WEN 10764 Electronic Digital Caliper
KNOW YOUR CALIPER
PRODUCT KEYS
- Step Measuring Face
- Internal Jaws
- LCD Display
- Slider Locking Knob
- Battery Tray (Back)
- Scale
- Depth Measuring Tip
- External Jaws
- ON / OFF Button
- Unit Selection Button
- Zero Button
- Slider Adjustment Knob
TO INSTALL THE BATTERY
- Remove the battery tray from the back of the unit (you may need a small flat-head screwdriver).
- Set the included battery in the tray, with the positive (+) side facing upward.
- Reinstall the battery tray.
SPECIFICATIONS
| Model Number | 10764 |
| Measuring Range | 0 – 150 mm / 0 – 6 Inches |
| Resolution | 0.01 mm / 0.0005 in. / 1/128 in. |
| Power | 1 x CR2032 3V Battery |
| Maximum Humidity | Up to 80% Non-Condensing |
| Operating Temperature | 0 – 40°C (32 – 104°F) |
| Storage Temperature | -10 – 60°C (14 – 140°F) |
| IP Rating | 67 |
OPERATION
4 WAY MEASUREMENT
NOTE: When taking measurements, do not touch the measuring faces of the caliper. The small amount of oil on your hands can affect the accuracy of your readings.
- INNER DISTANCE MEASUREMENT
- OUTER DISTANCE MEASUREMENT
- STEP DISTANCE MEASUREMENT
- DEPTH MEASUREMENT
CLEANING
- After each use, wipe clean the caliper with a soft cloth.
- DO NOT use any type of solvent.
- DO NOT immerse the caliper in liquid.
- Water damage may cause the display to fail.
- Wipe off the liquid and make sure the area between the slider and the beam has completely dried out.
- Reset the caliper by removing the battery for 30 seconds.
- Reinstall the battery and then turn the tool ON.
If the tool fails to work, please contact our customer service at 1-847-429-9263, M-F 8-5 CST or email us at techsupport@wenproducts.com
TROUBLESHOOTING GUIDE
| PROBLEM | SOLUTION |
| 1. No Display. | 1. Check battery contacts or replace the battery. |
| 2. Digits do not display correctly. | 2. Reset the caliper: Remove the battery for 30 sec- onds, then reinstall the battery and turn ON the tool. |
| 3. Digits Flashing | 3. Battery power is low. Replace with new battery. |
SAFETY PRECAUTIONS
Follow the safety precautions below to reduce the risk of damaging your caliper.
- Avoid exposure to any liquids and excessive humidity.
- Avoid exposure to electromagnetic fields.
- Do not expose the instrument to direct sunlight.
- Do not attempt to disassemble the instrument.
BATTERY REPLACEMENT & WARNINGS
Flashing of the digits on the LCD display indicates the battery power is low. Remove the battery cover and replace it with an identical battery (positive side facing upward).
WARNING! Follow the safety instructions below for handling and maintaining batteries.
- Do not short circuit batteries.
- Do not keep batteries near fire, sources of heat, or use in direct sunlight.
- Remove batteries from the tool when not being used for an extended period of time.
- Never handle leaked batteries. Do not dismantle batteries.
- Recycle used tools and batteries at your local recycling facility.
PLEASE READ THE FOLLOWING CAREFULLY:
- Remove and immediately recycle or dispose of used batteries according to local regulations and keep away from children. Do NOT dispose of batteries in household trash or incinerate them.
- Even used batteries may cause severe injury or death.
- Call a local poison control center for treatment information.
- The compatible battery type is CR2032 and the nominal battery voltage is 3V.
- Non-rechargeable batteries are not to be recharged.
- Do not force discharge, recharge, disassemble, heat above 158ºF, or incinerate. Doing so may result in injury due to venting, leakage, or explosion resulting in chemical burns.
WARNING
- INGESTION HAZARD: This product contains a button cell or coin battery.
- DEATH or serious injury can occur if ingested.
- A swallowed button cell or coin battery can cause Internal Chemical Burns in as little as 2 hours.
- KEEP new and used batteries OUT OF THE REACH of CHILDREN.
- Seek immediate medical attention if a battery is suspected to be swallowed or inserted inside any part of the body.
NEED HELP? CONTACT US!
Have product questions? Need technical support? Please feel free to contact us:
- 1-847-429-9263 (M-F 8 AM-5 PM CST)
- TECHSUPPORT@WENPRODUCTS.COM
FREQUENTLY ASKED QUESTIONS
What is the price of the WEN 10764 Electronic Digital Caliper?
The WEN 10764 Electronic Digital Caliper is priced at $31.23, offering great value for its precise measurements and durable construction.
What is the measurement range of the WEN 10764 Electronic Digital Caliper?
The WEN 10764 Electronic Digital Caliper has a measurement range of up to 6.1 inches, making it suitable for a wide variety of measurement tasks.
What is the material construction of the WEN 10764 Electronic Digital Caliper?
The WEN 10764 Electronic Digital Caliper is made of stainless steel, ensuring durability and resistance to corrosion over time.
What is the accuracy of the WEN 10764 Electronic Digital Caliper?
The WEN 10764 Electronic Digital Caliper offers an impressive accuracy of +/- 0.0001 inches, making it highly precise for detailed measurements.
What are the dimensions of the WEN 10764 Electronic Digital Caliper?
The WEN 10764 Electronic Digital Caliper has product dimensions of 16.5 x 3.25 x 0.75 inches, which provides a compact and convenient tool for precision measurements.
What is the weight of the WEN 10764 Electronic Digital Caliper?
The WEN 10764 Electronic Digital Caliper weighs 5.92 ounces, making it lightweight and easy to handle for extended periods of use.
What is the model number of the WEN 10764 Electronic Digital Caliper?
The model number for this digital caliper is 10764, which helps identify it as part of the WEN product line.
When was the WEN 10764 Electronic Digital Caliper first available?
The WEN 10764 Electronic Digital Caliper was first available on September 17, 2018.
Who is the manufacturer of the WEN 10764 Electronic Digital Caliper?
The WEN 10764 Electronic Digital Caliper is manufactured by WEN, a well-known brand recognized for producing quality tools.
Where is the WEN 10764 Electronic Digital Caliper made?
The WEN 10764 Electronic Digital Caliper is made in China, where many precision tools are produced.
What is the range in inches of the WEN 10764 Electronic Digital Caliper?
The WEN 10764 Electronic Digital Caliper can measure up to 6.1 inches, providing versatility for different measurement applications.
What kind of material is used in the WEN 10764 Electronic Digital Caliper?
The WEN 10764 Electronic Digital Caliper is made of stainless steel, ensuring a sturdy, rust-resistant, and long-lasting tool.
How precise is the WEN 10764 Electronic Digital Caliper?
The WEN 10764 Electronic Digital Caliper is highly precise, with an accuracy of +/-0.0001 inches, perfect for detailed measurement tasks.
How does the WEN 10764 Electronic Digital Caliper measure?
The WEN 10764 Electronic Digital Caliper uses a digital scale to provide accurate and easy-to-read measurements in both inches and millimeters.
What is the main advantage of using the WEN 10764 Electronic Digital Caliper?
The main advantage of the WEN 10764 Electronic Digital Caliper is its high accuracy and durability, which ensures reliable measurements for a wide variety of tasks.
DOWNLOAD THE PDF LINK: WEN 10764 Electronic Digital Caliper Instruction Manual
