5. Hambisa umamkeli ecaleni komqolo we-breakers de isekethe ekhethiweyo ichongwe nge-beep kunye nokukhanya okudanyazayo.
6. Nciphisa uvakalelo njengoko kuyimfuneko ukukhomba i-breaker circuit echanekileyo elawula isiphaluka.

Receptacle Wiring Test

• I-WIRING ELUNGILEYO
• UVAVANYO lwe-GFCI LUYAQHUBEKA
• OKUSHISA OKUNGAPHAKATHI NGOKUVULEKILEYO OKUSHISAYO
• OKUSHISAYO NOMHLABA UBUYISIWE
• OKUSHISAYO KUNYE NEKUngathathi hlangothi
• VULA OKUSHISAYO
• VULA NGAPHANDLE
• UMHLABA OVULAYO
• CIMA

1. Qhoboshela iTransmitter / iReceptacle tester kwindawo yokuphuma.
2. Ii-LED ezintathu ziya kubonisa imeko yesiphaluka. Umzobo udwelisa zonke iimeko ezinokubonwa yi-CB10. Ii-LEDs kulo mzobo zimele i view ukusuka kwicala leqhosha le-GFCI le-transmitter. Nini viewkwelinye icala le-transmitter ii-LEDs ziya kuba ngumfanekiso wesipili wezo ziboniswe apha.
3. Umhloli akayi kubonisa umgangatho woxhulumaniso lomhlaba, iingcingo ezi-2 ezishushu kwisekethe, ukudibanisa kweziphene, okanye ukuguqulwa kwabaqhubi abasemhlabeni kunye nabangathathi hlangothi.

Uvavanyo lwe-GFCI yokwamkela

1. Phambi kokusebenzisa umvavanyi, cofa iqhosha LOKUVAVANYA kwindawo yokwamkela ye-GFCI; I-GFCI kufuneka ihambe. Ukuba ayikhubeki, musa ukusebenzisa isiphaluka uze utsalele umnxeba kumntu osebenza ngombane oqeqeshiweyo. Ukuba iyahamba, cofa iqhosha LOKUSETHA kwindawo yokwamkela.
2. Qhoboshela iTransmitter / iReceptacle tester kwindawo yokuphuma. Qinisekisa ukuba i-wiring ichanekile njengoko kuchaziwe ngasentla.
3. Cinezela kwaye ubambe iqhosha lokuvavanya kumvavanyi ubuncinane imizuzwana ye-8; izibane zesalathisi kumvavanyi ziya kuvala xa i-GFCI ihambe.
4. Ukuba isekethe ayikhubeki, mhlawumbi i-GFCI iyasebenziseka kodwa i-wiring ayichanekanga, okanye i-wiring ichanekile kwaye i-GFCI ayisebenzi.

Ukubuyisela ibhetri

1. Xa ibhetri yehla ngaphantsi komthamo osebenzayotage i-LED yomamkeli ayiyi kukhanya. Ibhetri kufuneka itshintshwe.
2. Susa isiciko sebhetri yomamkeli ngokususa isikrufu usebenzisa i-screwdriver yentloko ye-Philips. (I-Transmitter inikwe amandla.)
3. Faka ibhetri ye-9 yevolthi ngokujonga i-polarity echanekileyo. Phinda ufake isiciko sebhetri.
4. Lahla ibhetri endala ngokufanelekileyo.

Iwaranti

I-FLIR Systems, Inc. iqinisekisa esi sixhobo sophawu lwe-Extech Instruments ukuba singabinaziphene kwiindawo kunye nokusebenza konyaka omnye ukususela kumhla wokuthunyelwa kwempahla (iwaranti eqingqiweyo yeenyanga ezintandathu iyasebenza kuluvo kunye neentambo). Ukuba kufuneka kube yimfuneko ukubuyisela isixhobo kwinkonzo ngexesha okanye ngaphaya kwexesha lewaranti, qhagamshelana neSebe leNkonzo yabaThengi ukuze ugunyazise. Ndwendwela i webindawo www.extech.com ngolwazi loqhagamshelwano. Inombolo yesiGunyaziso sokuBuyisa (i-RA) kufuneka ikhutshwe ngaphambi kokuba nayiphi na imveliso ibuyiswe. Umthumeli unoxanduva lweendleko zokuthumela ngenqanawa, imithwalo, i-inshurensi, kunye nokupakishwa okufanelekileyo ukuthintela umonakalo ekuhambeni. Esi siqinisekiso asisebenzi kwiziphene ezivela kwizenzo zomsebenzisi ezifana nokusetyenziswa kakubi, iingcingo ezingafanelekanga, ukusebenza ngaphandle kwenkcazo, ukulungiswa okungafanelekanga okanye ukulungiswa, okanye ukulungiswa okungagunyaziswanga. I-FLIR Systems, Inc. ikhupha ngokukodwa iziqinisekiso ezichaziweyo okanye ukuthengiselana okanye ukulungela injongo ethile kwaye ayisayi kuba noxanduva lwawo nawuphi na umonakalo othe ngqo, ongathanga ngqo, ongalindelekanga, okanye obangelwayo. Ityala lilonke le-FLIR lilinganiselwe ukulungiswa okanye ukutshintshwa kwemveliso. Iwaranti ebekwe ngasentla ibandakanya kwaye akukho siqinisekiso, nokuba sibhaliwe okanye sithethwa ngomlomo, sichaziweyo okanye sichaziwe.

Imigca yenkxaso: US 877-439-8324; Amazwe ngamazwe: +1 603-324-7800

• Uxhaso lobuchwepheshe: Ukhetho lwesi-3;
  • I-imeyile: support@extech.com
• Ukulungisa kunye nokuBuyisa: Ukhetho lwesi-4;
  • I-imeyile: ukulungiswa@extech.com

Iimpawu zemveliso zinokutshintshwa ngaphandle kwesaziso.

Nceda undwendwele wethu webindawo yolwazi lwangoku. www.extech.com

FLIR Commercial Systems, Inc., 9 Townsend West, Nashua, NH 03063 USA

ISO 9001 eqinisekisiweyo

Ilungelo lokushicilela © 2013 FLIR Systems, Inc.

Onke amalungelo agciniwe kuquka ilungelo lokuvelisa kwakhona ngokupheleleyo okanye inxalenye yalo naluphi na uhlobo. www.extech.com

IMIBUZO EBUZWA QHO

IVIDIYO-UMVELISO PHEZULUVIEW

Khuphela IPP LINK:  Iimvavanyo ze-Extech CB10 kunye ne-GFCI Circuits User Guide

ISIQINISEKISO: Iimvavanyo ze-Extech CB10 kunye ne-GFCI Circuits User Guide-Isixhobo.Ngxelo

Iimbekiselo

• Incwadi yokusebenzisa