Incwadi yoMsebenzisi yoThutho
Ukuhlaziywa ngoMatshi 22, 2021
Umthumeli yimodyuli yokudibanisa izixhobo zomntu wesithathu kwi-Ajax inkqubo yokhuseleko. Ihambisa i-alamu kwaye ilumkisa malunga nokusebenza kwe-t detector yangaphandleamper kwaye ixhotyiswe ngeyakho i-accelerometer, eyikhusela ekuphumeni. Isebenza kwiibhetri kwaye inokubonelela ngombane kwisixhobo esiqhagamshelweyo.
Umthumeli usebenza ngaphakathi kwenkqubo yokhuseleko ye-Ajax, ngokudibanisa ngeprotocol yeJeweler ekhuselweyo kwi-hub. Ayenzelwanga ukusebenzisa isixhobo kwiinkqubo zomntu wesithathu.
Ayihambelani ne-uartBridge okanye i-ocBridge Plus
Uluhlu lonxibelelwano lunokufikelela kwi-1,600 yeemitha ngaphandle kokuba akukho miqobo kwaye ityala lisusiwe.
I-Transmitter isetwa ngesicelo esiphathwayo se-iOS kunye nee-smartphones ezisekwe kwi-Android.
Thenga imodyuli yokudibanisa iTransmitter
Izinto eziSebenzayo
- Ikhowudi ye-QR eneqhosha lokubhalisa isixhobo.
- Abafowunelwa beebhetri.
- Isalathisi se-LED.
- ON / OFF iqhosha.
- Izikhululo zonikezelo lombane lomtshini, i-alam kunye ne-tampimiqondiso er.
Inkqubo yokusebenza
Umthumeli wenzelwe ukudibanisa abenzi boluvo bomntu wesithathu kunye nezixhobo kwinkqubo yokhuseleko yeAjax. Imodyuli yokudibanisa ifumana ulwazi malunga nee-alam kunye ne-tamper ukusebenza ngokusebenzisa iingcingo eziqhagamshelwe kwi-clamps.
I-Transmitter ingasetyenziselwa ukudibanisa i-panic kunye namaqhosha ezonyango, ii-detectors zentshukumo zangaphakathi nangaphandle, kunye nokuvula, ukungcangcazela, ukwaphuka, ukuphinda, igesi, ukuvuza kunye nezinye ii-detectors ezinocingo.
Uhlobo lwe-alam lubonakaliswe kwiisethingi ze-Transmitter. Umbhalo wezaziso malunga nee-alamu kunye neziganeko zesixhobo esiqhagamshelweyo, kunye neekhowudi zesiganeko ezithunyelwa kwiphaneli ephakathi yokubeka iliso yenkampani yokhuseleko (CMS) ixhomekeke kuhlobo olukhethiweyo.
Iindidi ezi-5 zizonke zezixhobo ezikhoyo:
| uhlobo | icon |
| Isivusi songenelelo |  |
| Ialam yomlilo |  |
| Ialam alarm |  |
| Iqhosha lokuphakuzela |  |
| I-alam yoxinzelelo lwegesi |  |
I-Transmitter ineeperi ezi-2 zeendawo ezinocingo: i-alamu kunye ne-tampi-er.
Izibini ezihlukeneyo zeetheminali ziqinisekisa ukunikezelwa kwamandla kwi-detector yangaphandle ukusuka kwiibhetri zemodyuli kunye ne-3.3 V.
Ukuqhagamshela kwihabhu
Phambi kokuqala uqhagamshelo:
- Ukulandela imiyalelo ye-hub, faka isicelo se-Ajax kwi-smartphone yakho. Yenza iakhawunti, yongeza ihabhu kwisicelo, kwaye wenze ubuncinci igumbi elinye.
- Yiya kwisicelo seAjax.
- Tshintshela kwi-hub kwaye ujonge uqhagamshelo lwe-intanethi (ngentambo ye-Ethernet kunye / okanye nenethiwekhi ye-GSM).
- Qinisekisa ukuba ihabhu ikhutshiwe kwaye ayiqali uhlaziyo ngokujonga imeko yayo kwisicelo esiselfowuni.
Abasebenzisi kuphela abanamalungelo okuphatha abanokongeza isixhobo kwihabhu
Indlela yokudibanisa iTransmitter kwi-hub:
- Khetha ukhetho lweDivayisi yesixhobo kwisicelo seAjax.
- Xela isixhobo, skena / bhala ngesandla iKhowudi yeQR (ekhoyo emzimbeni kunye nokupakishwa) kwaye ukhethe igumbi lendawo.
- Khetha Yongeza-ukubala ukubala kuya kuqala.
- Tshintshela kwisixhobo (ngokucofa iqhosha lokuvula/lokucima imizuzwana emi-3).
Ukuze ubhaqo kunye nokudibanisa kwenzeke, isixhobo kufuneka sibekwe ngaphakathi kwendawo yokhuselo lwenethiwekhi engenazingcingo ye hub (kwinto enye ekhuselweyo).
Isicelo soqhagamshelo kwihabhu sidluliselwa ixesha elifutshane ngexesha lokutshintsha isixhobo.
Ukuba uxhulumaniso kwi-hub ye-Ajax aluphumelelanga, i-Transmitter iya kucima emva kwemizuzwana emi-6. Ungaphinda uzame uqhagamshelo ngoko.
I-Transmitter eqhagamshelwe kwi-hub iya kuvela kuluhlu lwezixhobo ze-hub kwisicelo. Uhlaziyo lweemeko zesixhobo kuluhlu luxhomekeke kwixesha lombuzo wesixhobo elisetwe kwisethingi ye-hub, ngexabiso elihlala lihleli imizuzwana engama-36.
States
- izixhobo
- Umthumeli
| ye parameter | ixabiso |
| iqondo lobushushu | Ubushushu besixhobo. Ukulinganiswa kwiprosesa kunye notshintsho ngokuthe ngcembe |
| Amandla oMqondiso weJeweler | Amandla omqondiso phakathi kwehabhu kunye nesixhobo |
| Ukutshaja ibhetri | Inqanaba lebhetri lefowuni. Ibonakaliswe njenge-percentage Intlawulo yebhetri iboniswa njani kwiiapps zeAjax |
| Lid | I tampkwi-terminal state |
| Cothisa xa ungena, umzuzwana | Ukulibaziseka ixesha xa ungena |
| Ukulibaziseka xa ushiya, umzuzwana | Ixesha lokulibazisa xa uphuma |
| Uxhumano | Isimo soqhagamshelwano phakathi kwehabhu kunye neTransmitter |
| Soloko esebenzayo | f siyasebenza, isixhobo sihlala sikwimo exhobileyo |
| Isilumkiso ukuba sihanjisiwe | Ivula i-accelerometer yeTransmitter, ibona intshukumo yesixhobo |
| Ukucinywa okwethutyana | Ibonisa imeko yesixhobo sokuphelisa ukusebenza okwethutyana: • Hayi -Isixhobo sisebenza ngesiqhelo kwaye sidlulisa yonke imicimbi. • Isiciko kuphela — umlawuli we hub uye wacima isixhobo somzimba. • Ngokupheleleyo — isixhobo asibandakanywanga ngokupheleleyo kusetyenziso lwesixokelelwano ngumlawuli we hub. Isixhobo asiyilandeli imiyalelo yenkqubo kwaye asixeli ii-alam okanye ezinye iziganeko. • Ngokwenani leialamu — isixhobo senziwa ngokuzenzekelayo ukuba singasebenzi sisixokelelwano xa kugqithwe inani leealam (ngokukodwa kwisethingi yeZixhobo zokuZicima zisebenze). Inqaku lifakwe kwi-Ajax PRO app. • Ngexesha — isixhobo sivalwa ngokuzenzekelayo yinkqubo xa isibali-xesha sokubuyisela siphelelwe lixesha (izixhobo ezikhethekileyo zokuzicima). Uphawu lu ifakwe kwi-Ajax PRO app. |
| firmware | Uhlobo lwe-Detector e |
| I-ID yesixhobo | Ukuchongwa kwesixhobo |
izicwangciso
- izixhobo
- Umthumeli
- izicwangciso
| Icwangcisa | ixabiso |
| Ekuqaleni | Igama lesixhobo, linokuhlelwa |
| igumbi | Ukukhetha igumbi elibonakalayo apho isixhobo sabelwe khona |
| Ubume boQhagamshelwano lwesitshici sangaphandle | Ukukhethwa kwemeko yesiqhelo yesichongi sangaphandle: • Ngesiqhelo kuvalwe (NC) • Iqhele ukuvulwa (HAYI) |
| Uhlobo lwesitshici sangaphandle | Ukukhethwa kohlobo lwesikhangeli sangaphandle: • Ukubetha • Bistable |
| Tampubume bakho | Ukukhethwa kwesiqhelo tamper mod yesichongi sangaphandle: • Ngesiqhelo kuvalwe (NC) • Iqhele ukuvulwa (HAYI) |
| Uhlobo lweAlarm | Khetha uhlobo lwesivusi sesixhobo esiqhagamshelwe: • Ungenelelo • Umlilo • Uncedo lwezonyango • Iqhosha lokoyika • Irhasi Umbhalo we-SMS kunye ne-notivents feed, kunye nekhowudi ethunyelwe kwi-console yenkampani yokhuseleko, kuxhomekeke kuhlobo olukhethiweyo lwee-alamu. |
| Soloko esebenzayo | Xa imowudi isebenza, iTransmitter ithumela ii-alam naxa inkqubo ikhutshiwe |
| Cothisa xa ungena, umzuzwana | Ukukhetha ixesha lokulibaziseka xa ungena |
| Ukulibaziseka xa ushiya, umzuzwana | Ukukhetha ixesha lokulibaziseka ekuphumeni |
| Ukulibaziseka kwiNdlela yasebusuku | Ukulibaziseka kuvulwe xa usebenzisa imowudi yasebusuku |
| Isilumkiso ukuba sihanjisiwe | I-accelerometer ivula iTransmitter ukuze ibonelele nge-alam kwimeko yokunyakaza kwesixhobo |
| Ubonelelo lwaMandla oMtshina | Ukuvula umbane kwi-3.3 V kwisixhobo sangaphandle: • Ikhubaziwe ukuba wohluthiwe • Ihlala ikhubazekile • Ihlala ivuliwe |
| Ingalo kwiNdlela yasebusuku | Ukuba iyasebenza, ifowuni iya kutshintshela kwimowudi exhobileyo xa usebenzisa imo yasebusuku |
| Yazisa nge-siren ukuba i-alam ibhaqwe | Ukuba iyasebenza, iiSirens ezongeziweyo kwisistim ziyavulwa ukuba i-alam ibhaqwe |
| Uvavanyo lweMiqondiso yeJeweler | Itshintsha isixhobo kwimowudi yovavanyo lwamandla |
| Uvavanyo lokuLungiswa | Tshintshela isixhobo kwimowudi yovavanyo lwe-fade (ekhoyo kwii-detectors nge firmware version 3.50 kwaye kamva) |
| Isikhokelo somsebenzisi | Ivula iSikhokelo soMsebenzisi wesixhobo |
| Ukucinywa okwethutyana | Kukho iindlela ezimbini ezikhoyo: • Ngokupheleleyo — isixhobo asiyi kuphumeza imiyalelo yesixokelelwano okanye sisebenze ngokuzenzekela iimeko. Inkqubo iya kuzihoya ii-alam zesixhobo kwaye hayi • Isiciko kuphela — imiyalezo malunga nokuqalisa i-tampiqhosha lesixhobo alihoywa Funda okungakumbi ngesixhobo sokuyekisa ukusebenza okwethutyana Inkqubo inokuphinda isebenze ngokuzenzekelayo izixhobo xa inani elimiselweyo le-alamu lidlulile okanye xa ixesha lokubuyisela liphela. Funda ngakumbi malunga nokwenziwa ngokuzenzekelayo kwezixhobo |
| Isixhobo sokuLungisa | Ikhupha isixhobo kwihabhu kwaye icime useto lwayo |
Seta ezi parameters zilandelayo kwiisetingi zeTransmitter:
- Ubume boqhagamshelwano lomtshina wangaphandle, olunokuthi luvalwe ngokuqhelekileyo okanye luvuleleke ngokuqhelekileyo.
- Uhlobo (imowudi) ye-detector yangaphandle enokuthi ibe yi-bistable okanye i-pulse.
- I tamper indlela, enokuvalwa ngesiqhelo okanye iqhele ukuvuleka.
- I-alam ye-accelerometer-yavusa - ungalucima olu phawu okanye uluvule.
Khetha indlela yamandla yesixhobo sangaphandle:
- Iyacinywa xa i-hub ihluthwa - imodyuli iyeka ukunika amandla umtshina wangaphandle xa ukhupha izixhobo kwaye ayiqhubeki nemiqondiso evela kwi
Itheminali ye-ALARM. Xa uxhobisa umtshina, unikezelo lwamandla luphinda luqalise, kodwa imiqondiso ye-alam ayinanzwa - Ihlala ingasebenzi - i-Transmitter igcina amandla ngokucima amandla e-detector yangaphandle. Iimpawu ezivela kwi-terminal ye-ALARM zicutshungulwa zombini kwiimowudi ze-pulse kunye ne-bistable.
- Ihlala isebenza — le ndlela kufuneka isetyenziswe ukuba kukho naziphi na iingxaki kwi "Cinyiwe xa i-hub isusiwe". Xa inkqubo yokhuseleko ixhobile, iimpawu ezivela kwi-terminal ye-ALARM zisetyenzwa ngaphezu kweyodwa kwimizuzu emithathu kwimodi ye-pulse. Ukuba imowudi ye-bistable ikhethiwe, iimpawu ezinjalo ziqhubekekiswa ngoko nangoko.
Ukuba imo yokusebenza ethi "Ihlala isebenza" ikhethiwe kwimodyuli, i-detector yangaphandle inikwe amandla kuphela kwi-"Soloko isebenza" okanye "Ivalwe xa i-hub ikhupha izixhobo", nokuba sithini isimo senkqubo yokhuseleko.
Ukubonisa
| umcimbi | Ukubonisa |
| IModyuli iyavulwa kwaye ibhalisiwe | I-LED ilayita xa iqhosha le-ON licinezelwe. |
| Ubhaliso aluphumelelanga | I-LED iqhwanyaza imizuzwana ye-4 kunye nekhefu le-1 yesibini, emva koko iqhwanyaza ngamaxesha e-3 ngokukhawuleza (kwaye icima ngokuzenzekelayo). |
| IModyuli iyacinywa kuluhlu lwezixhobo ze hub | I-LED iqhwanyaza ngomzuzu we-1 kunye nekhefu le-1 yesibini, emva koko iqhwanyaza ngamaxesha e-3 ngokukhawuleza (kwaye icima ngokuzenzekelayo). |
| Imodyuli ifumene ialam/tampuphawu lwe | I-LED ikhanyisa i-1 yesibini. |
| Iibhetri ziyakhutshwa | Ulayita kancinane kwaye ucime xa isixhobo okanye i-tamper iyasebenza. |
Uvavanyo lwentsebenzo
Inkqubo yokhuseleko ye-Ajax ivumela ukuqhuba kovavanyo lokujonga ukusebenza kwezixhobo ezixhumeneyo.
Iimvavanyo aziqali kwangoko kodwa kwisithuba semizuzwana engama-36 xa usebenzisa useto oluqhelekileyo. Ukuqala kwexesha lokuvavanya kuxhomekeke kuseto lwexesha lokuskena komtshini (umhlathi on "Iinto zamatye anqabileyo" useto kwiisetingi ze hub).
Uvavanyo lweMiqondiso yeJeweler
Uvavanyo lokuLungiswa
Uqhagamshelo lweModyuli kwisixhobo sokujonga ucingo
Indawo ye-Transmitter imisela ukude kwayo kwi-hub kunye nobukho bayo nayiphi na imiqobo phakathi kwezixhobo ezithintela ukuhanjiswa kwesignali yerediyo: iindonga, izinto ezifakwe kwi-ge-size zibekwe ngaphakathi kwegumbi.
Jonga inqanaba lamandla omqondiso kwindawo yofakelo
Ukuba inqanaba lomqondiso licandelo elinye, asinakuqinisekisa ukusebenza okuzinzile kwenkqubo yokhuseleko. Thatha amanyathelo anokwenzeka ukuphucula umgangatho womqondiso! Ubuncinci, hambisa isixhobo - nokuba i-20 cm shift ingabonisa umgangatho wokwamkela.
Ukuba, emva kokushukuma, isixhobo sisenophawu lwamandla asezantsi okanye angazinzanga, sebenzisa i. Uluhlu lwesignali yerediyo yokwandisa iReX
I-Transmitter kufuneka ifakwe ngaphakathi kwingxowa yesixhobo esineentambo. Imodyuli ifuna isithuba esinalaa milinganiselo iphantsi ilandelayo: 110 × 41 × 24 mm. Ukuba ukufakelwa kwe-Transmitter ngaphakathi kwetyala le-detector akunakwenzeka, ngoko nayiphi na imeko ekhoyo ye-radiotransparent ingasetyenziswa.
- Qhagamshela iTransmitter kwi-detector ngokusebenzisa abafowunelwa beNC/NO (khetha ukusetwa okufanelekileyo kwisicelo) kunye neCOM.
Ubude obude bekhebula lokudibanisa inzwa yi-150 m (24 AWG i-twisted pair). Ixabiso lingahluka xa usebenzisa uhlobo olwahlukileyo lwentambo.
Umsebenzi weetheminali zeTransmitter
+ — — imveliso yombane (3.3 V)
IALARM - iitheminali ze-alarm
TAMP - tampiiterminals
KUBALULEKILE! Musa ukudibanisa amandla angaphandle kwimveliso yamandla yeTransmitter.
Oku kusenokonakalisa isixhobo
2. Khusela i-Transmitter kwimeko. Imivalo yeplastiki ifakwe kwikhithi yokufakela. Kuyacetyiswa ukuba ufake iTransmitter kubo.
Musa ukuyifaka iTransmitter:
- Kufuphi nezinto zentsimbi kunye nezibuko (ziyakwazi ukukhusela isignali yerediyo kwaye zikhokelela ekunciphiseni kwayo).
- Kufutshane kune-1 mitha ukuya kwindawo.
ULondolozo kunye noTshintsho lwebhetri
Isixhobo asifuni ukugcinwa xa sifakwe kwizindlu zenzwa yocingo.
Zisebenza ixesha elingakanani izixhobo zeAjax kwiibhetri, kwaye yintoni echaphazela oku
Ukutshintshwa kwebhetri
Iiteknoloji zeTeknoloji
| Ukuqhagamshela umtshini | I-ALARM kunye ne-TAMPER (NO/NC) iitheminali |
| Imowudi yokusetyenzwa kweempawu ze-alam ukusuka kwisixhobo | I-Pulse okanye iBistable |
| amandla | 3 × CR123A, 3V iibhetri |
| Ukukwazi ukunika amandla umkhangeli oqhagamshelweyo | Ewe, 3.3V |
| Ukukhuselwa ekuhlisweni | Accelerometer |
| Ibhendi eqhelekileyo | 868.0–868.6 MHz okanye 868.7 – 869.2 MHz, ixhomekeke kummandla wentengiso |
| ukuhambelana | Isebenza kuphela ngayo yonke i-Ajax, ii-hubs kunye nezandiso zoluhlu |
| Amandla amakhulu emveliso yeRF | Ukufikelela kwi-20 mW |
| Ukumodareyitha | IGFSK |
| Uluhlu lonxibelelwano | Ukufikelela kwi-1,600 m (nayiphi na imiqobo engekho) |
| Ithuba le-ping loqhagamshelwano kunye nomamkeli | 12-300 imizuzwana |
| lobushushu yokusebenza | Ukusuka -25 ° С ukuya +50 ° С |
| ukufuma yokusebenza | Ukuya kwi-75% |
| amacala | 100 × 39 × 22 mm |
| ubunzima | 74 g |
Gcwalisa iSeti
- Umthumeli
- Ibhetri CR123A - iipcs ezi-3
- Ikhithi yokufaka
- Isikhokelo sokuQala ngokukhawuleza
iwaranti
Iwaranti ye- "AJAX SYSTEMS MANUFACTURING" LIMITED LIABILITY COMPANY product isebenza iminyaka emi-2 emva kokuthenga kwaye ayisebenzi kwibhetri efakwe ngaphambili.
Ukuba isixhobo asisebenzi ngokuchanekileyo, kufuneka t inkonzo - kwisiqingatha samatyala, imiba yobugcisa inokusombulula ukude!
Umbhalo opheleleyo wewaranti
Isivumelwano somsebenzisi
Uxhaso lobuchwepheshe: [imeyile ikhuselwe]
Amaxwebhu / Izibonelelo
 |
I-AJAX 10306 I-Transmitter eneNcingo ukuya kwiSiguquli esingenazingcingo [pdf] Incwadi yomsebenzisi I-10306, i-Transmitter eneNcingo kwi-Wireless Detector Converter |
