BULT AUDIO AirBass GearPods True Wireless Earbuds User Manual

PRO BASS GEAR PODS
INCWADI YOKUSEBENZISA

For a better sound quality experience, suggest using IOS 8.0/ Android 4.3 or above operating system.

Intshayelelo Product

Isishwankathelo seMisebenzi yeQhosha

Iindlebe zeSilicone	Pods Charging Pin
Isalathi seendlebe	Indawo yoLawulo lweTouch
Case Charging Pods for Pods	Charging Pods Indicator
Type- C Charging Connector

Ukuqhagamshela kwii-Earbuds
Ukuseta okokuqala:
Take the earbuds out from the case, the earbuds will automatically turn on.
Turn your device’s Bluetooth on. Search for “Boult Audio Gearpods” and select to connect. Ukusetyenziswa rhoqo :
Once next used, the earbuds will automatically connect with a preconnected device.

Qalisa ukumamela
Place the earbuds into your ear and twist slightly for a comfortable and snug
Phawula: Ucoca rhoqo umnatha wothuli emva kokusetyenziswa ukunqanda isandi sivalwe bubumdaka kunye nobutyobo.

Vula & Valiwe
Amandla-On

• Susa ii-earbuds kwi-case, ziya kuvula ngokuzenzekelayo kwaye zidibanise enye kwenye.
• Cinezela ixesha elide indawo yokulawula ukubamba kuzo zombini ii-earbud ngaxeshanye kwimizuzwana emi-2, emva koko ii-earbuds ziyakuvula kwaye zibhanqe enye kwenye.
  Ubume bokukhanya: One side red and blue LED light alternatively another side LED light quickly.

Amandla-Off

• Ii-earbuds ziya kuzicima ngokuzenzekelayo kwaye zifake imowudi yokutshaja xa zibekwe ecasini.
• Ukukhulula iBluetooth kwisixhobo kunye nokubeka ii-earbuds phantsi imizuzu emi-3 kuya kuzicima.
• Disconnecting the Bluetooth from the device, long press the touch control area for 5s and the earbuds will turn off.

Qalisa Ukutshaja

Ukutshaja ii-Earbuds
Place the earbuds into the case, once the charging pin connects, the light on the charging case will turn on to display the case the battery remains, then the fourth light keep white on indicate the earbuds charging, light off means the battery is full.

Ukutshaja ityala
Plug the charging case into a 5V/1A adapter with a Type-C cable (include in the package). The charging light will ging. When full the white light will stay on and the case should be disconnected from the power source.

Specification

Umgangatho weBluetooth: Inguqulo 5.1
IBluetooth ProHSP/HFP/A2DP/AVRCP
Imveliso VoltagIsiseko: 3.7V
Ixesha lokutshaja Ii-Earbuds- 1.5H, Ityala lokutshaja- 1H
Ukusebenza Umgama: 10M
Inkqubo ehambelanayo: Android/IOS/Windows

	Ukudlala komculo / ukunqumama	Single Click on L or R earbud
	Ingoma elandelayo	Double click the R earbud
	Ingoma edlulileyo	Double click the L earbud
	Thatha umnxeba	Single Click on L or R earbud
	End call/Reject call	Double-click on L or R earbud
	Umncedisi welizwi	Long press 3 Seconds L or R earbud

Kucacile ukubhanqa
Coca irekhodi yokumatanisa yee-earbuds kunye neeselfowuni:
Take out the earbuds from the charging case, and touch the left and right earbuds 5 times, it will clear the record of the Bluetooth device. Then search for the Bluetooth name “  Boult Audio Gearpods” to pair.

Phinda uqalise ukubhanqa ii-earbuds zasekhohlo nasekunene:
Put earbuds in the charging case and charge, then take earbuds out of the charging case when they charge for a few minutes. they will enter into pairing mode automatically.

Ukulungisa ingxaki

P: The earbuds don’t pair with each other?
A: Place the earbuds into the case for charging for a few seconds. take them out of the case and try to connect again.
P: The earbuds don’t charge when placed into the case.
A: Check to see if the charging case light will turn on when earbuds are placed inside. If it doesn’t light up charge the case
P: The sound is imbalanced between the left and right sides.
A: Nceda ucoce i-earbuds mesh emva kokusetyenziswa.

Amaxwebhu / Izibonelelo

BOULT AUDIO AirBass GearPods True Wireless Earbuds [pdf] Incwadi yomsebenzisi AirBass GearPods, True Wireless Earbuds, Wireless Earbuds, AirBass GearPods, Earbuds