Document

Dome glass logo

WHITESTONE DOME GLASS Premium Film

WHITESTONE DOME GLASS Premium Film product

Please make sure to check manual and installation video before using the product.
Products damaged or damaged by user usage, cannot be exchanged or refunded.

Products damaged or damaged by user usage

After checking the Quick guide, check the User guide.
<Quick guide / User guide>

Please check the model and components before using the product.

  • Match your device model with the product in advance.
  • Please check all the components listed on the page3 and if there is any problem with the components, please contact us before the installation.
Cautions before Dome glass installation
  • Surface scratch restoration is limited to minor scratches.
  • It can be immediately restored, when writing with a stylus pen gently.
  • If pressing too hard, the glass could be restored in a few days, but may remain small stains.
  • No exchanges or refunds for customer’s fault.

Components

Reference

  • There may be differences in components depending on the model.
  • To improve the product, component’s appearance or specifications etc. can be change without prior notice.
  • Some components can be purchased separately if necessary.

Components

Installation-Display

STEP 1

Use the alcohol wipe and the cleaning cloth to wipe down the screen. Remove any dust on your screen with the dust remover sticker.

Installation-Display 01

STEP 2

Remove protective film number 1.
Align the film starting with the top edges of the screen.

Installation-Display 02

STEP 3

Remove the No.2 protective film and apply it with a squeeze.
Remove the No.3 protective film and apply it with a squeeze.

Installation-Display 03

STEP4

Remove any bubbles with a squeeze.
Finish by removing the protective film on the top side.

Installation-Display 04

Installation-Body

STEP1

Use the alcohol wipe and the cleaning cloth to wipe down the device. Remove any dust on your device with the dust remover sticker.

Installation-Body 01

STEP2

Remove protective film number 1.
Align the film starting with the top edges of the screen.

Installation-Body 02

STEP3

Remove the No.2 protective film and apply it with a squeeze. Remove the No.3 protective film and apply it with a squeeze.

Installation-Body 03

STEP4

Remove any bubbles with a squeeze.
Finish by removing the protective film on the top side.

Installation-Body 04

Installation-Body

STEP1

Use the alcohol wipe and the cleaning cloth to wipe down the device. Remove any dust on your device with the dust remover sticker.

Installation-Body 05

STEP2

Remove protective film number 1.
Align the film starting with the top edges of the screen.

Installation-Body 06

STEP3

Remove the No.2 protective film and apply it with a squeeze. Remove the No.3 protective film and apply it with a squeeze.Installation-Body 07

STEP4

Remove any bubbles with a squeeze.
Finish by removing the protective film on the top side.

Installation-Body 08

Please check the installation Guide.

Precautions after installation

  • Bubbles or lifting may occur by physical impacts such as drop impact, incompatible phone cases use, excessive strength while cleaning with alcohol wipes or etc.
  • No refund or exchange for any type of user damages.

CONTACT US

[email protected]

HOMEPAGE
www.whitestonedome.com
> WARRANTY REQUEST

We always provide friendly and fast service to your questions.

WHITESTONE Ltd.
27, Baekseokgongdan7-ro, SeoBuk-gu, Cheonan-si, Chungcheongnam-do, Republic of Korea

Documents / Resources

WHITESTONE DOME GLASS Premium Film [pdf] User Guide
DOME GLASS, Premium Film, DOME GLASS Premium Film

References

Leave a comment

Your email address will not be published.