WYMECT T1 Intelligent Detector User Manual
1 . Product Functions
- With automatic detection function, the host is portable, when in the environment with eavesdropping device, pinhole camera
- with a signal strength indicating light, can quickly find the source of the signal.
- the adjustment function button can adjustthe sensitivity.
Increase sensitivity to increase detection range or decrease sensitivity to shorten
2. Applicable people:
- People who often go to public entertainment places for consumptiom
- People who often go to various shopping malls to try on clothes;
- respect their own personal stability and stability of others;
- Persons who have access to and custody of trade secrets;
- Security personnel in places with trade secrets and technical secrets;
- anti-candid, anti-eavesdropping professionals;
3. Scope of application:
- Detect wtvther your office fistalled wreless eavesdropw, wireless eavesdropper.
- Detect whether the phone is eavesdropping or abnormal (it sends out signals for no reason when it is in standby mode).
- Detect whether your car is fitted with GPS tracking, GPS location tracker.
- Detect mobile phone message receiving and receiving signal, mobile phone Internet access signal. mobile phone switch and call signal.
- Detect the field strength ofwireless network signal. nubile phone base station signal and wireless monitoring system.
- Check hotel, washroom, guesthouse, entertainment place, changing room to prevent wireless camera.
- Business negotiations, school invigilation sites, factories, military installations or government offices.
4. product instruction
- Full frequency signal detection, frequency detection range (l MHz – 6.58Hz1. Long press (power on keyl for 3 to 5 seconds. when hearing the drip, release the finger, the indicator light is on, and the default full-frequency detection mode is turned on.
- Move the instrument up and down. left and right. A sound prompt indicates a source of emission. The more White signal indicator lights, the stronger the signal.
- Short press (sensitivity adjustment button), the more Whitelights, the higher sensitivity, can expand the search scope.
- Cycling adjustment (sensitivity adjustment button) can reduce the number Of White lights, reduce the sensitivity, reduce the detection range, can finally find the source of emission.
5. Detection Camera
- Long press power on key3t05 seconds, heard dripping, loosen the finger indicator. Short press/mode button machine at the back Of the six infrared night-vision light glows, short press (sensitivity adjustment key) can control a red light flashing speed, each time you press the button will flicker frequency fast a sensitivity level, a total Of 6 choice, can adapt to all kinds of people.
- Move the instrument up and down, left and right to carry out laser scanning Of the surrounding environment. Your eyes will look through the red filter of this instrument. If there is a camera lens in front of you, you will find a strong bright spot flashing.3. Click (Mode button) to turn Off the laser scanning function. Enter full frequency signal detection.
5. Charging
Indicator insert the data line in the box into the instrument and connect it to the charger. When charging, the red light will be long and the yellow light will be long when fully charged.
6. Basic parameters
7. Common Questions
1) Why is the silent sleep locator not detected?
A: Usually sleep locators work once a day, for 5 to 7 minutes at a time, so when the detector is normally detecting wireless signals, the locator may not send out a signal.
2) Why is the location of the real-time locator not accurately detected?
A: Real-time locator generally sends a signal about 10 seconds, detection test please do not move back and forth, it is best to fix in a position for more than 5 minutes, and then change a position to continue detection.
3) Why is the detector terminal beeping?
A; Please clear the surrounding environment because there are too many interference signals. Turn the sensitivity down the second time.
4) Why does the detector squeak so loudly near the Windows of the house?
A; The Windows are made of aluminum alloy, forming a loop antenna that receives signals particularly well.
5) Why was there no camera detected?
A; It is possible that the camera is not working or the camera is wired. At this time, use red filter infrared light detection.
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Read More About This Manual & Download PDF:
Documents / Resources
 | WYMECT T1 Intelligent Detector [pdf] User Manual 2BHQM-T1, 2BHQMT1, T1 Intelligent Detector, T1, Intelligent Detector, Detector |
