WHITESTONE LogoGalaxy Z Fold 3 5G Smartphone
User Guide

ZIPPER ZI ASA550E Vacuum Extractor - icon1 Please make sure to check the manual and installation video before using the product.
IMPORTANT ICON Products damaged or damaged by user usage, cannot be exchanged or refunded.

WHITESTONE Galaxy Z Fold 3 5G Smartphone - Qr Codehttp://m.site.naver.com/0lpjS
After checking the Quick guide, check the User guide.

Please check the model and components before using the product.

  • Match your device model with the product in advance.
  • Please check all the components listed on page3 and if there is any problem with the components, please contact us before the installation.

Cautions before Dome silk installation

  • Watch the Installation video and manual carefully before starting to install.
  • Please see all introductions, since each device has a different installation way.
  • Install the film after removing any film on the screen.
  • Please avoid a dusty place.
  • Be careful of any impacts while getting out the jig from the box in order to prevent any damage.
  • Be careful not to force the jig apart or break it.
  • If there is a problem with the subsidiary materials, please do not attempt installation and contact customer service immediately.

Components

IMPORTANT ICON Reference

  • There may be differences in components depending on the model.
  • To improve the product, the component’s appearance or specifications, etc. can be changed without prior notice.WHITESTONE Galaxy Z Fold 3 5G Smartphone - Fig 1

Read ICON Installation

STEP1
Remove the protection film attached to your device using the Remover.WHITESTONE Galaxy Z Fold 3 5G Smartphone - Fig 2STEP2
Attach the anti-slip pad vertically to the back of the jig.
Connect the Align block to the top part of the JIG.STEP3
Insert the device into the JIG incorrect direction.WHITESTONE Galaxy Z Fold 3 5G Smartphone - Fig 4STEP4
Clean the display with an alcohol wipe and cleaning cloth.
Then, remove any dust with a dust removal sticker.WHITESTONE Galaxy Z Fold 3 5G Smartphone - Fig 5STEP5
Hold the top part of the film as shown, and bend the [1 sticker] as shown in [Figure 1].
Like [Figure 2] Make sure that the protective film and pet film are properly separated and slowly remove the protective film. If it is as shown in [Figure 3], attach the protective film as if it is in the first state and remove it carefully so that only the protective film can be removed.
ZIPPER ZI ASA550E Vacuum Extractor - icon1 Please do not touch the adhesion surface.WHITESTONE Galaxy Z Fold 3 5G Smartphone - Fig 6STEP6
Flip the film with the protective film removed so that the top/bottom text is visible to the front.
1) Insert the top part of the film into the Align block.
2) Insert the bottom part of the film into the bottom part of the JIG.

  • Please do not touch the adhesion surface
  • Make sure the Film does not stick to the device

WHITESTONE Galaxy Z Fold 3 5G Smartphone - Fig 7

Dome Premium Genuine Film Installation User Guide

STEP7
Hold the top end of the film and slowly and forcefully push up with the squeegee from the bottom of the jig to the top while maintaining the squeegee at a lean angle. Push the squeegee all the way to the end.

  • ZIPPER ZI ASA550E Vacuum Extractor - icon1  A bubble might appear if you push the squeegee too fast.

WHITESTONE Galaxy Z Fold 3 5G Smartphone - Fig 8

Dome Premium Genuine Film Installation User Guide
Installation
STEP8
Remove the guide film from Jig’s hole while pressing the ①-top/②-bottom of the film with a squeegee. ③Push the film entirely to the short side of the squeeze.

WHITESTONE Galaxy Z Fold 3 5G Smartphone - Fig 9

Dome Premium Genuine Film Installation User Guide
Installation
STEP9
Bend the guide film attached to the film and remove it from the top. Finish by pressing the film edge with the short part of the squeegee. Remove the device from the JIG.

  • ZIPPER ZI ASA550E Vacuum Extractor - icon1 Microbubbles will disappear within a week.

WHITESTONE Galaxy Z Fold 3 5G Smartphone - Fig 10

Dome Premium Genuine Film Installation User Guide
ZIPPER ZI ASA550E Vacuum Extractor - icon1 Please check the Installation Guide.

Precautions after installation

  • Bubbles or lifting may occur by physical impacts such as drop impact, incompatible phone cases use, excessive strength while cleaning with alcohol wipes or etc.
  • No refund or exchange for any type of user damage.

※Global A/S※
CONTACT US
[email protected]
HOMEPAGE
www.whitestonedome.com
> WARRANTY REQUEST
We always provide friendly and fast service to your questions.
WHITESTONE Ltd.
27, Baekseokgongdan7-ro, SeoBuk-gu, Cheonan-si,
Chungcheongnam-do, Republic of KoreaWHITESTONE Logo

The unique Component Manufacturer, Whitestone (www.whitestonedome.com) for Mobile Device.
Copyright ⓒ 2021 Whitestone Ltd. All rights reserved.

Documents / Resources

WHITESTONE Galaxy Z Fold 3 5G Smartphone [pdf] User Guide
Galaxy Z Fold 3 5G Smartphone, Galaxy Z Fold 3, 5G Smartphone

References

Leave a comment

Your email address will not be published. Required fields are marked *