I-SEEK M600 iYunithi yokuskena ye-SDK yeProgrammer

Ulwazi lweMveliso

Igama lemveliso	I-M600 User Manual kunye ne-Programmer SDK
Uhlaziyo	1X
Inombolo yoxwebhu	XXXXXX-1X
Umhla	NgoNovemba 29, 2022
Umenzi	E-Seek Incorporated
Uphawu lokuthengisa	I-E-Seek kunye ne-logo ye-E-Seek ziimpawu zorhwebo ezibhalisiweyo ze-E-Seek Ibandakanyiwe.
Webindawo	www.e-seek.com
Idilesi	R & D Centre 9471 Ridgehaven Ct. #E San Diego, CA 92123
Umnxeba	858-495-1900
Ifeksi	858-495-1901

Imiyalelo yokusetyenziswa kwemveliso

1. Funda incwadi yomsebenzisi ngononophelo ukuze uziqhelanise nemveliso.
2. Qinisekisa ukuba isixhobo sithobela iNxalenye ye-15 yeMithetho yeFCC kunye neRSS(s) yoShishino lwaseKhanada.
3. Fakela isixhobo esinomgama ubuncinane oyi-20 cm phakathi kweradiyetha kunye nomzimba wakho ukuthobela imida yokuba sesichengeni ngemitha yeFCC.
4. Jonga kwitheyibhile yemixholo ukuze uhambe ngokulula ngencwadana.
5. Landela icandelo lenkcazo yesixhobo ngaphezuluview yoMfuziselo M600.
6. Review iinkcukacha zemveliso ukuqonda iinkcukacha zobugcisa.

Ilungelo lokushicilela © 2022 E-Seek Incorporated. Onke Amalungelo Agciniwe.
I-E-Seek igcine ilungelo lokwenza utshintsho kuyo nayiphi na imveliso ukuphucula ukuthembeka, ukusebenza okanye ukuyila.
I-E-Seek ungacingeli nayiphi na imfanelo yemveliso evela, okanye ngokunxulumene, nesicelo okanye ukusetyenziswa kwemveliso, isekethe okanye isicelo esichazwe apha.
Akukho layisenisi inikezelwayo, ngokucacileyo okanye ngentsingiselo, estoppel, okanye ngenye indlela phantsi kwalo naliphi na ilungelo elilodwa lomenzi wechiza okanye ilungelo elilodwa lomenzi wechiza, ukhuselo okanye olunxulumene nayo nayiphi na indibaniselwano, inkqubo, izixhobo, umatshini, indlela yemathiriyeli, okanye inkqubo apho iimveliso ze-E-Seek zinokusetyenziswa khona. Ilayisenisi echaziweyo ikhona kuphela kwisixhobo, iisekethe kunye nenkqubo engaphantsi equlathwe kwiimveliso ze-E-Seek.

I-E-Seek kunye ne-logo ye-E-Seek ziimpawu zorhwebo ezibhalisiweyo ze-E-Seek Incorporated. Amanye amagama eemveliso akhankanyiweyo kwesi siKhokelo sisenokuba ziimpawu zorhwebo okanye ziimpawu zorhwebo ezibhalisiweyo zeenkampani zabo kwaye ziyavunywa.
Qaphela ukuba ngeli xesha ii-PDF417, MRZ, kunye ne-QR code decoders zibhaliwe kodwa azikasebenzi.
Qaphela ukuba i-M600 RFID ujongano kwi-PC usebenzisa iklasi ye-CCID ye-USB eqhelekileyo kwaye ayigqunywanga kolu xwebhu.

I-E-SEEK Inc.
Webindawo: www.e-seek.com

Imveliso yePatent
Iziko le-R & D
9471 Ridge haven Ct. #E
San Diego, CA 92123
Umnxeba: 858-495-1900
Ifeksi: 858-495-1901

INkcazelo yoMphazamiseko yeKhomishini yoNxibelelwano lwe-Federal
Esi sixhobo sithobela iCandelo le-15 leMithetho yeFCC. Umsebenzi uxhomekeke kwezi meko zimbini zilandelayo:

1. Esi sixhobo asinakubanga uphazamiseko oluyingozi, kunye
2. Esi sixhobo kufuneka samkele naluphi na uphazamiseko olufunyenweyo, kuquka uphazamiseko olunokubangela usetyenziso olungafunekiyo.

Esi sixhobo sivavanyiwe kwaye safunyanwa sithobela imida yesixhobo sedijithali soDidi A, ngokungqinelana neCandelo le-15 leMithetho yeFCC. Le mida yenzelwe ukubonelela ngokhuseleko olufanelekileyo ekuphazamisekeni okuyingozi kwindawo yokuhlala. Esi sixhobo sivelisa, sisebenzise kwaye sinokusasaza amandla amaza erediyo kwaye, ukuba asifakanga kwaye sisetyenziswe ngokuhambelana nemiyalelo, sinokubangela uphazamiseko oluyingozi kunxibelelwano lwerediyo. Nangona kunjalo, akukho siqinisekiso sokuba ukuphazamiseka akuyi kwenzeka kufakelo oluthile. Ukuba esi sixhobo sibangela uphazamiseko oluyingozi kunomathotholo okanye ulwamkelo lukamabonakude, olunokumiselwa ngokucinywa nokulayita isixhobo, umsebenzisi uyakhuthazwa ukuba azame ukulungisa uphazamiseko ngenye yale milinganiselo ilandelayo:

• Jongisa kwakhona okanye uhambise i-eriyali efumanayo.
• Yandisa ukwahlukana phakathi kwesixhobo kunye nomamkeli.
• Qhagamshela izixhobo kwindawo yokuphuma kwisekethe eyahlukileyo kuleyo apho umamkeli aqhagamshelwe khona.
• Dibana nomthengisi okanye igcisa likanomathotholo/kumabonakude ukuze ufumane uncedo.

Isilumkiso seFCC: Naluphi na utshintsho okanye uhlengahlengiso olungavunywanga ngokucacileyo liqela elinoxanduva lokuthotyelwa lunokuphelisa igunya lomsebenzisi lokusebenzisa esi sixhobo. Esi sidlulisi akufuneki sibe kwindawo enye okanye sisebenze kunye nayo nayiphi na enye i-eriyali okanye isidluliseli.

INgxelo yoMbane kwimitha:
Esi sixhobo sithobela imida yokuvezwa kwemitha yeFCC emiselwe indawo engalawulwayo. Esi sixhobo kufuneka sifakwe kwaye sisebenze kumgama omncinci wama-20 cm phakathi kweradiyetha kunye nomzimba wakho.

Ishishini Canada
Esi sixhobo siqulathe abathumeli-mvume/abamkeli (aba)mkeli abathobela i-Innovation, iSayensi kunye noPhuhliso loQoqosho lwe-RSS(ii)layisenisi-ekhutshiweyo zaseKhanada. Umsebenzi uxhomekeke kwezi meko zimbini zilandelayo:

1. Esi sixhobo sisenokungabangeli ukuphazamiseka.
2. Esi sixhobo kufuneka samkele naluphi na uphazamiseko, kuquka uphazamiseko olunokubangela ukusebenza okungafunekiyo kwesixhobo.

INTSHAYELELO

Enkosi ngokukhetha esi sixhobo.
Esi Sikhokelo soMsebenzisi sibonelela ngeenkcazo zeenkqubo zokusebenza kunye nee-API zeprogram ye-E-seek Model M600. Funda ngononophelo iSikhokelo soMsebenzisi phambi kokusebenzisa esi sixhobo.
Izikrini zokwenyani ezivelayo zinokwahluka kancinane kwimifanekiso yekhusi esetyenziswe kwesi Sikhokelo soMsebenzisi. IYunithi yokuskena iModel M600 ibizwa ngokuba "sisisixhobo"

INgqungquthela yeManuwali

• Isilumkiso: Oku kulumkisa ngomonakalo onokwenzeka kwesi sixhobo.
• Kubalulekile: Oku kubonisa imiyalelo ekufuneka ilandelwe ukuqinisekisa ukusebenza okuchanekileyo nokusebenza kakuhle kwesi sixhobo.
• Phawula: Oku kubonisa into ebalulekileyo ngokubanzi.
• Isikhumbuzo: Oku kubonisa into ebalulekileyo.
• Iinkcukacha: Oku kubonisa into ebalulekileyo.

Imiqathango

• Ukusetyenziswa okungagunyaziswanga okanye ukuveliswa kwesiKhokelo soMsebenzisi, nokuba sisonke sisonke okanye ngokuyinxenye, akuvumelekanga ngokungqongqo.
• Ulwazi oluqulethwe kwesi Sikhokelo soMsebenzisi sinokutshintsha ngaphandle kwesaziso.

UMBONO WEMVELISO
Esi sixhobo yi-ID3, i-ID1, kunye nesifundi sokupasa sokukhwela.

INKCAZO YESIXHOBO

I-E-Seek Model M600 ID Reader yazisa umgangatho omtsha wokusebenza wokufunda ikhadi le-ID. Iyakwazi ukufunda i-ID3 kunye ne-ID1 amakhadi ngaphandle kwe-hood ukwenza lula ukufundwa koxwebhu. Iibhakhowudi zokupasa zokukhwela nazo zinokufundwa. Ukusetyenzwa kwemifanekiso ekwinqanaba eliphezulu kwenziwa ukubonelela ngemifanekiso ye-ID1 ekumgangatho ophezulu ngaphandle kwe-hood.
I-Model M600 SDK ikwabandakanya i-MRZ, QR, kunye ne-PDF417 decoders. Iqhagamshela kwiPC isebenzisa uqhagamshelo olukhawulezayo lwe-USB 2.0.

PHEZULUVIEW YOMZEKELO M600
Amanani, i-1 kunye ne-2 ibonisa iimodyuli eziphambili kunye namacandelo e-M600.

INGCACISO YEMVELISO

Izinto	Inkcazo
Ukuqikelela	Uluvo: 2D CMOS   Isisombululo: RGB/IR 600dpi, UV 300dpi   Ubunzulu bombala: RGB/UV: 24 bits / pixel, IR: 8 bits / pixel Imithombo yokukhanya: Ebonakalayo (Mhlophe), IR (870 nm), UV (365 nm) Ifomathi yemveliso yomfanekiso: BMP
Smart Card	Ngaphandle koqhagamshelwano: ISO 14443 A/B, NFC,
Isilumkiso	Iyavakala: Qha   Isalathisi esibonakalayo: Ii-LED zesimo se-2 RGB
Uqhagamshelwano	USB 2.0 Isantya esiphezulu.
Umbane	Igalelo lamandla: 5V igalelo voltage. Ukusetyenziswa kwamandla: TBD Iadaptha yamandla: AC110-240V, 50/60Hz 0.35A Max Imveliso: 5V 2Amps
Ngokwasemzimbeni	Imilinganiselo: Ubude: 195mm Ububanzi: 160mm Ubude: 109mm/ 102mm (kwiglasi) Ubunzima: 900grams (2lbs) Ifestile yokuthatha umfanekiso: 130 x 95 mm (5.12 x 3.74”) Iglasi ekwaziyo ukubonakalisa kunye nokukrweleka
Okusingqongileyo	Ubushushu: Ukusebenza: -10°C ukuya ku-50°C (14°F ukuya ku-122°F) Ugcino: -20°C ukuya ku-70°C (–4°F ukuya ku-158°F) Ukufuma: Isebenza: 5-95 % (ayi-condensing) Uthuli: IP5x

IINKCUKACHA ZOBUGCISA

• RGB 24 bit @ 600 dpi
• IR 8 bit @ 600 dpi
• UV 24 bit @ 300 dpi
• ID3, ID1, kunye nepasi lokukhwela
• Icacisa i-MRZ
• Icacisa i-QR
• Icacisa i-2D (PDF417) & 1D
• USB 2.0 Isantya esiphezulu
• Ukusebenza ngaphandle kwe-hood
• I-RFID
• Ilungelo elilodwa lomenzi wechiza

UKUKHIPHA ISIXHOBO

Iphakheji ye-M600 ibandakanya:

• Isixhobo se-M600
• Intambo ye-USB
• Ikhadi lokulinganisa (???)

Intambo ye-USB
I-M600 ibonelelwe ngentambo yojongano lwe-USB. Le ntambo ivumela i-M600 ukuba ijongane ne-USB 2.0 yesantya esiphezulu kwikhompyuter yakho.

IKHADI LOKULINGANA ELIMHLOPHE

Ikhadi lokulinganisa lisetyenziselwa ukulinganisa ibhalansi emhlophe. Ukulinganisa kunokufuneka emva kokuthunyelwa okanye ukusetyenziswa ixesha elide. Ukwenza ulungelelwaniso lwebhalansi emhlophe faka ikhadi ngecala lotolo kuqala.
Emva kokusetyenziswa ixesha elide okanye ukuba ikhadi liyakrweleka kufuneka lilahlwe.

NDIYAQALISA

1. Iskena se-M600 sisebenzisa abaqhubi beWinUSB kwaye akukho kufakelo lufunekayo kwiWindows8, Windows10, okanye Windows11.
   Qhagamshela intambo yaMandla uM600 kwaye unike amandla iskena.

I-M600 kufuneka ivele phantsi kwezixhobo zeBhasi ye-Universal Serial kuMphathi weSixhobo.

Ngeli xesha jonga i-M600 imo ye-LED ephezulu, kwaye uqinisekise ukuba ukukhanya okuluhlaza kuqinile ON.
Ukuba isibane ESIBOMVU siyadanyaza kubonisa ukuba iskena sifumene impazamo enkulu. Jonga uhlobo lwempazamo ngokuvula i-“M600dll.log” file.

UKUSEBENZA KWEDEMO ISICELO
Khuphela iM600 Demo Isicelo ukusuka http://e-seek.com/products/m-600/

UMDA

Isoftware yePC iqulathe i-exe yesicelo, indibano yeC# API, kunye neC/C++ DLL enxibelelana neM600 nge-USB. Olu xwebhu lubandakanya i-M600 C# sample isicelo kunye ne C# API enika umphuhlisi we-C # ujongano olulula kwi-M600 DLL. I-M600 iqulethe imodyuli yeRFID esebenzisa ujongano oluqhelekileyo lweMicrosoft CCID olungabandakanywanga kolu xwebhu. Ukusebenza

Xa ikhadi lifakwe i-firmware ye-M600 iya:

• Skena ngokuzenzekelayo uxwebhu ukuba luvuliwe
• Decode the MRZ ukuba ikhona
• Decode PDF417 ukuba ikhona
• Skena usebenzisa ii-LED eziMhlophe
• Skena usebenzisa ii-IR LEDs
• Skena usebenzisa ii-UV LEDs

II-LED EZIKHOYO
Itheyibhile yobume be-M600 ye-LED imi ngolu hlobo lulandelayo:

GUI

Umzobo we-9 ubonisa kunye noxwebhu lwe-ID3 kunye nemiboniso ye-10 kunye noxwebhu lwe-ID1. Imifanekiso ye-ID1 inqunyulwe.
I-GUI ineezintathu ezincinci zangaphambiliview imifanekiso ngasekhohlo kunye nomfanekiso omkhulu omkhulu.

IMIFANEKISO EMINCINCI NGAPHAMBIVIEW PANE

Kukho iipaneli ezintathu ezincinci ezibonisa ikhadi eliskeniweyo kusetyenziswa izibane ezahlukeneyo.

• Umfanekiso wokuqala uthathwe kusetyenziswa ukukhanya okumhlophe.
• Umfanekiso wesibini uthathwe kusetyenziswa ukukhanya kwe-IR.
• Umfanekiso wokugqibela uthathwe kusetyenziswa isibane seUV.

UBUYILO

Eyona njongo yesicelo sedemo ye-C # kukubonelela nge example yendlela yokubhala isicelo esidibana ne M600 usebenzisa i C# API.

Usetyenziso (M600.exe okanye usetyenziso lomsebenzisi), i-M600api.dll kunye ne-M600dll.dllnd kufuneka zibe kulawulo olufanayo. I-DLL iya kudala ilog file (M600dll.log) kuluhlu apho isebenza ngokungagqibekanga kodwa inokuyekiswa ukuba iyafunwa.
Njengoko kukhankanyiwe kububanzi i-M600 inemodyuli ye-RFID edibanisa kwi-PC njengeklasi ye-CCID ye-USB kwaye ayigqunywanga kolu xwebhu.

M600 DEMO APP
Iprojekthi ye-C # M600APP iqulethe usetyenziso oluPhambili kunye ne-GUI. Yenza "M600.exe" ephunyeziweyo.
Iimodyuli kule projekthi zezi:

• FormM600demo.cs
• FormUpdate.cs

FORMM600DEMO.CS
Le yeyona ndlela iphambili kwaye iqulathe ikhowudi edibana ne-M600 C # API. Ibiza Init () umsebenzi oqalisa i-M600DLL ukunxibelelana ne-M600 kunye nokudlulisa imifanekiso ngokuzenzekelayo. Isicelo somsebenzisi kufuneka sibhale ngaphezulu i-WndProc() kwaye ifowunele i-M600's WndProcMessage () umsebenzi ukuba ifuna ukufumana uqhagamshelo lwe-USB kunye nokuqhawula uqhagamshelo.

IFOMU.CS
Le modyuli iqulathe ii-subroutines ezihlaziya i-GUI.

C # API

I-C # API ibonelela ngojongano olulula kwi-M600. Umphuhlisi we-C # kufuneka akwazi ukusebenzisa olujongano ngokukhawuleza ujongano kunye ne-M600 ngaphandle kokufuna ujongano kunye nekhowudi ye-M600 DLL engalawulwa ngokuthe ngqo.
Isicelo kufuneka sibhalisele imisitho yokufowuna xa iqaliswa. I-DLL iya kuthi emva koko ibuyisele usetyenziso xa isiganeko sisenzeka. Isicelo kufuneka emva koko silungelelanise umnxeba ubuyele kumsonto wayo usebenzisa indlela ye-Invoke kwi-FormM600demo.cs.

Indibano ye-API imiselwe kwisicelo njenge:

I-public static CM600api m_M600 = entsha CM600api ();

IMISEBENZI API
i-void SetLogDir(LOG_DIR) [Ngokuzikhethela] Fowunela lo msebenzi phambi kwe-Init() ukubhala ngaphezulu ulawulo lwelog olungagqibekanga. Ngokungagqibekanga ukuba lo msebenzi awubizwa ngokuba yi-M600DLL iyakudala i-M600DLL.LOG file kulawulo olufanayo olusebenzayo. Gqiba lo msebenzi umtya woluhlu lwelog olufunwayo. Ukuyekisa ukugawulwa kwemithi dlula umtya othi "null".

• i-void Init()
  Fowunela lo msebenzi ekuqalisweni okunje ngexesha lokulayisha ifom.
• i-void RegCB(OnNewEvent)
  Bhalisa umnxeba womsitho kwakhona.
• ukungabikho Vala()
  Fowunela lo msebenzi phambi kokuba uvale isicelo njengexesha lokuvala ifomu.
• bool Ngena(bool bLogin)
  Xa kuyinyani iyunithi iya kuskena xa ikhadi lifakiwe (umsebenzi oqhelekileyo).
  Xa kungeyonyani iyunithi ayisayi kuskena xa ikhadi lifakiwe.
• i-Void UserBeep(E_BEEP eBeep)
  Yenza isandi sebhiphu. Ubalo lwe-E_BEEP lunamaxabiso amathathu:
  BEEP_1,
• i-GetVer engekho (ngaphandle kwe-M600_VER ver)
  Ifumana inombolo ye-serial ye-E-Seek (EsSerNum), inombolo ye-Silicon ye-serial (DsSerNum), i-DLL version, inguqulo ye-Barcode decoder, i-firmware version, kunye ne-hardware version njengoko kuchazwe yi-M600_VER isakhiwo.
  Amalungu e-M600_VER isakhiwo esinokuba nomdla kwi-deverloper ngala:
  ulong EsSerNum; // E-Funa inombolo yesiriyali
  //
  byte DllMajor; // Inombolo yenguqulo ye-DLL
  byte DllMinor;
  byte DllBuild;
  byte FwMajor; // Inombolo yenguqulo yeFirmware
  byte FwMinor;
  byte FwBuild; // Ngalo lonke ixesha zero
• bool WrUserData (byte[] aryData)
  Ubhala uluhlu lwebhayithi yedatha yomsebenzisi ukudanyaza (128 byte umda).
  I-Flash akufanele isetyenziswe ukugcina idatha etshintsha rhoqo njengoko ilinganiselwe kwi-10,000 ethembekileyo ebhalayo.
• bool RdUserData(byte[] aryData)
  Ufunda uluhlu lwebhayithi yedatha yomsebenzisi ukusuka kwi-flash (i-128 byte umda).
  Qaphela ukuba ukuze ufumane i-USB qhagamshela kwaye uqhawule uqhagamshelo lomsebenzisi kufuneka ubhale ngaphezulu i-WndProc() kwaye ufowunele i-M600 api's WndProcMessage.
• ikhuselwe isithuba esingekhoyo WndProc(ref Umyalezo m)
  {
  m_M600.WndProcMessage(ref m); // ijonga i-usb yokudibanisa kunye nokuqhawula
  isiseko.WndProc(ref m);

IZINTO API

Iklasi ye-C # API M600_IMG ine-bitmap nganye kwimithombo emithathu yokukhanya:
Imephu yeBitmap bmBmRgb;
Imephu yeBitmap bmBmIr;
Imephu yeBitmap bmBmUv;

Umfanekiso wokuqala yiRGB.
Umfanekiso wesibini ngu-IR.
Umfanekiso wesithathu yi-UV.
I-bitmaps iya kunqunyulwa ukuba uxwebhu lwe-ID1 luchongiwe.

Ulwakhiwo lwe-C # API M600_BC luqulathe ubume bedatha ye-2D.

byte[] aryMRZ; // Uluhlu lwe-Byte lwe-MRZ*
byte[] aryQR; // Uluhlu lwe-Byte lwe-QR*
byte[] aryP417; // uluhlu lwe-Byte lwePDF417*
int iBcOrient;
Ukuba i-PDF417 ibhakhowudi ifunyenwe i-iBcOrient element inamaxabiso amane abaliweyo oorinetation yekhadi kunye no-zero ongaziwayo.

• 0 = Ukuqhelaniswa okungaziwayo
• 1 = Ukuqhelaniswa okuqhelekileyo (Ingaphambili lekhadi lisekunene).
• 2 = Phambi ekunene kodwa ujonge phantsi.
• 3 = Umphambili ungasekhohlo.
• 4 = Umphambili ungasekhohlo kwaye ujonge ezantsi.

Phawula ukuba kolu kukhululwa i-MRZ, QR, kunye nePDF417 decoding ayikafakwa.

IMICIMBI:
Isicelo somsebenzisi kufuneka sigqithise umthunywa ekuqalisweni kwe-M600dll ukuze i-DLL ikwazi ukufowunela umthunywa ngexabiso elipheleleyo lomsitho.

I-M600 DLL ithumela isiganeko sokubuyela kwisicelo kwintambo i-M600 DLL idala.

• EVENT_DISCOVERY
• EVENT_SCANING IFirmware ihlola uxwebhu
• EVENT_IR umfanekiso weIR ulungile
• EVENT_RGB umfanekiso weRGB ulungile
• EVENT_UV umfanekiso we-UV ulungile
• EVENT_REMOVE Uxwebhu lunokususwa
• EVENT_BARCODE*
• EVENT_MRZ*
• EVENT_DONE kugqityiwe ukuskena
• EVENT_USB_CON i-USB iqhagamshelwe
• EVENT_USB_DIS i-USB icinyiwe

Hayi: Imisebenzi ye-MRZ kunye ne-bardode ayifakwanga okwangoku

IKHOWUDI YE-PSEUDO EXAMPLE

CM600api m_M600 = entsha CM600api (); // C # API into
m_M600.Init(M600_Callback); // ukufowunela iminyhadala
// Ukufowuna kwakhona kwesiganeko
//
I-public void M600_Callback(int iEvent)
{
tshintsha (iEvent)
{
ityala EVENT_IR: // IR umfanekiso ulungile
ikhefu;
ityala EVENT_RGB: // RGB umfanekiso ulungile
ikhefu;
ityala EVENT_UV: // umfanekiso we-UV ulungile
ikhefu;
ityala EVENT_DONE: // Ukuskena kugqityiwe
ikhefu;
…
}
}
…
m_M600.Vala()

UKULONDOLOZA

Kukho iinxalenye ezintathu zokugcina i-M600:
Ukucoca (Inyathelo 3-5)
Ulungelelwaniso (Inyathelo 6-7)

Inyathelo loku-1: Faka iKhadi lokuLungisa

IMIZOBO YOOMATSHINI

Amaxwebhu / Izibonelelo

I-SEEK M600 iYunithi yokuskena ye-SDK yeProgrammer [pdf] Incwadi yokusebenzisa 2A9IZ-M600, 2A9IZM600, m600, M600 iYunithi ye-SDK yokuskena iProgrammer, iYunithi ye-SDK yokuskena iNkqubo, iYunithi yesikena se-SDK, iYunithi yesikena

Iimbekiselo

• Incwadi yokusebenzisa