2009-2012 Dodge Ram1500 LED Dodge Ram
“
Product Information
Specifications:
- Part Number: DL5169H
- Application: 2009-2012 Dodge Ram 1500
Product Usage Instructions:
- Inspect the product and verify all components listed in the
manual. - Open the hood, remove the plastic shroud at the top, and set
fasteners aside. - Optional: Follow factory instructions to remove the entire
front grille shell. - Position the Grille onto the grille shell cavity.
- Mark locations for drilling on the shell through the holes of L
Brackets. Then drill holes on those locations. - Attach the Grille to the shell by inserting screws through the
tabs of L Brackets and holes on the shell; secure them with Flange
Nuts provided. - Reinstall the plastic shroud with the fasteners removed in Step
2. - Installation completed!
Note: You may need to adjust the billet grille
bars or tabs to fit properly. It is recommended to seek
professional installation for the best results. Use masking tape to
protect your vehicle during installation. The manufacturer is not
responsible for any installation-related damages.
FAQ
Q: Can I install the grille myself?
A: While self-installation is possible, professional
installation is recommended for optimal results.
Q: Do I need any special tools for installation?
A: Basic tools such as a drill may be required for
installation.
Q: How do I protect my vehicle during installation?
A: Use masking tape to cover the OEM grille shell edges to
prevent damage during installation.
Q: What if I encounter issues during installation?
A: If you face any difficulties during installation, it is
advised to seek assistance from a professional installer.
“`
Grille Installation Instruction
Part# DL5169H Application For 2009-2012 Dodge Ram 1500
Item Part Name QTY Description Item
Part Name
1 Mesh Grille Parts List 2 90°L Brackets
1 Stainless steel 6 1/4-20 ×3/4
4 70°L BracketsB 5 Phillips Screws
3 70°L BracketsA 8
6 Flat Nuts
Install Notes: Overlay
Replacement ×
Drill
Cut ×
Step
Description
illustration
Rev. 141001
QTY Description
2 16 10-24 x 1/2″ 32 10-24
1
Inspect product and check components with items listed above.
2 Pop Hood, remove plastic shroud at the top and set fasteners aside.
3
Optional:Using factory instructions, remove the entire front grille shell (as pictured in all Figures).
4
Attach the six 90°L Bracketsto the screws on the bottom of the grille, secure them with flange nuts.
5
Attach the eight 70°L Brackets A to the screws on the top of the grille, secure them with flange nuts.
6 Attach the two 70°L Brackets B to other screws of the grille, secure them with flange nuts
7 Position the Grille onto grille shell cavity .
8 Mark locations for drilling on the shell through the holes of L Brackets. Then drill holes on those locations.
9
Attach the Grille to the shell by inserting the screws through the tabs of L Brackets and holes on the shell;secure them with Flange Nuts provided (Figure 3).
7 Reinstall the plastic shroud with the fasteners removed in Step 2.
8 Installation completed!!!
The instruction here is for your reference only. You may need to bend the billet grille bars or tabs a little bit to adjust to fit. We strongly recommend the professional installer for best result. Please use masking tape and tape the OEM grille shell along the edge to protect your vehicle during installation. We are not responsible for any damage caused by the installation. Thank you for choosing our product!
Documents / Resources
 |
APS 2009-2012 Dodge Ram1500 LED Dodge Ram [pdf] Instructions 2009, 2010, 2011, 2012, 2009-2012 Dodge Ram1500 LED Dodge Ram, 2009-2012, Dodge Ram1500 LED Dodge Ram, LED Dodge Ram, Dodge Ram |